Send Email
Send SMS
Search
Nunes Instruments
Nunes Instruments

Home » Products »


Civil & Survey Products

Nunes Instruments Provided in Civil and Survey products

Hydration Apparatus

REQUEST CALLBACK

Hydration Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Gross Weight80 kg
ModelVTF-1.9
MakeV-TECH
Max.Temperature1000 degree C
Rated Power Wattage2.5 kW
Inner Dimensions (mm) WxDxH200 x 120 x 80
Outer Dimension (mm) WxDxH595 x 410 x 467
Power Supply220V / 50Hz

 

Model No.: VT-1016

Standards: IS 11262-1985, ASTM C 186

Specification: This equipment is required to determine the heat of hydration of cement as expressed in calories per gram. The equipment comprises of the following:
A wide mounted double walled vacuum flask with a stop cock 38 mm & a insulating container for the flask
A Beckman thermometer (Range 5° C) held tightly by the cock stopper in such a way as to avoid accidental contact with the stirrer blade & the reading lens. To facilitate the easy removal the cock stopper is in two halves.
A constant speed stirrer (double bladed propeller type)extended to within 38 mm from the bottom of the flask.
A funnel (Gooch type) with a stem of 6 mm inner dia & a body approx 25 mm long and 25 mm dia. is fitted to the cock stopper for introducing the sample.

 

Yes! I am Interested

AGGREGATE CRUSHING VALUE

REQUEST CALLBACK

AGGREGATE CRUSHING VALUE
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
MaterialMild Steel
BrandV-Tech
Automation GradeManual
Thickness200 to 230 mm
ColorBlue
Plunger Size148mm dia x 100 to 115mm height
ColourMulti

As Per IS 2386 (P-IV) Specification :The selection of proper aggregate for a givenapplication is essential to attain the desired quality. Various characteristics are requiredto be determined for the selection of appropriate aggregate from the wide range available.Aggregate crushing value test apparatus is used for measuring resistance of an aggregateto crushing. Made of Mild Steel comprising of: Cylindrical Cell, 150mm internal dia x 130to 140mm height, Plunger, 148mm dia x 100 to 115mm height, Base Plate, 200 to 230mmsquare x 6mm thickness, Tamping Rod, 16mm dia x 450 to 600mm length. Metal Measure,110mm internal dia x 180mm height



Additional Information:

  • Delivery Time: 2-3 weeks
Yes! I am Interested

AIR CURTAIN

REQUEST CALLBACK

AIR CURTAIN
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 12,399 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandV TECH
Door Sizeupto 6ft
Usage/ApplicationIndustrial
Air Velocity>20-22 m/s
Noise Level<75 dB
ColorWhite
Dimensions930*185*209mm

 

Air Curtain is a modern device which, when installed on a door, forms an invisible curtain of continuous air and thus prevents escape of conditioned air and entry of ouside hot, humid, dirty and unwanted polluted air. The cabinet of Air Curtain are made of high quality cold rolled Mild Steel sheets. The blowers are made of high quality aluminium sheets, duly balanced both, statically as well as dynamically on computerised digital balancing machines, designed to provide uniform air with minimum noise and no vibration. All nits are thoroughly tested at works and meet the highest standards. The motors used are of continuous rating with sealed ball-bearings.

HIGH VELOCITY, MODELS (Approx 10 meters/second).

(a)         Size Door Width 600 m.m. (High Velocity)

(b)         Size Door Width 900 m.m. (High Velocity)

(c)         Size Door Width 1200 m.m. (High Velocity)

(d)         Size Door Width 1500 m.m. (High Velocity)

(e)         Size Door Width 1800 m.m. (High Velocity)

 



Additional Information:

  • Delivery Time: 2-3 weeks
Yes! I am Interested

Automatic Level

REQUEST CALLBACK

Automatic Level
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 14,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationCivil and Survey
UsageCIVIL
Model NumberVT0331
BrandAll Type of Brand Available
Is It MagneticMagnetic
Telescope Resolving PowerUpright
I Deal InNew Only
Objective Aperture42 mm

Product DescriptionThe VT100 automatic level series are dependable, durable and economic tools designed for your daily levelling tasks in the construction site.With three different types of magnification,a new solid-built design and IP54 protection, with a full range of accessories and services, the V TECH automatic levelsprovide great quality at affordable value.
Yes! I am Interested

View PDF

Beam Mould

REQUEST CALLBACK

Beam Mould
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3,950 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Size7.75 x 3.20 x 12.00 inch
Weight2.75 lb
Automation GradeAutomatic
BrandV TECH
OEM ServiceYes
WarrantyOne year warranty
Battery Life30 Hours (Alkaline)

 

Beam mould is used for concrete hardened testing.The material is cast iron and steel. The top brim is special design and avoids defacing the machined surface. Inner surface are all machined by grind mahcine.
Beam mould is designed for concrete hardened testing. Manufactured from cast iron with clamped on type steel base plate in order to conform to the strict specifiction of the standards.

