Nunes Instruments

Display Type	Digital
Brand	V- TECH
Weight	6, 12, 24, 48 Joules
Power	220V AC, 50Hz
Phase	Single

For this, the packaging containers must have a proper strength to provide resistance towards forces that may damage the packaging. There are many different forces that can damage to the packaging or puncture it. The Puncture Resistance Tester is the one instrument that is used fortesting the ability of the packaging materials such as cardboard, corrugated sheet and paper to resist any puncture due to any external force exerted on the packaging.Nunes Instruments is one of the premium puncture resistance tester suppliers and offers one ofthe most accurate and efficient testing instrument that can be used extensively in the packagingand paper industry to test the sturdiness and strength of the paper products to ensure the best quality of the products.The packaging of the products is of great importance as these packaging are mainly responsiblefor keeping the products safe and sound when they are stored and transported. To ensure that the products will be safe during their journey, it is essential that quality and strength of the packaging containers is of best level. In order to ensure best quality of containers, the qualityand strength of the materials also must be tested accurately and precisely. There are many different test procedures that must be run on the materials to ensure that the quality of materials is of best level. One such test is the puncture resistance test which is run on the samples to determine the amount of resistance that is offered by the sample when it is subjected to a high amount of external force which can cause puncture in the sample. Nunes Instruments Puncture Resistance Tester is one of the most efficient testing instruments that deliver highly accurate testing data for strength of the packaging materials such as papers,cardboard and corrugated sheets. During the test, the test specimen is clamped on a fixture. The instrument is given with a pendulum that is responsible for exerting the test force on the specimen. The pendulum is released at an angle of 90.The head of the pendulum is in the shape of a pyramid which has a pointed edge. There are different weights that are used during the testing procedure until the specimen is punctured. The scale attached with the pendulum givesthe reading of tests. The instrument is made from very high quality mild steel and also given with a digital display for most accurate readings. With the help of this instrument, the manufacturers of different packaging materials can rest assured that the packaging of the products can withstand the forces from the sharp edges and corners and can keep the products safe during handling and transportation.

Power	100 to 1800
Grade	SS
Display Type	Digital
Brand	V-TECH
Material	Acrylic
Color	Blue
Temperature Ambient	- 20oC
Dimensions	40 mm x 15 mm

Crease Recovery Tester determines the property of textiles to recover from crease by measurement of the recovery angle with loading & clamp. In text specimen is first creased under a specified load for specified period of time and it then transferred to the angle measuring device where one of its ends is held in a spring loaded clamp.

Model Name/Number	VT 300+
Usage/Application	Measurement
Frequency	from 70 MHz
Voltage	100V to 5kV
Refresh frequency	20 Hz to 3 MHz
Storage Temperature	1000 DegreeC to 1400 DegreeC
Measuring Rate	35 to 65%

• Non-destructive test of the ferrite content in a non-destructive test of the ferrite content in a Non-destructive test of the ferrite content.

• Range of 0.1 to 115 FN equivalent to 0.1 to 80.5%

•  

  Fe in austenitic and duplex steel.

•  

  Robust and portable

•  

  Estimate of ferrite percentage (70% of FN)

Brand	V-TECH
Model Name/Number	VT-550
Type	Digital
Accuracy	1 Hz
Air Humidity	NA
Calibration	Optional
Dimension	59 x 26 x 160 mm
Housing Material	Plastic
Temperature Range	-10 Degreec to +50 Degreec
Weight	335g(not including batteries)
Mount Type	Digital
Power Consumption	Batteries 2 A
Range	10Hz ~ 5000Hz
Resolution	+/-1 N
Usage/Application	Industrial
Frequency	10 Hz to 5,000 Hz
Power Source	Batteries 2 A
Voltage	1 .5 volt

• High Quality Sensors, Data Output to PC, Wide Measuring Range
• Pre-Install be;t unit mass, automatic Trigger, Large Capacity Memory
• Automatic Cancellation of Background noise
• Auto Power-Off

Model Name/Number	VT-3A
Usage/Application	Industrial
Display Type	Digital
Brand	V-TECH
Ratio Range	1-200
Accuracy	+- 0.1 % rdg and +-0.1% rng
Grade	Automatic
Resolution	5 Digits
Excitation Voltage Range	Range 55V @ 50 Hz
Phase	3 Phase

Automatic Transformer Turns Ratio Meter measures no-load Turns Ratio of Transformer. It means Ratio of High Voltage Winding to Low Voltage Winding of Transformer. It is capable to test Y-y. D-y. D-d & Y-d configuration. Turns Ratio can be read directly from front LCD display. It also measures and display % Deviation & Excitation Current. VTRM has inbuilt Data Storage Memory up to 200 Test Results. It can transfer all test results to Computer using dedicated Software & computer interface.

