Colour & Luminance Analysers

• Temperature gradient corresponding 50°c/hr, 120°c/hr or free programmable
• Start temperature free programmable
• Displacement measuring by vibration free Digital dial gauges accuracy of ±0.01mm
• At the same time user conduct test of VSP or HDT
• Sample thickness 2-12 mm
• With high power cooling system. Re-cooling time from 200°c to ambient temperature in approx 30-45minutes
• With help of cooling facility user can start new test immediately
• Bath construction made by inside SS and outside MS with insulation

Additional Information:

• Minimum Order Quantity: 1 Piece

• This Instrument is in according to V-TECH BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification
• Machine maximum working temperature 800°c
• PID based temperature controller with auto-tune facility Temperature 
  resolution 1°c with accuracy better than ±5°c
• Furnace incorporated with heater, capacity 1kw
• Test structure with furnace and tubing fixed and clearly allocated

Additional Information:

• Minimum Order Quantity: 1 Piece

• Maximum pressure range 0-99.99bars.
• Fully Microprocessor based pressure controller to maintain the pressure with in 0.5% accuracy of full scale
• Fully hydraulic system with central pressurized water supply
• Reliable high-pressure water pump with operating pressure up to 100/200 bars
• User-friendly data logging software provided with machine to record data and able to get graph plotting as well as database on each stations separately
• Data record facility of all stations pressure as well as temp of one channel temperature controller
• Presentation of report in table format graphical forms
• Test can be conducted if power failure

Additional Information:

• Minimum Order Quantity: 1 Piece

We are engaged in offering Dissolved Oxygen Sensor that can measure dissolved oxygen in soil or water. These sensors are highly efficient owing to its large capacity electrolyte holder, positive fit and easy to replace membrane. Besides, these are integrated with dependable galvanic cell technology for long term deployment. These are ideal for aquaculture and wastewater monitoring applications and are also available with Teflon or High-Density Polyethylene (HDPE) membranes. Following are some of the specifications of these sensors:

Specifications:

• O2 Range : 0 - 20 mg/liter
• Temperature range : 0 - 50° C
• Pressure : 0 - 100 psig
• Calibration : Single point in Air
• Cell type : Galvanic
• Minimum flow rate : 2 inches (5 cm/second)
• Body Material : Delrin
• Output at saturation : (HDPE) Membrane 45 mV, ±9 mV; (Teflon) Membrane 33 mV, ±9 mV
• Accuracy : ± 2%
• Response time of equilibration : Within 2 mV of final reading, After 1 minute using HDPE, After 2 minutes using Teflon
• Average estimated life span electrolyte : 9 -12 months
• Dimensions : Diameter : 2.2 in. (5.59 cm); probe height: 3.5 in. (8.89 cm)
• Weight : 1.1 Ibs. (500 g)

We hold expertise in offering Barometric Pressure Sensor that can operate over a temperature range of -40 to + 60 ⁰C at low altitude and is housed in a weatherproof (IP65) casing. These are extensively used for low altitude ranging from 0-1500 m. Moreover, it is also available with indoor version and suitable for use in non-condensing environments.

We are one of the leading manufacturers, suppliers and exporters of Salt Spray Chambers that are in conformation with industry standards. Salt Spray Chambers are sturdily constructed in our facility using high grade raw materials that are well tested and verified on several quality parameters. Salt Spray Chambers are offered at very reasonable prices. Salt Spray Chambers are easy to install and offer cost effective solutions.

Available in Basic and Automatic models in various sizes of 120Ltr, 450Ltr, 1000Ltr, 1500Ltr and 2000Ltr.

Features:

• So2 dosing

• Dry off

• Cyclic corrosion

• Condensing humidity

• Dwell

• Controlled humidity

• Immersion

• Spray header

The Solar Radiation Sensor, or solar pyrometer, measures global radiation, the sum at the point of measurement of both the direct and diffuse components of solar radiance, the sensor's transducer, which converts incident radiation to electrical current, is a silicon photo diode with wide spectral response. From the sensor's output voltage, the console calculates and displays solar radiance. It also integrates the radiance values and displays total incident energy over a set period of time.

The outer shell shields the sensor body from thermal radiation and provides an airflow path for convection cooling of the body, minimizing heating of the sensor interior. It includes a cutoff ring for cosine response, a level indicator, and fins to aid in aligning the sensor with the sun's rays. The space between the shield and the body also provides a runoff path for water, greatly reducing the possibility of rain- or irrigation-water entrapment. The diffuser is welded to the body for a weather-tight seal; it provides an excellent cosine response. The transducer is an hermetically-sealed silicon photo diode; the included amplifier converts the transducer current into 0 to +2.5 VDC. Spring-loaded mounting screws, in conjunction with the level indicator, enable rapid and accurate leveling of the sensor. Each sensor is calibrated against a secondary standard which is calibrated periodically against an Copley Precision Spectral Pyrometer in natural daylight

Specifications:

General:

• Operating Temperature: -40° to +150° F (-40° to +65° C)

• Storage Temperature: -50° to +158° F (-45° to +70° C)

• Transducer: Silicon photo diode

• Spectral Response (10% points): 400 to 1100 nanometers Cosine Response

• Percent of Reading: ±3% (0° to ±70° incident angle), ±10% (±70° to ±85° incident angle)

• Percent of Full Scale: ±2% (0° to ±90°)

• Supplied Cable Length: 3' (0.9 m)

• Cable Type: 4-conductor, 26 AWG

I/O Specifications:

• Green wire: Output (0 to +3VDC); 1.67 mV per W/m²

• Red & Black wires: Ground

• Yellow wire: +3 VDC ±10%; 1 mA (typical)

• Temperature Coefficient: +0.067% per °F (+ 0.12% per °C)

• Reference temperature: 77° F (25° C)

• Correction per degree above reference temp: -0.067% of reading per °F (-0.12% per °C) Correction per degree below reference temp: 067% of reading per °F (+0.12% per °C)

• Housing Material: UV-resistant PVC plastic

• Dimensions (Length x Width x Height): 2.00" x 2.75" x 2.25" (51 mm x 70 mm x 57 mm)

• Weight: 0.5 lbs. (226 g)

Sensor Output:

• Resolution and Units: 1 W/m²

• Range: 0 to 1800 W/m²

• Accuracy: ±5% of full scale (Reference: Ripley PSP at 1000 W/m²)

• Drift: up to ±2% per year

• Update Interval: 50 seconds to 1 minute (5 minutes when dark)