Agricultural Instruments

Approx. Rs 75,000 / PieceGet Latest Price

• The seed counter have microcomputer automatic control
• Have touch-key, complete automatic operation
• Count seeds fast
• Microcomputer automatic control, have touch-key, complete automated operation
• LED shows the hypothesis number and the actual number
• Count speed can change, no noise, the precision is higher

Approx. Rs 1.99 Lakh / PieceGet Latest Price

The Chlorophyll Meter that we provide to our clients is used to check the development and health of a range of agricultural products that comprise rice, wheat, cotton, and corn. Apart from that, these decide the quantity of nitrogen fertilizer that should be provided to the plants, which leads to greater yields of qualitative plants.

Special Features:

• Advantage: We're sole agent of SPAD502 Plus in China
• Chlorophyll Meter, Non-destructive measurement of plant
• Water-resistant, Trend graph display

Applications:

• Measures leaf chlorophyll, an important indicator of plant health.
• This performs quick measurements
• Non-destructive measurement of plant chlorophyll
• Enables quick, easy measurement of the chlorophyll content of plant leaves without damaging the leaf
• Quick, easy measurement of chlorophyll levels in plant leaves without damaging the leaf.
• Measurements are taken by just closing the measuring head on the leaf.
• Since the leaf is not cut off or damaged in any other way, the same leaf can be measured as the plant grows
• Trend graph display. Up to 30 measurements can be stored in memory and displayed on a trend graph so that changes in measurements over time can be seen and abnormal values can be noticed at a glance
• Water-resistant.
• This is water-resistant (IPX-4) so it can be used outdoors even in the rain
• It is not miscible, and should not be washed with water
• Compact and lightweight for portability.
• This is small enough to fit in a pocket and weighs only 200 g, so it can be taken anywhere
• Low power consumption.
• It uses LED light sources, resulting in extremely low power consumption, with approximately 20,000 measurements from one set of fresh alkaline-manganese batteries
• Monitoring of growth and health of plants

Approx. Rs 97,000 / PieceGet Latest Price

Owing to our experience and expertise in the industry, we are able to offer compact Portable Leaf Area Meter. This meter is used for accurate and non-destructive measurement of leaf area and associated parameters. It is provided with high-resolution scanner and scan-board with integral data analysis and image storage.

Features:

• Provided with a multi-position for carrying and handling increased portability and ease of use
• Measurement of leaves can be effectively carried out on the scan-board or an independent plain surface
• It's large and high contrast liquid crystal display enables visual confirmation of scanned leaf area together with the measured leaf parameters
• It operates by menu-driven software and measurements are efficiently displayed in mm, cm or inches
• An adjustable contrast control makes the suit damage, discolor or diseased leaf applications
• The stored image can be downloaded, in BMP or TIFF formats, into commercially available image analysis software

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Customers can avail from us Leaf Porometer that measures the diffusion conductance by making a comparison between the rates of humidification within small corvette readings that are achieved by a calibration plate. This product is appreciated in the market for its precise accuracy in the derived valued.

Features:

• Direct readout of conductance or resistance
• Simple absolute calibration in the field
• Minimizes leaf stress during measurement
• Award-winning user interface

Data handling:

• Reading memory: Up to 1,500 readings with full annotation
• Data interface: RS-232 serial, up to 9,600 baud, supplied with connector and adapter for direct connection to IBM PC compatible computers
• Software: For IBM PC’s, saves data to a comma-separated ASCII data file (.CSV)

Approx. Rs 1.45 Lakh / PieceGet Latest Price

Order Information:

• NUNES-01 (115 V) and NUNES-02 (230 V) is supplied with sample corvettes and caps (4 ea.), sample preparation kit, cloth for wiping corvettes (1), scissors, AC/DC power adapter and instruction manual.
• NUNES-100 kit includes 10 mL corvettes with caps (4 ea.), 100 mL plastic beaker, 170 mL plastic beaker, 100 mL graduated cylinder, 60 mL syringe with screw rim, 5 mL syringe, funnel, filter discs (25), spoon, pipettes (2), carbon powder packets (50), and de mineralizer bottle with filter cap for approximately 12 liters of deionized water.