 

Dimension(mm)

weight(Kg)

Remark

100*100*500

30

Cast iron

150*150*750

55

Cast iron

 



Additional Information:

  • Item Code: TIF-5550-A
Yes! I am Interested

View PDF

CENTRIFUGE EXTRACTOR

REQUEST CALLBACK

CENTRIFUGE EXTRACTOR
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 7,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
ModelVt-,Vt-A
ColorBrown
MaterialWood
Air Velocity1 FPM or 0.01 MPS
ColourMulti
Relative Humidity5.0 to 95 Percentage RH
Temperature20 to 80 Degree C

 

Model No.: VT-1305

Standards: ASTM D2172, AASHTO T-58, T-164

Centrifuge Extractor (Hand Operated) Description: V-Tech an eminence manufacturer & supplier of testing instrument Centrifuge Extractor (Hand Operated), model no. VT-1305 conforms to the ASTM D2172, AASHTO T-58, T-164 industry standards. Centrifuge Extractor (Hand Operated) is basically used in checking and determining the quantitative Bitumen percentage in the bituminous mixtures. In Bituminous mix, a solvent is added and by centrifugal action bitumen is removed. In detail, the bowl is mounted on the vertical shaft that protrudes from the cast housing. The bowl, mounted on a shaft, is rotated manually very fast by the enclosed gears in the cast body with the attached handle. Then, the solvent is added slowly through the housing cap holes. An external drain is provided which collect the dissolved Bitumen that is coming out of the moving/rotating bowl and collected in the housing.

V-Tech Centrifuge Extractor (Hand Operated) is successfully utilized in diverse parts of the different industries varying from automobile, food, pharmaceuticals, manufacturing, oils & gas etc.

Specification:

  • Comes with Cylindrical Aluminum rotor bowl with a capacity to carry 1500 gms sample mix, which is easily removable.
  • A cap for the bowl, which prevents leakage too.
  • A nut to for tightening the cap and bowl

 



Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

Cement Autoclave

REQUEST CALLBACK

Cement Autoclave
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 89,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Temperature Range-20 degree ~60 degree C
RangesAuto ranging 0-20ppm
Noiseless than 0.25 ppb
Span driftless than 0.5% of reading
Response time30 seconds to 95%
Altimeter Range0~5000 Meter
Barometer Range700~1000 hPa

 

Model No.: VT-1015

Standards: IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141

Specification: The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.

Note: Ordinary laboratory cement autoclave with mild steel chambers are also available

 



Additional Information:

  • Delivery Time: 2-3 weeks
Yes! I am Interested

View PDF

Compaction Factor Apparatus

REQUEST CALLBACK

Compaction Factor Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 18,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Materialstainless steel
BrandV-tech
Magnification Power3 AAA batteries
Automation GradeManual
ColorWhite
Diameter16 mm
Size38 mm
Size/DiameterApprox.15.5x24.5x19.7cm/6.10x9.65x7.76''
Mi1 Piece

Product Description: V-Tech India manufactures compaction factor apparatus that has been designed as per the international standards and requirements of construction industry. The apparatus allows determining the workability of different types of concrete mixes by assessing the compaction ratio. Having a simple set up, the compaction factor apparatus performs stably and is guaranteed for high durability. It can be used ‘on site’ and the workability of the concrete mix could be easily determined in less of time.

Compaction Factor Apparatus Product specifications :
Compaction factor apparatus from V-Tech India has the following specifications

  • The apparatus is made as a rigid metallic frame that has two conical hoppers and one cylinder at its base
  • The conical hoppers have hinged trapdoors with quick release catchers at the lower end
  • The cylinder top is covered with a circular metal plate
  • A plaster trowel and a metal rod rounded at both ends (600 mm in length and 16 mm in diameter) is also provided

Our compaction factor apparatus has been developed with the best quality materials like stainless steel and delivered appropriate finishing and dimensional accuracy to ensure precise results for the engineers and technicians. The compaction factor apparatus conforms to the standards IS 1199 and 5515 and BS 1881 – 103.



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Compression Testing Machine

      REQUEST CALLBACK

      Compression Testing Machine
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 99,500 / UnitGet Latest Price

      Product Details:
      Minimum Order Quantity1 Unit
      Machine TypeCNC Machine
      ApplicationIndustrial Use
      Calibration IntervalYearly
      Brand/ModelLabgo
      Services ChargeExtra
      Usage/ApplicationIndustrial
      Instruments to be RepairedYes
      BrandV-Tech
      Ranges50 kN to 3000 kN
      Flow RateFree flow
      Power requirementNominal 220 V
      Sampling Time28 hours

       

      Specification: The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings.

      Optional:

      1. Ranges: 50 kN to 3000 kN
      2. Channel and Pillar Type Both Are Available.
      3. Extra gauges can be attached to the machine (max. 1 nos. )
      3. Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Concrete Flow Table

      REQUEST CALLBACK

      Concrete Flow Table
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 29,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      BrandV-Tech
      ApplicationIndustrial
      ColorMulti
      PowerDC 1.5 V x 1
      Flow Rate0.5 to 2.0 LPM
      Size and Weight155 x 82 x 60 mm; 1.2 kg.
      Filter25mm dia
      BatteriesNi Cd. rechargeable.
      Dimension145 x 80 x 38 mm
      Measure range0~200 Gu

       

      V-Tech is a renowned organization that manufactures and supplies the concrete flow table test set, which is used for high capacity concrete mix and to maintain a flow index by the means of arithmetic. It supplies this product in the reputed construction projects under governmental and non-governmental organizations.

      Quality standard of the products : In V-Tech we are professional enough to maintain standard qualities of the products. The concrete flow table test set is manufactured by the means of International standard EN 12350-5.

      Product Description : The dimension of the apparatus is 700 X 850 X 300 mm and the weight is 40 kg. Between the two tables, the measurement of the upper table is 700 X 700 mm. The top diameter of the stainless steel cone is 130 +/- 2; the height and base diameter are both 200 +/- 2 and its thickness is 1.5 mm. Set 1106 is for a concrete flow test, Set 1106 A is for cone flow and Set 1106 B is made of wooden tamper 40 X 40 X 335.

       

      Concrete flow table test set

      Flow cone for

      Wooden tamper 40 x 40 x 335 mm

       

      Specification:

      • The apparatus is made of a double steel table
      • The flow index is shown in the arithmetic count.
      • The upper table is hinged on the lower one.
      • The top table is corrosion protected.