Brand	V-TECH
Accuracy	+-2"(+-0.03o)
Material	SS
Usage/Application	engineering and construction
Range	-360o to +360o
Angle	0 - 360 degrees
Resolution	1' (0.01o)
Repeatability	1'

• High Precision instrument for accurate angle measurements on machine, molds, jigs.
• Can be attached to height gauges
• Range: -360 to +360
• Accuracy : ±2"(±0.03
• Repeatability : 1'
• Resolution: 1' (0.01

Brand	V-TECH
Power Source	230 V AC / 50 Hzs.
Usage/Application	Textile, Packing Industry
Speed Range	10 mm/min - 300 mm/min
Phase	Three
Range	0 -20.000 Kgf
Accuracy	0.01 Kgf

wide range of Adhesion Tensile Testing Machine which is suitable for testing tensile strength and elongation of different various material. Our range is customized as per the specifications of our clients and complies with various industrial standards.

Model Name/Number	V-TECH
Usage/Application	Industrial
Display Type	Digital
Load Capacity	5 KVA
Brand	V-TECH
Accuracy	v+-1.0% of reading +-2 Digit
Output Current	0 to 500 Amp
Output Voltage	6.0V AC Single Phase output 50Hz
Power factor	0.85 or above.
Input	Single Phase 230V AC @ 21A, 50Hz.
Burden/Compliance/Rating	3.0KVA maximum with current limit
Resolution	1A

A Primary Injection test is helpful for substations or circuits with voltage and current. It is just the floe of rated current in the circuit under test.

Conductivity Range	1000 mS/cm
Display Type	1 character x 2 lines BL LCD
Dimension	235 x 245 x 80 mm
Weight	3 kgs
Voltage	230 V
Features	Auto Temperature Compensation
Data Storage	1000 samples
Digital Output	RS-232 Parallel Centronics
Sensors	PT1000 probe

• 128 x 64 dots Graphical LCD Display
• pH, EC, TDS & Temperature Measurements
• Auto Temperature Compensation
• Auto Buffer Recognition in PH Mode
• Programmable Ref. Temp & Temp. Coeff in EC Mode
• 1000 Samples Storage Facility & Attachment  for Serial dot matrix / thermal printer

Model Name/Number	VT 8800
Display Type	Digital
Brand	V-TECH
Type	Fuel Cell Sensor Module
Waning Signal	Beep, Vibration, Light
Type of Mouth Piece	Replaceable

• It is connectable with smartphone via Bluetooth function, so possible to manage data and share by SMS, SNS & e-mail

•  

  Test result, date, time, name, and picture can be saved and managed conveniently

•  

  The enhanced quality check function “Self-Diagnosis System (SDS)” on an app will verify the quality of breathanalyser’s sensor and will make sure the accurate and reliable test result.

•  

  It provides camera on / off mode to verify your actual testing by the picture of subjects face.

Model Name/Number	VT-9100
Brand	V-TECH
Dissolved Oxygen Range	20.00 mg/L
Dissolved Oxygen Resolution	0.01 mg / l
Usage/Application	Laboratory
Dissolved Oxygen Accuracy	+-1%
Accuracy	+-1%
Resolution	0.1%
Temperature Compensation	0~60
Power Supply	3*1.5V
Weight	80g
Disolved Oxygen Accuracy	0.5% FS
Calibration	Automatic

Description. Bluetooth dissolved oxygen meter is a precision instrument for measuring dissolved oxygen and temperature. The dissolved oxygen probe is a thin film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation.

Usage/Application	Laboratory
Power Consumption	300W
Frequency	50HZ
Range	3.2 - 38.1mm
Weight	8 kg
Test Panel	200mm, 75mm, 0.8mm
Overall Dimensions	300 mm x 120 mm x 83 mm
Model Number	VT-22

Conical Mandrel Tester is applicable to determine extensibility of paint coatings on metal panels which are clamped in position and formed round the conical mandrel by rotating of the roller frame. The panels are examined to evaluate crack resistance and detachment from the metal substrate of coated surface which is coated with paint under standard condition.  

Usage/Application	Bend Tester
Frequency	50-60 HZ
Weight	4.2 kg
Test Panel	max 150 x 100 mm
Material	Stainless Steel
Automation	Manual
Surface Finish	Paint Coated
Thickness	Less than 0.3 mm

Cylindrical mandrel tester is used to assess the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastic substrate when subjected to bending round a cylindrical mandrel under standard conditions. This tester consists of three PVC rolls which are arranged side by side and run on pivoting bearings. The test can be carried out either as a pass / fail test, to assess compliance with a particular requirement; or by repeating the procedure using successively smaller mandrels.