Nutrient Analysis Photometer for Greenhouses and Hydroponics :

• Light blocking corvette holder
• Backlit LCD
• BEPS (Battery Error Prevention System) Alerts users in the event a low battery could affect readings
• PC compatible via USB
• Powered by rechargeable batteries or 12 VDC
• Save and recall logged data at the touch of a button.
• On-screen tutorial; with the tutorial function enabled, short guides relating to the current operation are displayed.
• HELP button; screen-specific help can view at the touch of a button.
• Method selection; users can easily select parameters via the Method button.
• Setup button: instrument preferences such as backlight intensity and screen contrast can be changed via the setup button

Approx. Rs 1.87 Lakh / PieceGet Latest Price

We offer Portable Plant Nutrition Analyzer, which is of premium quality. Developed using the latest technology and high-grade machinery, these device is in conformation with international standards. Use near-infrared spectroscopy, this device can conduct non-destructive analysis on three important parameters at the same time- chlorophyll, nitrogen and moisture content. It can also test plant nutrition and provide growth physiology information. Owing to their accurate functions, easy usage, and durability, our product is very popular in the market.

Features:

• Provide easy to draw plant nutrient, moisture and so on information graph necessary for plant precision irrigation and fertilization
• Nondestructive test plant quickly, not to affect plant growth
• s rapid determination: Test plant chlorophyll, nitrogen, and moisture at the same time
• Test point location information: Receive by inner GPS module, NAME-83 license agreement and Serial Port Break; the received data decode longitude, latitude, speed, time, (clock and calendar, year, month, day, hour, minute and second) and so on and store this information; time can also be set manually
• Have Automatic and Manual measurement pattern
• View past stored data, show three parameters at the same time
• The computer can transfer wired or wireless data so as to manage and analyze
• Show Clear and accurate; have back-light function
• Easy to store data, directly show stored data
• Consumes less power

Applications:

• Farmland
• Forest
• Road greening
• Grassland

Approx. Rs 35,500 / PieceGet Latest Price

We offer our clients with Soil Compaction Meter that is used to check the hardness of soil. This device prevents soil compactness, which is a serious problem that occurs in soil, making the growth of root and plant difficult. The Soil Compaction Meter that we offer prevents the moisture content permeating and reduces the use of chemical fertilizers.

Available Models:

• TJSD-750: General. stored datum on Soil Compaction Meter
• TJSD-750-II: Add GPS action and can link to computer by software, can store datum on computer and print.

Additional Information:

• Item Code: TJSD

Approx. Rs 22,500 / PieceGet Latest Price

Aiming at highest level of customer-satisfaction, we are offering them a wide range of Digital Soil Hardness Meter. We collect this product from the leading vendors’ so as to ensure its quality as per the international standards. Offered product is available in the market with below details:

Features:

• Digital Soil Hardness Meter is connected to computer
• The computer will synchronous display curve and records
• Set Automatic On/Off
• Battery capacity:The capacity on the meter is divided into three parts.When the power is low ,the meter will automatic off

Additional Information:

• Item Code: TYD-2

Approx. Rs 1.89 Lakh / PieceGet Latest Price

We offer our clients with an ISO 9001 certified quality of Soil Nutrient Tester, Test N P K that is renowned in the market for its optimum quality. This device rapidly tests the N, P, K, organic matter, humic acid, salinity, and PH in the soil, fertilizer or plants. This product is offered free for the first time.

The details of this product are:

• Power Electronic: Usage auto testing machine
• Certificate: ISO9001 quality certificate

The characteristics of these products are as follows:

• Quickly test the N, P, K, humic acid , organic matter, salinity, and PH in the soil, fertilizer and plant
• Can store and print data
• With the function of time display, can automatically record and save the time of test sample
• Store about 1000 groups datum (time, place, fertilizers), datum can be checked at any time
• Print like the test date, number, items, sample contents, variety and so on
• Chinese big-screen LCD shows, and will guide you how to operate
• When in the test, it has the functions of playback, so it is very convenient and reasonable
• Armor plate shell, firm, beautiful and durable
• According to the local situation, you can set the variety, productivity, kind of fertilizer and will automatically calculate the fertilizing amount (TPY-6A)

Specifications:

• Stability: A(absorbency of illumination) drift < 0.003 in three minutes.
• Repetitiveness: A(absorbency of illumination) <="" p="">
• Linearity errors: <3.0 %
• Sensitivity: Red light ≥4.5 ×10-5 & Blue light ≥3.17×10-3
• Wavelength range: red light 620 ±4nm / Blue light 440 ±4nm / Green light 520 ±4nm
• Shake resistance: qualified

• Range: 1-14
• Error: ±0.1

• Range: 0.01% -1.00%
• Error: ±5%

• Alternating current (AC): 80V- 240V,50Hz,2) Direct current: 18V,5W (With tester)

Additional Information:

• Item Code: TPY-6A

Approx. Rs 32,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 10,950 / PieceGet Latest Price

We specialize in supplying a comprehensive collection of Soil Tensiometer. This device is widely used in the agriculture industry for testing moisture content in the soil for its maintenance. We fabricate this product using optimum quality raw components procured from reliable sources.