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Cube Mould

      REQUEST CALLBACK

      Cube Mould
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 1,250 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      UsageIndustiral
      Weight17 Kg
      ColorMulti
      BrandV Tech
      Iron Mortar Cube Mould50mm,Three Gang
      Mild Steel Cement Cube Mould70.6mm,with Loose Base Plate

       

      Product Description: V-TECH India manufactures high quality metallic cube moulds for testing and analysis of the specimens for the parameters of strength, compaction and others. We make very precise moulds as per the demands of construction engineers and laboratories catering the civil engineering verticals. The moulds are made as per the Indian and British standards and conform to all the desirable dimensional characteristics sought for accurate testing. The metallic cube moulds of SE-Test India are developed with the best grade steel and cast iron material to ensure highest quality and finishing of them. Durability is also maximized due to non corrosive and rust resistant nature of the cube moulds.

      Product Specifications –
      Find out the objective specifications of our cube moulds here below –

      • Metric sized cube moulds are available with machined flat surfaces and +/- 0.2 mm accuracy attributes while finishing is within 0.2 mm
      • Inch sized cube moulds are offered as machined flat with +/- 0.01 inch accuracy and with 0.01 inch finish
      • The metal moulds are delivered complete with their base plate of metal together with the fasteners, clamps and springs

      Our metal cube moulds are made as per the industry requirements and are used for high level testing of specimens towards ensuring core stability and strength of structures and buildings.

      Standards:

       

      · A Cast Iron Mortar Cube Mould 50mm, Single Gang

      · B Cast Iron Mortar Cube Mould 50mm, Three Gang

      · C Mild Steel Cement Cube Mould 70.6mm, with Loose Base Plate

      · D Cast Iron Concrete Mould 75mm Single Gang

      · E Cast Iron Concrete Mould 100mm Light Weight

      · F Cast Iron Concrete Mould 100mm Clamp Type (8.5 KG) Four Part

      · G Cast Iron Concrete Mould 150mm Light Weight 8KG

      · H Cast Iron Concrete Mould 150mm ISI Marked

      · I Cast Iron Concrete Mould 150mm Clamp Type (18 KG) Four Part

      · J Cast Iron Concrete Mould 150mm Clamp Type (16 KG) Two Part

      · K Plastic Mould 150mm

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Cylindrical Mould

      REQUEST CALLBACK

      Cylindrical Mould
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 3,950 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Machine TypeSemi-Automatic
      ApplicationIndustrial
      Capacity25kg/hr
      ColorMulti
      BrandV Tech
      Accuracy range+/- 0.2 mm

       

      Product Description: V-Tech manufactures cylindrical moulds of metal for specimen testing and analyses of concrete columns. We make cylindrical moulds in standard sizes that are widely used by the civil engineering labs in India and world for testing the compression, linearity, stability and other essential attributes of concrete columns. The moulds are delivered high quality finish at its inner surface to ensure that best specimens are derived without any imperfection. Our cylindrical mould is developed with high grade steel and cast iron material that offer strength and durability, especially the rust and corrosion resistance. The dimensional make of the moulds is such that deformation is negligible even after continued and regular use of them.

      Product Specifications –
      Find the objective specifications of metal cylindrical moulds of V-Tech India here below –

      • The mould is made as split type with two equal segments that can be combined accurately
      • Base plate and top plate are offered together with cylinder. Fasteners are also provided
      • Base plate and top plate are machined flat to +/- 0.03 mm
      • Mean diameter (internal) of the moulds is within the accuracy range of +/- 0.2 mm
      • Height of the metal cylindrical mould is within accuracy range of +/- 1 mm

      Cylindrical moulds of V-Tech India are made with highest precision & these serve well the demands of engineers and technicians. Our moulds can be used easily on site to make the specimens.

       

      Mould cylinder, cast iron, 150mm dia. x 150mm height.

      Mould cylinder, cast iron, 150mm dia. x 300mm height.

      Mould cylinder, cast iron, 160mm dia. x 320mm height.

      Mould cylinder, cast iron, 100mm dia. x 200mm height.

      Mould cylinder, cast iron, 300mm dia. x 600mm height.

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Densitometer

      REQUEST CALLBACK

      Densitometer
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 4.7 Lakh / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Materialiron/ mild steel
      UsageIndustrial
      ApplicationLaboratory
      ModelVT-SPDC108
      Design TypeCustomised
      Brand/MakeV-Tech
      ColorMulti
      Power SourceElectric
      Face partflat

       

      SPECIFICATIONS

       

      Range

      Density: 0.0000 to 2.0000 g/cm3

      Precision

      ±0.001 g/cm3

      Resolution

      0.0001 g/cm3

      Temperature range

      0 to 40°C

      Display content

      Density, temperature compensated density, specific gravity, temperature compensated specific gravity, Brix %, alcohol concentration, sulfuric acid concentration, API degree, Baume degree, Plato and Proof degree, etc.

      Temperature
      compensation

      10 kinds of coefficients per sample plus temperature to be corrected can be entered.

      Auto calibration

      Can store density of water at various degrees of temperature required for calibration of the measuring cell.

      Sampling

      By syringe type hand pump.

