Send Email
Send SMS
Search
Nunes Instruments
Nunes Instruments

Home » Products »


Footware Equipments

We are a leading Manufacturer of belt flex tester, bennewart flex tester, sole adhesion tester, toe cap impact tester, aggregate crushing value apparatus and biogas flow meter from Coimbatore, India.

Belt Flex Tester

REQUEST CALLBACK

Belt Flex Tester
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 18,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Motor1/4 HP single-phase
Maximum eccentricity80 mm
Voltage230 V AC
Flexing frequency140 + 10 cycles/minute
CounterDigital electronic counter
BrandV-TECH
UsageLaboratory
ModelVT-CSTR2005
Usage/ApplicationIndustrial

 

Outsoles of footwear or other flexing components may suffer cracking in use due to flexing. Cracks usually develop at points of high surface strain resulting from the design of the sole pattern, without there being any cuts to initiates them. The Belt Flex Tester is designed to flex complete sales with their patterns intact in a manner similar to those encountered in actual use. Tests carried out using it provide a guide to the risk of such cracks developing during use. The test specimens are attached to the outside of a continuous belt, which is driven around two rollers. The large roller drives the belt while movement of the smaller roller is chosen to make the flexing somewhat more severe than is actual use. This form of flexing also closely simulates the actual bending at each step as it produces a short period of rapid flexing followed by a longer period when the specimen is not being flexed. A normal test consist of a number of flexing runs up to a total of 50,000 flexes, with an examination for cracking at the end of each run. The Belt Flex Tester consists of two roller on which a flat belt moves. The larger roller which is the driving roller rotates at a specified speed to give the specified frequency of flexing with the help of an electric motor and V-belt arrangement. The second roller, which is the flexing roller, rotates with the movement of the belt.The flexing rollers are slightly barrel-shaped so as to minimize sideways movement of the belt. A hand wheel is attached to the front end of these rollers to enable the belt to be moved by hand. The equipment is supplied with three flexing rollers, one for normal sales, the second for very flexible soles, and the third for very rigid soles.

The distance between the driving and the flexing rollers can adjust with the help of a screw arrangement to enable the belt to be mounted over different flexing rollers and to allow for small differences in belt length. This is done by turning a hand wheel on the side of the tester.The tester is fitted with an acrylic front cover and a wire mesh safety guard, which allows adequate circulation of cooling air around the test specimens during the test. For the safety of the user, the motor can be started only when the cover is closed.

Technical Specification:

Flexing frequency: 140 + 10 cycles/minute

Maximum eccentricity: 80 mm

Motor: 1/4 HP single-phase

Voltage: 230 V AC

Counter: Digital electronic counter

 

 



Additional Information:

  • Delivery Time: 1-2 week
Yes! I am Interested

Bennewart Flex Tester

REQUEST CALLBACK

Bennewart Flex Tester
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.39 Lakh / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Diameter of bending mandrel30 mm
Frequency of operation125 to 150 cycles/minute
Angle of flexing90C
Countersix digital types with memory backup
Brand/MakeVTech make
ColorMulti
Automation GradeAutomatic
Motor1/2 HP

 

Bennewart Flex Tester is intended to determine the resistance of a component of material to cut growth during repeated flexing. It can also be used to assess the effect of surface patterns on crack initiation and growth. This test is especially applicable to the outsoles of footwear, but may also be used with certain other flexible components. The Bennewart Flex Tester consists of a drive unit comprising an electric motor with pulleys and belts and link mechanism to give an oscillating movement to one of the two grips holding the two ends of the test specimen, the other grip being fixed.The oscillating grip has gun metal bushes, which slides on two hardened and ground bearing steel rods to give it a long working life. Each grip consists of swayable bases pivoted on ball bearings so that the two ends of the test specimen are free to align themselves with the natural contour of the specimen during flexing. The axis about which the grip bases oscillate life. A six digit pre-set electronic digital counter the numbers of test cycles and also stops the motor after pre-set numbers of test cycles. The apparatus is finished in gray hammer tone shaving, painting, and bright chrome/ zinc plating to give it a corrosion resistant finish. A cutting dies for the preparation of test specimen from the sheet and sitting punch with a jig for making initial crack are available as optional accessories

Technical Specification:

Number of specimen test: 2 for full sole, 6 for cut test specimen

Angle of flexing: 90°

Diameter of bending mandrel: 30 mm

Frequency of operation: 125 to 150 cycles/minute

Motor: 1/2 HP, single- phase 230V AC

Counter: six digital types with memory backup

 

 



Additional Information:

  • Delivery Time: 1-2 week
Yes! I am Interested

Sole Adhesion Tester

REQUEST CALLBACK

Sole Adhesion Tester
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 43,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Lever Ratio15
Length of Contact Arc22 mm
Curvatures of Toe Pieces25, 30, 35, 40 and 45 mm
Load Range0 to 125 kg X 500 gm
BrandVTech
Magnification Power2 AAA batteries
ApplicationIndustrial

Sole Adhesion Tester is used for the sole adhesion of the footwear. Digital model is also available. The system consists of a spring dynamometer to indicate the load applied at the junction of the sole and the upper, a lever arrangement to transmit the load exerted on the toe piece to the spring dynamometer, a straight edge fulcrum for resting the shoe on during the test, and a set of interchangeable toe pieces having different curvature. The spring dynamometer indicates the load applied on the joint directly in kilograms, taking into account the mechanical advantage of the lever transmitting the force from the toe piece to it. The load is indicated on a circular dial. The dynamometer has two pointers, a black powder to indicate the instantaneous load acting on the toe piece and a red dummy pointer to indicate the maximum load applied before failure of adhesion. The toe piece is five in number and having a different curvature to enable toes and heels of different shapes and sizes to be tested. The length of the arc of each toe piece, however, is the same to ensure that the load is applied only to a fixed length of joint. They are made from carbon steel for giving a long operational life. Any one of the toe pieces can be held in the equipment at one time. The fulcrum on which the shoe is placed during the test has an adjustable height to enable soles of different thickness to be tested. The height of the fulcrum is adjusted with the help of spacer strips provided with the instrument. The instrument is finished in painting and bright chrome plating to give it a corrosion resistant finish.

TECHNICAL SPECIFICATION

Load Range: 0 to 125 kg X 500 gm

Lever Ratio: 1:5

Curvatures of Toe Pieces: 25, 30, 35, 40 and 45 mm

Length of Contact Arc: 22 mm

 

 



    Additional Information:

    • Delivery Time: 1-2 week
    Yes! I am Interested

    Toe Cap Impact Tester

    REQUEST CALLBACK

    Toe Cap Impact Tester
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 32,500 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Item CodeVT-221-6
    FunctioningDigital
    Clamping Block150 x 150 x 19 mm,hardness at least 60 HRC
    Mass of Falling Block10.0 - 0.1 kg and 20.0 - 0.2 kg
    Height of fall1020 - 10 mm
    TypeTemperature Indicator
    I deal inNew Only
    Impact Energy100 - 2 Joule and 200 - 4 Joule

    Toe Cap Impact Tester is made on a horizontal platform which has two guide bars which guide the impact weight. There is a mild steel plunger of specified dimensions which is used the intermediate parts between the impact weight and the toe cap. The plunger is freely supported by the toe cap. The base of the machine is placed on the hard wood of specified dimensions. A capsule for measuring the clearance at the time of maximum depression is also supplied with the instrument. All the parts are either painted or chrome platted to give the instrument a corrosion free long life.

    TECHNICAL SPECIFICATION

    Mass of Falling Block: 10.0 - 0.1 kg and 20.0 - 0.2 kg

    Clamping Block: 150 x 150 x 19 mm, hardness at least 60 HRC

    Impact Energy: 100 - 2 Joule and 200 - 4 Joule

    Height of fall: 1020 - 10 mm

     

     



    Additional Information:

    • Delivery Time: 1-2 week
    Yes! I am Interested

    Aggregate Crushing Value Apparatus

    REQUEST CALLBACK

    Aggregate Crushing Value Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 9,500 / PieceGet Latest Price

    Product Details:
    ColourMulti

    As per IS: 383 This apparatus is used to measures resistance of an aggregate to crushing under a gradually applied compressive load. Specification: Consists of M.S.Cylindrical container 150 mm ±0.5mm dia x 130mm to 140mm high with base plate 200 to 230 mm./sqr x 6mm thick. A plinger of 148mm ± 0.5mm dia x 100 to 115mm high. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. And 1 no. Metal measure 115 ± 0.5mm dia x 180 0.5mm high.
    Yes! I am Interested