• The Tensiometer can test soil maintenance moisture content
• Tensiometer measures the force with which water is held in the soil by the soil particles
• This force, referred to as soil suction, tension, or potential, indicates how tightly the water is bound in the soil, and how much energy must be exerted by plant roots to remove and use the water
• The basic components of a potentiometer include a porous ceramic cup, a plastic body tube, and a vacuum gauge
• The ceramic cup is placed in good hydraulic contact with the soil and allows transfer of water into and out of the Tensiometer body according to the tension in the soil
• The vacuum inside the Tensiometer body equilibrates with the soil water tension, and the dial gauge provides a direct readout of the tension

Specifications:

• Model: TEN-15 Length: 15 cm
• Model: TEN-30 Length: 30 cm
• Model: TEN-40 Length: 40 cm
• Model: TEN-50 Length: 50 cm
• Model: TEN-60 Length: 60 cm
• Length: 15-120 cm (custom made for each individual customer)
• 0-10 Kpa: Represent humidity, high humidity for most crop
• 10-30 Kpa: Represent moist, be adaptable to the growth of crops
• 30-50 Kpa: Represent dry, need water for some hydrophilic plant
• 50 Kpa: Represent very dry, need water for most crops

Approx. Rs 62,500 / PieceGet Latest Price

VT-860 Automatic Titrator is a Top Lab Automatic titration device with high analysis accuracy under the principle of potentiometric titration. It enjoys modular design, consist of three parts: volume titration device, control device and measuring device. The titration methods include macro titration, microtitration, volume setting titration, EP, etc. It has pre-titration, preselected endpoint titration, blank titration and manual titration modes. Sensors/Electrodes can choose to conduct acid-base titration, redox titration, precipitation Titration, complexometry titration, non-aqueous titration and pH value measurement.

Approx. Rs 56,250 / PieceGet Latest Price

Product Details:

Belt Material :PVC, PU, Neoprene, Polyester, or as specified

Voltaz: Text

Type: Slat Conveyor

Operating Speed: 0-1 m/s, 1-2 m/s, 2-3 m/s, 3-4 m/s, >4 m/s

Material :Stainless Steel, Rubber, or any specified material

Length :10-20 feet, 20-40 feet, 40-60 feet, 60-100 feet, upto 500 meter

Design Type :U trough design

Condition :New

Capacity :1-50 kg per feet, 50-100 kg per feet, 100-150 kg

per feet, 150-200 kg per feet, 200-300 kg per

feet, upto 3000 ton per hour

Brand :V-Tech

Belt Width :0-10 inch, 10-20 inch, 20-30 inch, 30-40 inch,

>40 inch, more than 2m wide

We manufacture premium quality of Belt Conveyor which are effective in transporting a variety of products within plants and project sites. The Belt Conveyors are made of superior grade materials which are rugged and sturdy. Our Belt Conveyors can be designed in a variety of belt widths and lengths according to the specific need applications.

Approx. Rs 19,500 / PieceGet Latest Price

• 3-in-1 combination probe with pH, EC/TDS, and temperature sensors
• CaAL Check feature to easily check the probe calibration status at any time.
• Best for hydroponics, greenhouses, farming and ground water applications.                        

The VT833 portable meter features a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The VT833 is a simplistic pH/EC/TDS meter that is calibrated manually to a single point with the use of two trimmers. pH is calibrated to pH 7.01 while EC/TDS is calibrated to either 1.41 mS/cm (1413 µS/cm) or 1500 ppm. The LCD screen has battery life indicator as well as on-screen tutorial messages.

The supplied VT833 probe is a polypropylene body, amplified pH electrode with a built-in EC/TDS and temperature sensors. The amplifier for the pH electrode prevents interference from humidity and electrical noise from common sources including from motors, ballasts or pumps. The VT833 is a versatile meter best suited for agricultural, greenhouse and hydroponic applications.