Usage/Application	Industrial
Material	Mild Steel
Display Type	Digital
Weight (Kg)	23
configuration	Main frame, Digital measuring head

• Easy and accurate readings · Adjustable measurement operations,customizable · Equipped with LED screen ·
• To determine resistance of glass container, PET Bottles, HDPE Bottles, Confectionery Jars etc. against Vertical/Top Load.

Cell Constant	0.1, 1.0, 10 adjustable
Power Supply	DC 9V, using AC Adapter 220VAC, 50Hz
Make	V-TECH
Power Required	220 V AC, Single Phase, 50 H
Dimensions LxWxH (mm)	210 X 205 X 65
Model	VTCM-20
Brand	VTech
Color	Multi
Calibration Points	1 point per range
Overload protection	Up to 500gm
Usage	Industrial
Weight	1.75 kg

Minimum order quantity: 1 Piece

 

 

Direct reading Specific Digital Gravity Balance provides a simple and quick mean to read directly the specific gravity of rubber and other elastomers. Thus reducing labour and eliminating calculations. The time taken to find out specific gravity of a sample is only about half a minute. The balance consists of a rigid scale with a specific gravity (SG) printed on standing vertically on a heavy base plate. To the centre point at the scale, through jewel bearings to minimize the friction, a balancing arm is pivoted. At one end of the arm, two stainless steel pins are hanging with yarns. One of the pins is attached to glass jar kept on the base. A guard is provided to avoid accidental falling of the jar during use. At the other and of the balancing arm a pointer is fixed which indicates the specific gravity of materials under test. A sliding weight is also provided for initial balancing of the sample of different weight a levelling of the base plate. Two models of balance, one with a range of specific gravity between 0.9 to 3.0'' the second with a range of specific gravity / between 0.2to2.0 are available. A sample of any shape weighing between 5 and 12g can be tested in the first model, that weighing between 3 and 5g can be tested in the second model, and that weighing between 1and 2g can be tested in the third made. In the case of the second and third model, the lower pin is quite heavy and also acts as a sinker. Also in these models, the glass jar is kept on the base of a frame, which can be slid up and down on a rod fixed to the base plate to cover the full range at specific gravity

Product Details:

 

 

SPECIFICATION:

Max Error: 0.1%

Overload protection: Up to 500gm.

Display: 16 char X 2 lines big LCD display with green backlight

Test Fixture: Powder coated Mild Steel for long life

Automatic calibration (through keypad for weigh scale): 250 ml Boil beaker

Power Required: 220 V AC, Single Phase, 50 H

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

 

Brand	V-Tech
Material	Mild Steel
Usage/Application	Laboraory
Voltage	240V
Frequency	50 Hz
Country of Origin	Made in India

Minimum order quantity: 1 Piece

The test rig comprises of a two-stage air compressor  tted with an air tank with orifice,pressure gauges 9 an energy meter to measure the input & a Temperature indicatormeasures the temperatures at various points. The compressor is mounted on air receiver along with the motor, and is provided with air relief valve (safety) and a pressure switch. The unit determines volumetric efficiency and isothermal efficiency at various discharge pressures. 

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Brand	V-Tech
Usage/Application	Laboraory
Voltage	230V
Pressure	70-110 Bar
Temperature	20-40 Deg .C
Type	Air Compressor Test Rig
Country of Origin	Made in India

Minimum order quantity: 1 Piece

This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Brand	V-Tech
Voltage	230 V
Phase	Single Phase
Body Structure	Fabricated from mild steel material
Balls Free Fall Height	1 meter
Steel Ball Diameters	Chrome steel ball 19 +- 0,05 mm
Paint	Powder coating
Country of Origin	Made in India

Applications:
Instrument for the determination of the resistance to the impact of the ceramic tiles.Determination of the coefficient of restitution by dropping a steel ball from a fixed height onto the test specimen and measuring the height of rebound.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Weight	70 kg
Measuring range	0.1~5000N
Test Space	(160*160*110)mm
Force resolution	0.1N
Compressing speed	12.5mm/min
Return Speed	12.5mm/min
Unit force	N,lbf,kgf
Dimension	400mm(L)*360mm(W)*740mm(H)

Paper cup compression tester is for the compression strength and stacking ability of medium and small size packaging like corrugated carton, box, cup, etc.