      Data storage

      1,100 samples

      External output

      IrDA for Personal computer

       

       

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      View PDF

      Flexure Testing Machine

      REQUEST CALLBACK

      Flexure Testing Machine
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 42,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Weight12 Kgs
      Calibrated ForCustomer Requirement
      Range0.1 to 10 ppm
      Calibration IntervalYearly
      Industry TypeVT-NM08
      Instrument TypeTesting Instrument
      Number of Instruments1
      Driftless than 0.3%
      Linearityless than1% of FS
      Power demand220 V AC
      Brand/ModelV-Tech

       

      Model No.: VT-1140

      Specification: The Flexure Strength Testing Machines are designed to provide maximum rigidity throughout their working range. The load is applied by the upward movement of a hydraulic ram. The jack can be raised or lowered for testing different size beams. The load is indicated on a calibrated Bourdon tube type Pressure Gauge of range: 0-100kN x 0.5kN (0-10,000 kgf x 50 Kgf). The load gauge is calibrated against NPL/ NCCBM certified proving ring.

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      View PDF

      Flow Table

      REQUEST CALLBACK

      Flow Table
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 12,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Calibration IntervalYearly
      Calibrated ForCustomer Requirement
      Number of Thermometers1
      Brand/ModelV-Tech
      Thermometer TypeDigital
      Wind Speed0 to 100 Km/hr
      Wind Direction0 to 360 degrees
      Solar RadiationLi-Cor
      Memory Capacity45days

       

      Model No.: VT-1006

      Standards: IS: 6932 (PART VIII), ASTM C 230, BS 4551:1

      Specification: The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. at base and 40mm i.d. at top, height of the mould 90mm.

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      GILLMORE NEEDLE APPARATUS

      REQUEST CALLBACK

      GILLMORE NEEDLE APPARATUS
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 5,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      ApplicationIndustrial
      ColorMulti
      BrandV-Tech
      Diameter of the finger16 mm
      Dimension of test specimen250 X 50 mm
      Load on the finger900 g

       

      Model No.: VT-1005

      Standards: ASTM C 266

      Specification: A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia. ¼ lb. Wt. 1 no. Final needle 1/24 inch dia. ¼ lb. Wt. 1 no. Glass base plate. Complete as above.

       



      Additional Information:

      • Delivery Time: 1-2 week
      Yes! I am Interested

      GPS

      REQUEST CALLBACK

      GPS
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 15,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      UsageCar
      TypeWireless,Wired
      Screen Size2.5 inch,3.5 inch
      Power+5VDC supply
      Standard RawNMEA0183 Strings
      Serial Interface4800 bps TTL

      We are providing Global Positioning System. Does your project need to be able to track its position globally? When used in an outdoor environment, the GPS Receiver with its integrated patch antenna can provide standard raw NMEA0183 strings or specific data from up to 12 satellites via a standard serial interface. The module provides current time, date, latitude, longitude, altitude, speed and travel direction/heading among other data, and can be used in a host of applications, including navigation, tracking systems, mapping, fleet management and robotics.

      Other Detail:

      • This device can be connected to a PC serial port using a MAX232 line driver.
      • Single-wire 4800 bps TTL Serial interface to Microcontrollers.
      • Provides either raw NMEA0183 strings or specific data, making it easier to use on the microcontrollers
      • Simple/raw mode selectable via I/O control

       

      Yes! I am Interested

      View PDF

      Le Chatelier Flask

      REQUEST CALLBACK

      Le Chatelier Flask
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 1,450 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Model NoVT-DR194 A
      ApplicationIndustrial
      BrandV Tech
      ColourMulti
      Logic ControllerPLC Programmable
      Test speedAdjustable
      Touch Screen7 inch TFT
      UsageMeasure Tensile

       

      Model No.: VT-1011

      Standards: IS 4031 1968, ASTM C 188

      Specification: Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia. of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia. in that fits a ground glass stopper. The neck has over-all 11mm i.d. upper portion is graduated from 18ml to 24ml with 1 ml graduation. Just at the bottom of the neck 1 ml capacity is marked in between there is 17 ml capacity bulb.

       

      Yes! I am Interested

      Le Chatelier Mould

      REQUEST CALLBACK

      Le Chatelier Mould
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 1,950 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Gauge TypeAnalogue Instrument Meter
      Calibrated ForCustomer Requirement
      Brand/ModelV-Tech
      Calibration IntervalYearly
      Power SupplyAC
      Range20-140 dBA
      Instruments To Be RepairedYes
      Time weightingFast,Slow,Impulse
      Resolution0.1 dBA
      TelemetryGPRS / EDGE / 3G
      CommunicationRS 232 / USB

      Model No.: VT-1010

      Standards: IS 269, 712, 5514, 1727 , 2645, 6932 ( PART IX) BS 6463

      Specification: It consists of a small split cylinder forming a mould. On either side of the split cylinder. Two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Longitudinal Extensometer

      REQUEST CALLBACK

      Longitudinal Extensometer
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 18,000 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Colormulti
      ApplicationIndustrial
      BrandV Tech
      ModelVT-2034
      Dial Indicator.002 mm
      Load Applied SensitivityApprox 1/2 kg. division
      Ring Capacity130 kg

      Model No.: VT-1130

      Standards: ASTM C 469

      Specification: Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder. A dial gauge .002 mm x 5 mm is mounted on the upper ring and the tie of the dial gauge rests on an anvil. The zero on the dial gauge can be set by adjusting the anvil screw. Supplied in a wooden carrying case.

       



      Additional Information:

      • Delivery Time: 1 week
      Yes! I am Interested

      POWER FLOATER MACHINE

      REQUEST CALLBACK

      POWER FLOATER MACHINE
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 36,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      ColorMulti
      I deal inNew Only
      Display Size3 1/2 (13 mm)
      Display TypeLCD
      Dissolved Oxygen Range0~20 mg/L
      Oxygen in Air0~100.0%
      Temperature0~50 C (32~140 F)

       

      Model No.: VT-1147

      Empowered with innovative technologies and advanced production unit, we are a renowned manufacturer and supplier of premium quality Power Floater Machine. The offered machine is used for smoothing the surfaces of marbles by rubbing on it. This machine is manufactured using supreme quality components by our adept professionals at our advanced production unit. In addition to this, clients can avail this Power Floater Machine from us at competitive prices.