The VT833 is supplied with a polypropylene body pH/EC/TDS/temperature probe. The pH portion of this probe is constructed with a cloth junction, maintenance-free polymer gel electrolyte, and a low-temperature glass sensing bulb. The EC/TDS portion of this probe utilizes two stainless steel pins for an amperometric determination of conductivity and total dissolved solids. A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples.

• Pre-Amplified pH Electrode: The pH electrode circuit has a built-in amplifier that serves to reduce the effects of electrical noise on the high impedance pH measurement. Electrical noise can come from motors and pumps that are common in greenhouses. The single reference junction design of the pH electrode has a cloth junction that allows ion movement between the inner gel electrolyte and the sample being measured. The advantage of the cloth junction is that it can be extracted from the probe, exposing a fresh surface when readings become drifty or erratic. These features make this probe ideal for use in fertilizer solutions.

• Amperometric EC/TDS Sensor: EC/TDS readings are performed by a two-pin amperometric sensor. An alternating voltage is applied to the sensor and the amount of current that passes between the two stainless steel pins determines the amount of dissolved ionic solids present.

• Polypropylene Body: The polypropylene body of the VT833 houses all three sensors within a sturdy, single body design. This body material is suitable for a wide range of applications and excels in measurements with portable meters due to its durability.

Approx. Rs 2.05 Lakh / PieceGet Latest Price

FEATURES

* Designed to check the moisture level of soil or other similar material.

* Measurement range : 0 % to 50 % moisture content of soil sample with 0.1 % resolution.

* All in one digital soil meter, easy to make operation.

* Data hold function to freeze the desired value on display.

* Microprocessor circuit ensures high accuracy and provides special functions and features.

* Operates from DC 1.5V ( UM4/AAA ) x 4 PCs batteries.

* Built-in low battery indicator.

* Durable, long-lasting components, enclosed in strong, compact ABS-plastic housing.

Specification

Measuring Used the 2 pins electrode to measure the conductive

Principal ability of the species, then converter to the reading of

" % " Moisture content " of soil sample.

Display LCD size : 28 mm x 19 mm.

Measurement Range 0 % to 50 % moisture content on soil.

Resolution 0.1 %.

Accuracy + ( 5 % + 5 d ) F.S.

@ 23+= 5\ moC, F.S. : full scale.

Circuit Custom one-chip of microprocessor LSI circuit.

Probe 2 pins moisture electrode.

Data Hold Freeze the display reading.

Sampling Time Approx. 0.8 second.

Operating Temp. 0 to 50 oC.

Operating Humidity Less than 80% R.H.

Power Supply DC 1.5 V battery ( UM4/AAA ) x 4 PCs,

Power Current Approx. DC 12 mA

Weight 267 g/ 0.58 LB. @ Battery is included.

Dimension Meter body : 172 x 40 x 40 mm ( 6.8" x 1.6" x 1.6" ).

Probe body : 220 mm x Dia. 10 mm ( 8.7" x Dia. 0.4" ).

Total length ( meter + probe ) : 392 mm ( 15.4 " ).)

Moisture Meters can be used for wood, Concrete, grain and various other materials and is read in %.

Moisture meters are great to measure the moisture content in bulk solids, liquids and some gases. Some devices use infrared (IR), radio frequency (RF), or microwave techniques to evaporate water from a sample. Others determine moisture content by measuring a material’s conductance, resistance, or capacitance and calculating a corresponding moisture value. Variables measured include relative humidity, absolute humidity, specific humidity, and dew point. Relative humidity is a measure of the amount of water in the air compared with the amount of water the air can hold at a measured temperature. By contrast, absolute humidity is the mass of water vapor in a given volume of air. Specific humidity is the absolute humidity divided by the total mass of the given volume of air. Dew point is a measure of the temperature to which air needs to be cooled in order for saturation to occur. Moisture meters that measure pressure and temperature are commonly available. These specialized devices often include special circuitry or additional probes.