Paper cup compression tester technical feature:

• LCD display, PVC operation manual, human design
• Microcomputer processing system, automatic measurement, test result intelligent judging, self-reture
• Microcomputer data collecting and computing, microprinter4. Real-time data display
• Three test modes of flat crush test(FCT), edge crush test(ECT), ring crush test(RCT)

Technical Data

• Accuracy:≤±1%
• Deformation measurement accuracy: ≤±1mm

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Usage/Application	Insulation Resistance
Brand	V-Tech
Display	LED
Measuring Frequency	0 to 36 Newton Meter
Power Source	AC220V
Country of Origin	Made in India

For determining the puncture resistance of corrugated board by measuring the energy required to puncture it. Interchangeable weights supplied to cover four energy ranges

Measuring Range: 0 to 36 Newton Meter

Power Source: AC220V

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Hammer Mass	135g
Display Size	17 x 71 pixel graphic
Brand	V-TECH
Accumulator Capacity	~150mAh
Impact energy	0.735 Nm
Spring Extension	75mm
Dimensions of Housing	55x 54x 245mm ( 330m to tip of plunger)
Charger Connection	USB Type B (5V, 100mA)
No of Series Names	50 Series names (up to 12 characters)
Weight	648g
Spring Constant	0.262 N/mm
Dimensions of Tip	94 x 15mm dia
Operating Temperature	0 to 50 deg C
Country of Origin	Made in India

Product Description

The paper roll hardness tester is the first rebound hammer designed specifically for the testing of the roll profile. Extensive field tests carried out at major and converters have consistently shown that it provides previously unachievable accuracy and repeatability of the roll profile.The instrument is fully compliant with the standard used to regulate the test of the paper roll profile and it delivers instantly all of the key parameters required for assessing the quality the of paper roll. In addition to this the paper has an extended lifetime to cope with the heavy demands of the paper industry and dedicated tools, such as pre-defined tolerances that make assessing a roll profile a simple matter.

cast aluminum and chrome steel	Transparent synthetic
Temperature	minus 15C to plus 65C
C and RH	0- 100 %
Minimum Order Quantity	1 Piece
Feature	Low Maintenance
Colour	Multi
Relative Humidity	0-100%
Made	cast aluminum and chrome steel

Minimum order quantity: 1 Piece

We are suppliers of Thermo-Hygrograph

Features and Benefits

• Can be easily mounted or hung on the wall
• The carrying-handle for ease of portability
• Easily detachable housing simply slides out
• Removal of the drum is simplicity itself
• Attaching recording graph paper is simply and easy

Specification:

• Isuzu Quartz Thermohygrograph
• Model: VTH-25R, VTH-27R
• Temperature Range: -20 to 50°C deg
• Minimum graduation: 1°C
• Humidity Range: 0-100%RH
• Minimum graduation: 1%RH
• c/w 7 Days Chart Paper, batteries

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

 

Capacity	100 kgf
Display Type	LED (Digital)
Power	220V , Single phase, 50 Hz
Accuracy	+-2% at full load (with master load)
Material	Mild Steel
Least Count/ Resolution	0.01 kgf
Test Speed	12.5+- 2.5 mm/min
Finish	Powder coated Havel Gray & Blue combination finish and bright chrome /zinc plating for corrosion
Storage Capacity	1000 readings
Dimensions	600 x500 x863 mm
Feather touch controls	Yes
Safety Switch	Upward & Downward Limit Switches
Country of Origin	Made in India

Minimum order quantity: 1 Piece

The RCT,SCT, CMT, ECT, CCT, AND FCT Strength tester measures the rigidity of

CFB on edgewise.

•Microprocessor based display for accurate test results

•Display for compression strength of test specimen

•Separate mixtures for ring crush, edge crush and  at crush test.

•Highly accurate test results under compression force

•Strong gripping clamps.

•Bright LED display

•Inbuilt calibration facility

•Feather touch controls

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Usage/Application	Metal Testing,Scrap
Display	LCD
Model Name/Number	VT1503+
Brand	V TECH
Color	White
Feature	Detect and Measure (Beta),(Gamma) and X-ray Radiation
Power Supply	Requires 2 x AAA batteries (included).
Country of Origin	Made in India

Minimum order quantity: 1 Piece

FEATURES:
Detect and Measure  (Beta),  (Gamma) and X-ray RadiationSimple interfaceMulti-threshold audio alarm with range from 0.10 to 0.90 Sv/hBACKGROUND mode detection: designed to identify sources of higher radiation compared to base level

PRODUCT DETAILS:

• Brand V-TECH
• Model Name/Number VT1503+
• Display Type LCD
• Feature Detect and Measure (Beta),(Gamma) and X-ray Radiation
• Power Supply Requires 2 x AAA batteries (included).
• Usage/Application Metal Testing,Scrap