    Biogas Flow Meter

    REQUEST CALLBACK

    Biogas Flow Meter
    • Biogas Flow Meter
    • Biogas Flow Meter
    • Biogas Flow Meter
    • Biogas Flow Meter
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 26,500 / PieceGet Latest Price

    Product Details:
    Size(inches)11/2''
    Range (degree C)0 to 60 Degree C
    BrandV-Tech

    Thermal Mass Flow Meters make mass Flow Pune provide accurate mass flow measurement of natural gas, compressed air and other industrial gases. The proprietary sensor design measures mass flow directly and does not require additional pressure or temperature compensation to deliver accurate flow rate and total data.The Meter is available as an inline or an insertion style meter with/without a LCD Display.Natural Gas / Propane gas / LPG+ 1.0% of reading from 0 to 100 Kg/hr+ 2.0% of reading from 100 to 400 Kg/hr Compressed Air & other high velocity calibrations+ 1.0% of reading + 0.5% of scale over a 100:1 turn
    Yes! I am Interested

    Digital Plate Thickness Gauge

    REQUEST CALLBACK

    Digital Plate Thickness Gauge
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 19,500 / PieceGet Latest Price

    Product Details:
    DisplayLCD
    ConditionNew
    TypeDigital

    Digital Ultrasonic Plate Thickness Gauge:

    Civil Engineering:

    • Bridges
    • Communication Masts
    • Cranes
    • Highway Sign Gantries
    • Lighting Columns
    • Playground Equipment
    • Railway Infrastructure


    General Industry:

    • Boiler Tube Inspection
    • Condition Monitoring
    • Measuring Thickness of large geometrically
    • Pipe Wall Thickness Inspection
    • Plant Maintenance work
    • Safety Inspections.


    Hatch Cover Testing and Door Leak Detection

    • Test the weather/water tightness of cargo hatch covers or doors Test seals in cargo access areas,


    Non Destructive Ultrasonic Equipment for Hazardous Environments:

    • Chemical Plants
    • Dry, dusty environments where ignition could occur
    • Fuel Depots
    • Grain processing plants
    • Inside storage tanks
    • Oil and Gas production
    • Explosive atmospheres


    Industrial Leak Detection:

    • Compressed air or vacuum systems
    • verify steam-pipe seals, seal integrity or fittings and condenser drains, search for faults in electrical insulation
    • Motor and rail vehicles: test seals in cabins, doors, , check fuel injection in diesel engines Steam Traps,


    Offshore Platforms – Ultrasonic Test Equipment:

    • Decommissioning of oil platforms – thickness surveys
    • Oil drilling platform maintenance
    • Jetties and pontoon surveys


    Oil & Gas Ultrasonic Pipeline Thickness:

    • Oil & gas pipelines can suffer from internal corrosion leading to costly leaks and emergency repair work.


    Road Tankers:

    • Road Tankers are susceptible to corrosion from the inside
    • Rope Access Inspection Equipment
    • Bridges
    • Communication Masts
    • Cranes
    • Offshore Structures
    • Ships
    • Storage Tanks


    Shipping:

    • Regular ship maintenance is crucial for shipping companies as only with frequent safety checks,


    Storage Tanks - Corrosion Testing:

    • Fuel Depot Tanks
    • Domestic and Commercial LPG Tanks
    • Propane Gas Cylinders
    • Air Receiving Tanks
    • Air Cylinders for Divers
    • Water Storage Tanks
    • Effluent Tanks.


    Underwater Inspection:

    • Bridges
    • Caissons
    • Canal Locks
    • Hawser Sections and Shackles
    • Jetties and Pontoons.
    • Offshore rigs
    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Nunes Instruments
    Sebastian Nunes (Technical Director)
    No. 789/1109, Avinashi Road, Opposite Regional Passport Office , Gopalapuram,
    Coimbatore - 641018, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 97%
    Share Us :
    F G T L



    Home  |   Profile   |  Products  |  Site Map  |   Contact Us

    © Nunes Instruments. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Nunes Instruments