There are several form factors for moisture meters. Many require a secondary device or instrument for data acquisition or the transmission of humidity information. Integrated circuit (IC) chips mount on printed circuit boards (PCB). Benchtop or floor-standing moisture meters include a full casing or cabinet and an integral interface. Handheld units include an integral probe and are designed to be operated while held in one hand. Gauges mount on walls, well, racks, or DIN rails and include an integral display. Both analog and digital devices are available; however, simple light emitting diode (LED) power indicators are not considered to be a display. Video display terminal (VDT) styles include cathode ray tube (CRT) monitors and flat panel display (FPD). Mounted transmitters do not include a display, but provide an integral sensor or probe. Analog current outputs include variable levels such as 0 – 20 mA or 4 – 2 mA. Common analog voltage outputs are 0 – 10 V and ±5 V.

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 9,500 / PieceGet Latest Price

SOIL TEST KIT

Soil testing is the analysis of a soil sample to determine nutrient and contaminated content, composition, and other major nutrient characteristics. A soil test can determine fertility, or the expected growth potential of the soil which indicates nutrient deficiencies, potential toxicities from excessive fertility and inhibitions from the presence of non-essential trace minerals.

Soil testing is often performed targeting groups of compounds and minerals which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop. The advantages of testing are that excessive use of fertilizer can be avoided which results in reduction of Waste of plant & potential damage to environment can be controlled. Therefore it makes good sense to test the soil for these nutrients and add the required amount of fertilizer.

Soil has to contain some major nutrient for the crops to be healthy. The major nutrients which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop are:

NITROGEN

Nitrogen encourages above ground vegetative growth & it serves as the source for the dark green color in the leaves of various crops.

PHOSPHOROUS

Phosphorus is a component of the complex nucleic acid structure of plants, which regulates protein synthesis. It is therefore, important in cell division and development of new tissue in roots.

POTASSIUM

Potassium takes care of multiple functions like Photosynthesis, Protein Synthesis, and Starch formation and for the translocation of Sugars. It also imparts resistance to the plant against Microbial attack and if deficient results in poor flowering and fruit formation.

pH

pH is important because it influences how easily plants can take up nutrients from the soil. Also is useful in prevention of soil borne disease.

ORGANIC CARBON

Carbon content of soil is a major factor in its overall health. Soil carbon improves the physical properties of soil and water-holding capacity of sandy soil. Also it contributes to the structural stability of clay soils by helping to bind particles into aggregates of which carbon is a major part, holds a great proportion of nutrients that are of importance to plant growth. It prevents nutrient leaching, and is integral to the organic acids that make minerals available to plants.

Parameter Range

pH 4—10

Nitrogen 0 -5, 10-20, 20 -30,>40 Kg/Acre as N

Phosphorous 0 – 10, 10 – 25, 25 – 40, > 40 Kg/Acre as P₂O₅

Potassium 0, 25, 50,100,150,200 Kg/Acre as K

Organic Carbon < 0.4 % / 0.4 -0.8 % / > 0.8 % w/v

Approx. Rs 39,500 / PieceGet Latest Price

• Easy operation
• Visual display
• Real-time monitoring
• Rapid response
• Low power consumption

• Weather monitoring stations
• Safety monitoring of high-altitude equipment
• Ports
• Solar and wind power generation
• Mobile weather monitoring vehicles
• Marine vessels
• Remote airports & helipads
• Road & rail tunnels

Approx. Rs 77,840 / PieceGet Latest Price

Model No : VT-PSL01 

Parameter

Measuring range: 0-14pH

Accuracy: ±0.01pH

Response time:<15 s

Working  environment :  Temperature:  0~65°C

Humidity:0~100%RH.

Power supply and output method

Power suppply:

12-24V DC;

Output signal: RS485/4-20mA/0-5V/0-10V 

Approx. Rs 29,500 / PieceGet Latest Price

Body : Mild steel 

Principle : Resistance Type

Moisture Range : 3.5% to 40% 

Consistency : ± 0.2% 

Test cup : Stainless steel 

Transducer : High compression unit removes the porosity effect. 

Minimum sample of grain : More than 30 cubic centimeter 

Principle of measurement : Resistance. 

Temperature compensation : Automatic 

Range selection : Automatic 

Low Bat indication : Automatic 

Error conditions : Displayed. 

Power : 9 V DC Adaptor, operated through 230V, 50 Hz, AC main or 6(R-20) type dry cells. 

Size (L x B x H in cm) : 30x18x19 cm (approx.) 

Weight : 9.5 Kg (approx.)

Additional Information:

• Delivery Time: 2-3 weeks