      Features:

      • User friendly
      • Noise-free operation
      • High performance
      • Sturdy design

       

      Specification :

      Powered :3 H.P. Electric motor through gear box
      Floating : 130 RPM

      Technical Details:

       

      Model

      Dia

      Handle Length

      Handle Height

      Weight

      Dise Thickness

      Prime Mover

      Power Rating

      VT-401

      1000 mm

      1600 mm

      Adjustable

      70 kg.

      5 mm

      Gear Motor

      3 H.P.

       

      Yes! I am Interested

      Planck Constant

      REQUEST CALLBACK

      Planck Constant
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 59,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Warranty18 Month
      Max Turning Diameter500-1000 mm
      Power SourceElectricity
      FeaturesEducational
      Usage ApplicationLaboratory Experiment
      1 Gauss resolution2k range and 20 K range
      Actual sensing area1 sq.mm from the tip
      Calibrated transverse Hall Probe50 mm x 1.5 mm

      1. Determination of Planck’s Constant and Work Function of Materials by Photoelectric

      Effect

      It was observed as early as 1905 that most metals under influence of radiation, emit electrons. This

      phenomnon was termed as photoelectric emission. The detailed study of it has shown.

      1. That the emission process depends strongly on frequency of radiation.

      2. For each metal there exists a critical frequency such that light of lower frequency is unable to liberate

      electrons, while light of higher frequency always does.

      3. The emission of electron occurs within a very short time interval after arrival of the radiation and

      member of electrons is strictly proportional to the intensity of this radiation.

      The experimental facts given above are among the strongest evidence that the electromagnetic field is

      quantified and the field consists of quanta of energy E= hn where n is the frequency of the radiation and h is

      the Planck’s constant. These quanta are called photons.

      Further it is assumed that electrons are bound inside the metal surface with an energy ef, where f is called

      work function. It then follows that if the frequency of the light is such that

      hn > ef

      it will be possible to eject photoelectron, while if hn

      excess energy of quantum appears as kinetic energy of the electron, so that

      hn = 2

      1 mv2 + ef

      which is the famous photoelectrons equation formulated by Einstein in 1905.

      The energy of emitted photoelectrons can be measured by simple retarding potential techniques as is done

      in this experiment. When a retarding potential V0 is used to measure kinetic energy of electrons Ee, we

      have,

      Ee =2/1 mv2 = eV0 or V0 = eh

      n - f

      So when we plot a graph V0 as a function of n, the slope of the straight line yields h and the intercept of

      extrapolated point n=0 can give work function f.

      2. To verify inverse square law of radiation using a photoelectric cell

      If L is the luminous intensity of an electric lamp and E is the illuminanscence (intensity of illumination) at

      point r form it, then according to inverse square law.

      E = L/2 r

      If this light is allowed to fall on the cathode of a photo-electric cell, then the photo-electric current (I) would

      be proportional to E.

      E = L/2 r=K.I

      Hence a graph between

      r 2 1

      and I is a straight line, which verify the inverse square law of radiation.

      THE APPARATUS CONSIST OF THE FOLLOWING :

      1. Photo Sensitive Device : Vacuum photo tube.

      2. Light source : Halogen tungsten lamp 12V/35W.

      3. Colour Filters : 635nm, 570nm, 540nm, 500nm & 460nm.

      4. Accelerating Voltage : Regulated Voltage Power Supply

      Output : ± 15 V continuously variable through multi-turn pot

      Display : 3 ½ digit 7-segment LED

      Accuracy : ±0.2%

      5. Current Detecting Unit : Digital Nanoammeter

      It is high stability low current measuring instrument

      Range : 1000 μA, 100 μA, 10 μA & 1μA with 100 % over ranging facility

      Resolution : 1nA at 1 μA range

      Display : 3 ½ digit 7-segment LED

      Accuracy : ±0.2%

      6. Power Requirement : 220V ± 10%, 50Hz.

      7. Optical Bench : The light source can be moved along it to adjust the distance between light source and

      phototube. Scale length is 400 mm. A drawtube is provided to install colour filters, a focus lense is fixed

      in the back end.

      Yes! I am Interested

      View PDF

      Proving Ring

      REQUEST CALLBACK

      Proving Ring
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 6,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      BrandV-Tech
      ModelVT-OC102
      Size300x130x400
      UsageLaboratory
      ColorMulti
      CapacityAs required

       

      Model No.: VT-1249

      Capacity: 25kgf to 100kgf (1KN) 200kgf (2KN) 250kgf (2.5KN) 1000kgf (10KN) 2000kgf (20KN) 2500kgf (25KN) 3000kgf (30KN) 5000kgf (50KN) 100KN (10Tons) 200KN (20Tons) 500KN (50Tons) 1000KN (100Tons) 2000KN (200Tons), 3000KN (300 Tons)

      Specification: The Proving Rings are made of special steel, carefully forged to provide high and stable accuracy, dependability and repeatability. The dial gauge and anvil are mounted on U-brackets clamped to the ring body by set screws.

