Laboratory Instruments

We are reliable distributor engaged in offering patrons Digital Viscometer of excellent quality. These meters are widely used in sugar and paper industries. We procure these meters from well-established manufacturers who fabricate these meters under the guidance of skilled professionals having deep and thorough knowledge of the subject. These meters are highly reliable in performance and thus are widely demanded countrywide. Customers can avail these meters from us in bulk quantities ensuring excellent quality in each product.

Features:

• Easy to use

• Accurate results

• Low maintenance

• Reliable

• Smart-functions

Digital Viscometer Include:

• Instrument 6 spindles (RV/HA/HB) or 4 spindles (LV)
• Spindle Guard Leg ^*Lab Stand (Model A)
• Carrying Case ^**Not applicable to HA or HB versions

Optional Accessories:

• Viscosity Standards, RV/HA/HB-1 Spindle, Quick Action Lab Stand
• Temperature Bath, Small Sample Adapter, UL Adapter
• Thermosel, Spiral Adapter, DIN Adapter
• Quick Connect/Extension Links, Vane spindles

Applications:

• Consider application and viscosity range when selecting model (LV, RV, HA, HB)

LV Series – Low Viscosity:

• Adhesives (solvent base) Biological Fluids Chemicals
• Dairy Products Inks Juices Oils / Solvents
• Pharmaceuticals Polymer Solutions

• Adhesives (hot melt), Asphalt (SHRP), Ceramic Slurries
• Food Products, Gums, Ointments/Creams, Paints/Inks/Coatings
• Paper Pulp, Shampoos/Lotions

• Caulking Compounds/Putty, Chocolate, Epoxies, Inks (ballpoint, offset, lithographic), Pastes, Peanut Butter, Roofing Compounds, Sealants, Tars

DV-E Viscometer:

• 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles
• Minimum viscosity is achieved with optional RV/HA/HB-1 spindle
• M = 1 million cP = Centipoise mPa•s = Milli-pascal/second

• It is available as the meter only
• In a kit containing all that you need to start measuring dissolved oxygen including the reagents and attach case

Carving a special niche for ourselves in the market, we are involved in providing a wide range of Portable Dissolved Oxygen Meter. Offered product is qualitative and acclaimed by the clients for its high operational accuracy. Moreover, client can get this product at reasonable price range.

Specifications:

• Calibration: Manual on 2 Points (Zero and Slope)

• 3½ LCD Display with Symbol

• Probe: MA840 (Included)

• Range: 0.0~19.9 mg/l

• Resolution: 0.1 mg/L

• Accuracy: +1.5% Full Scale

• Temperature compensation: Automatic from 0~30º C

• TDS -1 Range 0 - 1999 ppm/ Reso- 1 ppm
• TDS -2 Ranges 0 - 10 ppt (1 ppt = 1000 ppm)/Reso - 0.01 ppt
• COND- 3 Range - 0 - 2000 us / Reso- 1 us
• COND- 4 Range - 0 - 20 ms (1 ms = 1000 us)/Reso-0.01 ms
• Accuracy - +/- 2 Digits
• Power - 4 x 1.5 v Button Battery
• Life - Approx 200 Hr (Battery)
• Weight - 75 G

Additional Information:

• Minimum Order Quantity: 1 Piece

We are suppliers of Mastic Hardness Tester For Bitumen For determining the hardness number of Mastic Asphalt for flooring. It consist of an internally insulated cabinet to the base of which is fitted a water bath having two taps. The bath is heated by an immersion heater and the temperature is controlled with the thermostat at 35° +/- 0.5° C. A 6.5mm dia pin is loaded on the specimen by means of a lever to give a 31.7 Kg weight. A dial gauge

Specifications: 

• 0.01 x 25 mm is provided to record the penetration of pin into the specimen.
• Application - For determining the hardness number of Mastic Asphalt for flooring 
• thermostat at -  35° +/- 0.5° C. A 6.5mm 

Additional Information:

• Minimum Order Quantity: 1 Piece

Additional Information:

• Item Code: HI-83214
• Minimum Order Quantity: 1 Piece

• RTD Temperature Probe NEW Ball Bearing Suspension (RV/HA/HB)
• Viscosity Standards RV/HA/HB-1
• Spindle Quick Action Lab Stand Temperature Bath Small Sample Adapter UL Adapter
• Thermoseal Helipath Stand with T-bar Spindles Spiral Adapter
• DIN Adapter Quick Connect/Extension Links Vane Spindles