       



      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Rebound Hammer

      REQUEST CALLBACK

      Rebound Hammer
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 9,500 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      BrandV TECH
      Warranty10 Month
      Is It PortablePortable
      Usage/ApplicationLaboratory
      Display TypeDigital
      Impact Energy2.207Nm (1.63ft-lbf)
      Compressive Strength1,450 10,152psi 10 70MPa
      Product Dimensions2.1 x 14in (53 x 356mm), Dia.xH
      Estimated Shipping Weight5.0lb (2.27kg)
      ColourMulti

      Names / model

      Schmidt Hammer V-Tech SH-225

      Schmidt Hammer V-Tech SH-75

      Schmidt Hammer V-Tech SH-20

      Measurement range of strength, MPa

      10 – 60

      10 – 60

      1 – 25

      Impact energy, J

      2207

      735

      196

      Minimum thickness of testing object, mm

      70 and more

      50 – 100

      30 and more

      Measurement accuracy, %

      10

      Hardness value of impact plunger working surface, HRC, no less

      60

      Surface roughness of testing object, Ra um, no worse

      40

      Radius of impact plunger, mm

      25

      Operating temperature range, ° C

      -20 … +50

      Weight, kg, no more

      1

      Concrete test hammer 
      Applied to test compressive strength of  hardened concrete
      Measuring ranges: 10-60MPa
      Impact energy: 2.207J
      Size:  L280mm*D54mm
      N W: 1kg


      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      View PDF

      Serological Water Bath

      REQUEST CALLBACK

      Serological Water Bath
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 9,990 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      Usage/ApplicationIndustrial
      MaterialAluminium Alloy
      BrandV-Tech
      ModelVT4544
      Controller100 C
      ColorSilver
      Warranty12 Month
      Automation GradeAutomatic
      Is It CustomisedCustomisation
      I deal inNew Only

       

      These units are double walled with inner chamber made up of S.S. sheet and outside of M.S. duly enamel painted. The gap between the walls is filled with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as standard accessory. Temperature from ambient to 100°C is controlled by "EGO"/JUMO" GERMAN Hydraulic Capillary type thermostat with an accuracy of

      ± 0.5°C. Supplied complete with 220/230 volts A.C. supply.

      WIDTH x HEIGHT x DEPTH

      (a)         300 x 250 x175mm (for 2 rack)

      (b)        330 x 300 x175mm (for 4 rack)

      (c)         455 x 300 x175mm (for 6 rack)

      (d)        605 x 300 x175mm (for 8 rack)

      OPTIONAL ACCESSORIES :

      (a)         Stirring arrangement with 1/20 H.P. motor and speed regulator.

      (b)        Digital Temperature indicator - cum - Controller.

      (c)        PI Digital Temp. Indicator-cum-Controller [stirring arrangement compulsory]

       

      Yes! I am Interested

      Slump Test Apparatus

      REQUEST CALLBACK

      Slump Test Apparatus
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 1,650 / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      BrandV TECH
      Usage/ApplicationIndustrial
      Voltage230 V
      Diameter200 mm
      PowerElectric
      ColorMulti
      PhaseSingle
      Reel Diameter1 meter (1.5yards in cast of British system)
      Speed of Reel75 rpm

      Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape two clamps slide over the foot grips of a standard slump cone and hold it securely while filling and rodding. A Combination swivel carrying handle. Complete with graduated temping rod 0-60cms long and 16mm dia with 0-30cms scale graduation. Accessories :- Slump Cone 10cms top dia, 20cms bottom dia and 30cm heightSlump Test Apparatus Product specifications –

      Here are the objective specifications of our slump test apparatus –

      • The apparatus can be used for concrete mixes with maximum aggregate size of 38 mm.
      • There is a slump cone made of steel. Its lower base diameter is 200 mm while at the top, it has diameter of 100 mm. Height is 300 mm.
      • Foot pieces can be fixed to the clamps provided at the base plate. A lifting handle is also attached with the base plate for easy handling
      • A 600 mm long and 16 mm wide graduated steel rod is provided as part of the apparatus.


      Additional Information:

      • Delivery Time: 2-3 weeks
      Yes! I am Interested

      Spectrometer

      REQUEST CALLBACK

      Spectrometer
      Get Best Quote

      Thanks for Contacting Us.

      Approx. Rs 1.89 Lakh / PieceGet Latest Price

      Product Details:
      Minimum Order Quantity1 Piece
      BrandV-Tech
      FeaturesAs per datasheet
      Tube Voltage100-240V
      Colorgrey
      Insertion Depth10 mm
      Range2-15 kg(x 105 pa)
      Weight0.3 kg

      Product Description

      Features

      · Suitable for1H and11F nuclei

      · FET based marginal Oscillator

      · Digital Display of frequency and current

      · Clear display of resonance peaks

      · Compatible with general purpose CRO

      Introduction

      Nuclear Magnetic Resonance (NMR) was discovered by Bloch and Purcell in the year 1945. Over the years it has developed into a very useful and powerful tool in solid state physics, chemistry and biology. In medical application this technique, under the name Magnetic Resonance Imaging (MRI) has been developed as an excellent imaging method for clinical diagnosis. In this method use is made of Zeeman interaction of the magnetic dipoles associated with the nucleus when placed in a external magnetic field.

      Elementary Magnetic Resonance

      An atom whose nucleus has a nulcear spin I will have a magnetic moment as follows

      = gnI (1)

      where nis nuclear magneton, and g is g-factor. Under the influence of an external static magnetic field (H), these nuclear magnets can orient in distinct directions. Each spin orientation corresponds to a particular energy level given by

      E = gnHmj(2)

      with mj= -I, -(I-1), ...............(I-1), I

      where mjis magnetic quantum number

      The splitting of levels will therefore be-

      DE = gnH or = hn0 (3)

      where n0is the r.f. frequency applied perpendicular to the static magnetic field. Now if the spins are subjected to a purturbation by an oscillating magnetic field with its direction parallel to the static magnetic field and its frequency n1such that the quantum hn1is equal toDE = hn0, we say that there is a resonance between n1and n0. This will induce transition between neighbouring sub levels (mj=I) and in turn will absorb energy from the oscillating field. Thus, at resonance, we get a peak due to the absorption of energy by the system.

      Experimental Technique

      In our experiment the NMR signals of Hydrogen nuclei and Fluorine nuclei are detected. Both have only two possible orientations in reference to static magnetic field H since both have proton spin I = 1/2. The sample is placed in an r.f.coil located between the gap of homogeneous magnetic field H. In order to exactly match equation (3), H is modulated at constant frequency (50Hz in our case) by using two modulation coils. Each time when the matching (resonance) condition (Eq. 3) is fulfilled, energy is absorbed from the r.f.coil due to the spin transition.
        Yes! I am Interested

        Test Sieve

        REQUEST CALLBACK

        Test Sieve
        Get Best Quote

        Thanks for Contacting Us.

        Approx. Rs 1,250 / PieceGet Latest Price

        Product Details:
        Minimum Order Quantity1 Piece
        Thermal Instrument TypeTesting Instrument
        Calibration IntervalYearly
        Number of Thermal Instruments1
        Thermal Instrument NamepH Meter
        Calibrated ForCustomer Requirement
        Brand/ModelV-Tech
        Flow Rate Range20 to 500 ml/min
        DisplayLCD 16 characters,4 line display
        BatteryRe-chargeable Li-ion battery
        Flow ControlAdjustable

         

        Product Specification

         

        Size

        200mm 300mm thread diameter for lab test sieve

        Open Micron

        0.026~7mm

        Weave Style

        Plain Weave

         

        Product Description

        We are offering a quality range Test Sieves, which are widely appreciated for high consistency, fit and stable functions. These are sourced from reliable vendors of the industry and are offered in customized solutions to meet client's requirements and specifications. Our range of Test Sieves are manufactured for various Household and Industrial usages.

         

        Specifications:

         

        B.S.S
        (410/1969)
        Mesh Nos

        A.S.T.M
        (11-70)
        Mesh Nos

        Indian Std
        (469 / 1972)

        Microns

        4

        5

        4.00mm

        4000

        5

        6

        3.35mm

        3353

        6

        7

        2.80mm

        2812

        7

        8

        2.36mm

        2411

        8

        10

        2.00mm

        2057

        10

        12

        1.70mm

        4000

        12

        14

        1.40mm

        1405

         



        Additional Information:

        • Delivery Time: 2-3 weeks
        Yes! I am Interested

        Theodolite

        REQUEST CALLBACK

        Theodolite
        Get Best Quote

        Thanks for Contacting Us.

        Approx. Rs 34,000 / PieceGet Latest Price

        Product Details:
        Minimum Order Quantity1 Piece
        Model Number/Name3455
        BrandV Tech
        Usage/ApplicationCivil and Survey
        Model NumberDE-2A
        Display TypeDual Display
        Magnification3ox
        LCD Displayyes
        Warranty10 month
        UsageAlignment of lines

        We are counted among the prominent organizations engaged in providing the customers with excellently designed Digital Theodolites. Fabricated using modern machinery & advanced techniques, our range comprises electro-optical distance gauzing devices for improved accuracy. Widely acknowledged for using absolute encoder's latest algorithm for facilitating easy inspection & gauzing of 3D vectors, the range is available in diverse infrared versions.

         

        Major attributes of the range are:

         

        • High operational accuracy
        • Robust construction
        • Excellent performance
        • Smooth & easy operation
        • Save power and display clearly

         

        Specifications :

         

         

           

          • Display mode : Double sides display
          • Tribrach type : Detachable
          • Tilt sensor: A Provide / B unprovided
          • Removable tribrach for multiple set-ups
          • Horizontal and vertical angle readout
          • Method : Incremental reading
          Yes! I am Interested

          View PDF

          Thermo Luminescence Irradiation Unit

          REQUEST CALLBACK

          Thermo Luminescence Irradiation Unit
          • Thermo Luminescence Irradiation Unit
          • Thermo Luminescence Irradiation Unit
          Get Best Quote

          Thanks for Contacting Us.

          Approx. Rs 1.89 Lakh / PieceGet Latest Price

          Product Details:
          Minimum Order Quantity1 Piece
          BrandV Tech
          Measuring Range0-1.8mm/ 0-71.0mil
          Min.diameter of substrate50mm
          Min.thickness of substrate0.5mm
          Operating humidity range10-95%RH
          Packing methodBlister Card
          Power supply21.5V AAA battery
          Resolution0.01mm/0.1mil
          Weight63.98g (without battery)
          overall Dimension65 x 31 x 108mm

          Product DescriptionWith the help of skilled professionals and good knowledgeable experience, we are involved in supplying, exporting and manufacturing quality-assured spectrum of Thermolumniscence Irradiation Unit in Roorkee, Uttarakhand, India.

          Experiment:
          * Microcontroller based menu driven
          * Cost effective solution
          * No radiation hazard
          * High quality double stage rotary pump
          * Long life tesla coil
          * Fully self contained

          Study of Thermoluminescence in alkali halide crystals need creation of F-centres (colour centres) in alkali halide crystals. To produce the F-centres, the crystals are exposed to ionizing radiation which in turn causes the loss of electron from halide ions. An electron then becomes trapped in the halide ion vacancy. The color is the result of the absorption of a photon by the trapped electron and excitation from the ground state to an excited state for the F-center. This is a classic case of particle in a box.

          The source of ionizing radiation could be X-rays, electrons, gamma rays etc. These techniques are too Expensive and unaffordable for normal laboratories. Another method, although little less efficient, is by keeping Alkali halide crystals under low pressure, in the proximity of high Voltage. This in turn produces F-centres in the crystals.