• Consider application and viscosity range when selecting model (LV, RV, HA, HB)

• Adhesives (solvent base)
• Biological Fluids
• Chemicals
• Dairy Products
• Inks
• Juices
• Oils/Solvents
• Pharmaceuticals
• Polymer Solutions

• Adhesives (hot melt)
• Asphalt (SHRP)
•  Ceramic Slurries
• Food Products
• Gums
• Ointments/Creams
• Paints/Inks/Coatings
• Paper Pulp
• Shampoos/Lotions

• Caulking Compounds / Putty
• Chocolate
• Epoxies
• Inks (ballpoint, offset, lithographic)
• Pastes
• Peanut Butter
• Roofing Compounds
• Sealants
• Tars

• Hanna 4-ring potentiometric probe is virtually immune to contamination by unclean solutions. This allows the transmitter to operate at peak performance at all times.
• Temperature effects are compensated for by the built-in temperature sensor on the probe and transmitter's ATC circuitry with a ß of 2%/°C.
• Direct connection of the probe to the transmitter assures a positive electrical connection with no signal loss over long distances.
• Two versions are available, HI 8936 without an LCD, and the LCD version, HI 8936L. HI 8936L allows easy verification and monitoring of measured values, and is easier to calibrate and maintain.
• The series should be used in conjunction with the HI 7635 in-line probe or HI 7638 platinum probe (see Process Electrodes and Probes). The  series requires external power to the 4-20 mA current loop.
• All model are supplied with instructions.**Add "L" to end of Product Code for model with LCD

Additional Information:

• Item Code: HI-8936

Additional Information:

• Minimum Order Quantity: 1 Piece

Fatty Acid Tester we manufacture holds a huge demand in Global market. Sample free fatty acids in the edible oil is nothing but the acidity of the oil (pH of the oil). Free fatty acid having free H+ ion is responsible for shifting the pH value in the lower side. This pH of the edible oil is treated by pH indicator; the color shift is measured by spectrophotometer. The absorption of the light is proportional to the concentration of the free fatty acid in the edible oil. , It is possible to carry out a test using micro-quantities of sample and can be applied even to fat substances that have a difficult extraction process.

Salient Features

Additional Information:

• Item Code: HI-713
• Minimum Order Quantity: 1 Piece

• Model A – Range 0 – 32 %
• Model B – Range 28 – 62 %
• Model C – Range 58 – 92 %
• Model Range 0 – 10 %
• Model Range 0 – 18 %
• Model Range 0 – 55 %
• Hand Refrectometer for Urine, Serum & Protein
• Erma Japan Make – Model D
• Hand Salinity Refrectometer, ERMA, Japan 0 - 100 %
• Hand Salinity Refrectometer, ERMA, Japan 0 – 28 %

Additional Information:

• Minimum Order Quantity: 1 Piece

Salient Features

Additional Information:

• Item Code: DL-6054
• Minimum Order Quantity: 1 Piece

Additional Information:

• Minimum Order Quantity: 1 Piece

Salient Features

Additional Information:

• Minimum Order Quantity: 1 Piece

Concrete Moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a Vibrating Machine. Vibrating Machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.

Specifications:

• The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base.
• The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould.
• This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame.
• A balance weight is an integral bottom part of the frame.
• The centre of gravity of the assembly is brought to the centre of the eccentric shaft or within a distance of 25mm below it.
• The electric motor drives the shaft of the frame and thus imparts required vibrations to the mould.
• The frequency of vibration is 12000 ± 400 vibration per minute.
• Supplied complete with a 7.06cm cube mould and loose base plate, a time switch 0-5mins x 1 min and certificate of vibration.

Additional Information:

• Minimum Order Quantity: 1 Piece

Salient  Features

Additional Information:

• Minimum Order Quantity: 1 Piece

Nitrogen Gas Generator Nitrogen Gas & Air Generator

• High Purity Nitrogen / Nitrogen & Air Generator
• Light weight and easy to operate
• Extract from the air by electrochemical separation
• Flow is visualized by digital display
• The electrolysis separation pool is made of S.S
• Low temp. of electrolysis pool.
• Equipped to prevent the returning of the liquid.
• Over voltage & over current protection

Additional Information:

• Item Code: HPFM
• Minimum Order Quantity: 1 Piece

• Simultaneous display of pH and ORP
• Simultaneous control of two pumps/valves

• PH Range:  0.00 - 14.00 pH
• PH Resolution: 0.01 pH
• PH Control: Adjustable set point in range 5.20 - 10.00 pH
• PH 115 V AC outlet: Powered when actual PH reading Is ABOVE the Set Point
• ORP Range: +/- 1999 mV ORP
• ORP Resolution: +/-1 mV ORP
• ORP Control: Adjustable set point in range 200 - 600 mV (can be Modified)
• ORP 115 V AC outlet: Powered when actual ORP
• Reading is BELOW the Set Point
• Display: PH LCD/H=1/2" (12.5 mm), ORP LCD/H=3/8" (7.7 mm)
• Dimensions:  6.2 x 6.7 x 2.2" (W x H x D)
• Weight: 1.7 Lbs./0.8 kg
• Power Consumption: 115 V AC/60 Hz/0.25 Amp
• PH and ORP outlets: 115 V AC/60 Hz/Maximum 5 Amp. Per outlet
• 115/220 V AC (Internally selectable)
• Heavy Duty 10 Amp at 115 V AC Relays

• Checker B is supplied with, batteries and instructions
• Please note you will need to purchase an electrode separately

• Simultaneous display of PH and ORP
• Simultaneous control of two pumps/valves
• 115/220 V AC (Internally selectable)
• Heavy Duty 10 Amp at 115 V AC Relays

Specifications:

• It  is supplied with glass cuvets, Zero and 10 FTU calibration solutions, 12 VDC adapter and instructions

Rebound Hammer is a device for measuring elastic properties/strength of concrete/rock and helps in testing mainly surface hardness and penetration resistance properties.

Specification:

· Usage: Concrete Rebound Hammer

· Testing instrument: Concrete Rebound Hammer

· Color : Customized

Features:

Additional Information:

• Minimum Order Quantity: 1 Piece

• Supplied with battery and instruction manual.

Additional Information:

• Item Code: HI-96822

• Type - Torsion Testing Machine
• Applications - Torque measurement is by Pendulam Dynameter System 
•  geared motor through gearbox. 

Additional Information:

• Minimum Order Quantity: 1 Piece

'V-TECH' Make Tubular Impact Tester allows both the failure point to be measured. It can be used with paints, Varnishes, plastic coating, laminations and sheet material. A sample clamp securely hold the test piece, Impact can be varied by adjusting weights or heights.

Specifications:

• Aluminum Tube marked in inches or centimeters
• Standard tube lengths are 25" and 40"
• Different weight 2 LB, 4 LB, 6 LB.
• Type - Tubular Impact Tester

Additional Information:

• Minimum Order Quantity: 1 Piece

• Type -  Violet Cabinet
• Model - VT-2 
• Applications - Used for paper chromatography analysis 

Additional Information:

• Item Code: HI-981406
• Minimum Order Quantity: 1 Piece

Salient Features

Specification

Additional Information:

• Minimum Order Quantity: 1 Piece

• pH controller and dosing pumps in one compact unit
• ±0.01 pH accuracy with unbeatable performance
• Isolated 4 to 20 mA recorder output
• Proportional dosing slows the pump down when the measured pH level approaches the set valve which ensures precise dosage and avoids costly waste of chemicals due to over dosage
• Alarm contact is activated whenever the pH value varies more than 2 pH units from the set point
• Auxiliary contacts allow the user to attach a mixer or priming pump that is activated only when the pump is dosing
• High Quality materials are used for all parts that come into contact with liquid

• The  water-resistant pH Transmitters with 4-20 mA is designed with a high-impedance input to accept signals directly
• from a pH electrode. The signal is then processed by a special high-impedance amplifier, which transmits an output current directly proportional to the input signal but independent of changes in load or cable capacitance. Calibration is performed by adjustment of two independent trimmers for slope and offset.
• Temperature compensation is performed by the transmitter's ATC circuitry when measurements are taken with a temperature probe attached, it is also possible to substitute a fixed resistor for the temperature probe, if ATC is not required. The transmitter can be connected to Hanna controller  recorders, computers or any data monitoring device that accepts 4 to 20 mA input.
• Four versions are available. The standard models  with an LCD, which allows easy verification and monitoring of measured values, and is easier to calibrate and maintain.
• It  is supplied with instructions.(**Add L to end of Product Code for model with LCD)

Additional Information:

• Item Code: HI-8614