          This later technique has been adopted in this set up to make it economical and affordable for all laboratories. The setup is complete in itself and can be used straight away.

          Yes! I am Interested

          Total Station

          REQUEST CALLBACK

          Total Station
          Get Best Quote

          Thanks for Contacting Us.

          Approx. Rs 1.25 Lakh / PieceGet Latest Price

          Product Details:
          Minimum Order Quantity1 Piece
          Model Number/NameVT8545
          BrandV Tech
          Usage/ApplicationCivil andSurvey
          ColorMulti
          Magnification30x / 3Inch
          LCD Displayyes
          Magnifier30X
          Voltage6 V DC

          Total Station features include advanced RED-tech EDM for fast, pinpoint reflectorless measurement up to 500m. Its Long-Range Bluetooth® wireless communication provides data instantly to your Bluetooth-equipped controller, up to 500m away. Integrated TSshield provides unmatched remote ability to track, secure, and support your instrument. Its IP66 dustproof/waterproof rating, heavy-duty metal chassis and handle, and work-week battery life make the CX 100 Series the clear leader in conventional total stations.


          RED-tech Technology Reflectorless EDM

          • Fast distance measurement of 0.9s regardless of object.
          • Traditional pinpoint precision in reflectorless distance measurement.
          • Reflectorless operation from 30cm to 500m.
          • Coaxial EDM beam and laser-pointer provide fast and accurate aiming.
          • Ensures accuracy even with reflective sheets.


          Long Range Data Communication

          • The series of total stations features Bluetooth® Class1 wireless technology for reliable data communications.
          • All series data is instantly available at the Bluetooth-equipped controller.


          Advanced Angle Measurement System

          • VT565 Series features original absolute encoders that provide long-term reliability in any job site condition. Dual-axis compensator ensures stable measurements even when setup on uneven terrain.
          • Sokkia’s traditional motion clamp and tangent screw are employed to ensure stable angle measurement.


           

          Yes! I am Interested

          View PDF

          Vee Bee Consistometer

          REQUEST CALLBACK

          Vee Bee Consistometer
          Get Best Quote

          Thanks for Contacting Us.

          Approx. Rs 24,500 / PieceGet Latest Price

          Product Details:
          Minimum Order Quantity1 Piece
          BandV-Tech
          ColorMulti
          vibration table measurement380 mm
          Elastic supports height305 mm
          Maximum Daylight Opening between two jaws100 mm
          Maximum Sealing Length150 mm
          Maximum Sealing Width20 mm
          Temperature ZoneTwo
          Timer Range99.9 minutes/seconds

          The International standard of the product : In Se Test India Pvt. Ltd, we are proficient in taking care of the quality standard of the products. Therefore, we maintain both the national and International standard based on the customers. We work on the quality standard IS 1199 and BS EN 12350 respectively for the national and International customers.

          Product Description : The vibration table's measurement is 380 mm in length and 260 mm in width. The elastic support's height is 305 mm above the floor. The measurement of the tamping rod of the slump cone is 16 mm in diameter and it is rounded about 600 mm in each end.

          Specification:

          • The apparatus consists of a table, elastic support, a cord, a plug, and a stop and start switch.
          • There is a holder, which is fixed with the base and there is a swivel arm telescoped with the funnel.
          • There is also a swivel arm attached with the vibration table.
          There are the lifting handles in both the slump cones.


          Additional Information:

          • Delivery Time: 1-2 week
          Yes! I am Interested

          Vicat Needle Apparatus

          REQUEST CALLBACK

          Vicat Needle Apparatus
          Get Best Quote

          Thanks for Contacting Us.

          Approx. Rs 3,500 / PieceGet Latest Price

          Product Details:
          Minimum Order Quantity1 Piece
          BrandNunes Instruments
          Voltage220 V AC
          Test FluidGlycerin
          Gear BoxWorm reduction type
          ColorMulti
          Dimensions95 cm x 36 cm x 46 cm
          Opening In Lower Clamp38.1 mm diameter
          Rate Of Fluid Displacement95 cc/ minute
          Load Weight5 N,10 N
          Opening in upper clamp30.5 mm diameter
          Power required220 V AC,500 W,50 Hz single phase
          Roll DimDia 150 x Length 460 mm
          Rotation speed40 rpm

           

          Standards: IS 4031, 2645, 2542 ( PART-1), 1727, 5513 & 712. BS 12, 146, 915, 1370, 4027, 4246, 4248, AASHTO T 129, E 131.

          Specification: The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles.

          Accessories: Mild steel base plate 5 inches x 5 inches. Fulcrum mould , brass , 80 mm i.d. base dia x 70 mm i.d. top dia , 40 mm height.

          Note: Normally set of needles and mould which meet is requirements as per I.S. 5513 are supplied. While ordering please specify the specification code of the instrument required. Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc. As per ASTM C 187-58 C 472-62 C 110-58, IS 2542(Part-1) can also be supplied.

           



          Additional Information:

          • Delivery Time: 1-2 week
          Yes! I am Interested

           
          X


          Explore More Products

          Contact via E-mail
          Contact via SMS
          Nunes Instruments
          Sebastian Nunes (Nunes Instruments)
          Gopalapuram ,
          Coimbatore - 641018, Tamil Nadu, India
          Call Us: 
          Call Response Rate: 97%
          Share Us :
          F G T L



          Home  |   Profile   |  Products  |  Site Map  |   Contact Us

          © Nunes Instruments. All Rights Reserved (Terms of Use)
          Developed and Managed by IndiaMART InterMESH Limited

          Nunes Instruments