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Material	Mild Steel
Usage/Application	Laboratory
Display	LED
Automation Grade	Semi-Automatic
Capacity	50 KN
Brand	V- TECH
Country of Origin	Made in India

Product DescriptionOur range of triaxial shear test apparatus is totally automated stress-pathsystem for soils. The modules of our range like load frame, confining pressure, back pressure, pore pressure or volume change are completely controlled by the dedicated computer. The specimen is assembled in the triaxial cell and for the required parameters like strain rate, confining pressure and back pressure are programmed through the computer. System have window based software for controlling and data acquisition.
The triaxial shear test apparatus shall confirm with the requirements of is : and are made from corrosion resistant material. The triaxial compression test, is used to simulate all combinations of practical stress and strain conditions, occupies at present a fairly dominant position in soil testing.

Features

• Shear in UC, UU, CU, CU & CD.
• Stress path triaxial test.
• Ko consolidation and swelling test (optional).
• One loading unit, for single unit, for single cell mounting, capacity 5 tonnes. Supplied with motorised load frame.
• The loading unit is supplied with one dial gauge bracket. One Triaxial Cell for 38 mm dia specimen, stationary bushing.
• Por Pressure Gauge 0-10kg/cm2. complete with foot pump and rubber hose. One dial gauge 0.01 mm X 25 mm for strain measurement.
• One High sensitivity Proving Ring, capacity 30/50kn. complete with calibration report and carrying case.

Load Frame, Mototrized, 12 speeds, 50 Kn ( 5,000 kgf )

Two pillar type, detachable frame, enclosed motor and gear system, jewel lamps indicating direction of motion, speed chart, operational ease, useful for both triaxial and cbr tests. The load frame consist of a cabinet which can house the gear system and motor with sturdy angle iron frame. The loading is donethrough the bottom loading platen, which is carried on a lead screw, which advances upwards. The top load bracket, which slides over two upright pillars, can be made positioned at any desired height and should be lockable. It should carry a screw adapter for standard proving rings. The loading part of the unit should be detachable from the main unit for ease of transport and to avoid damage to the tension rods. Load frame should having following strain rates: 12 speeds (between 0.0064 mm / min and 1.25 mm/min.)it should besuitable for operation on 220 v, 50 hz, single phase, ac supply.
Triaxial Cells (38mm and 50mm dia)

All parts are made from corrosion resistant material. Particular attention is paid to the quality of the nish between the stainless steel plunger and the bushing. The cell cylinders are made from acrylic plastic material and those for use up to 20 bar (20 kg/cm2) are usually reinforced by bands. Each cellhas four take-off positions, drilled in the base, for cell pressure, pore water pressure, drainage or back pressure. All valves are of no-volume change type.

Pore Pressure Apparatus

This pore pressure measuring apparatus consists of a screw pressure pump, null indicator in perspex, pressure gauge, mercury manometer, volume change burette and the necessary connecting tubes and valves. It is used for measuring pore water pressure and pore air pressure in soils.

It shall consist following accessories :

Pressure Gauge : Bourdon Tube Type- 1000 kPa (10 kg/cm2 ) capacity,Graduation : -1.0 To +10 bar in 0.1 bar division (.1 to 10 kg/cm2)divisions) Dia : 200 mm
Manometer : Glass U-Tube, measures low positive and negative pore pressureand helps To check zero error of pressure gauge. It is provided with a mercurytrap. (Mercury is Supplied at extra cost)
Mercury : for filling manometer tubes and null indicator

Voltage	220 V
Model Name/Number	VT
Brand	V-Tech
Usage	Brightness, Whiteness
Test Items	Whiteness, Transparency, Opacity
Country of Origin	Made in India

Minimum order quantity: 1 Piece

Brightness meter is intended for measuring the brightness, opacity and gloss of the paper. It is photoelectric measuring instrument, which conforms to the international standards. Digital readout of solid state electronic circuit eliminates the possibilities of reading errors and provides high speed operation. 
It gives precision measurments with less than ±0.5% FS deviation between the instruments.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Model Number/Name	VT6003
Temperature Range	Up to 400 Degreec
Display Type	Digital
Brand	VTECH
Power Supply	Electric
Grade	Automatic
I Deal In	New Only
Accuracy	+/-1 Degree c
Resolution	0.1 Degree c
Digital Timer Range	Digital timer Range up to 999.9 min/ 999.9 sec

• This Instrument is in according to V-TECH D 1238, BS, DI, ISO, IS (Indian Standard) or according to customer’s required specification
• PID based temperature controller with auto-tune facility
• Having preset facility and buzzer output
• Applied weight manual

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Material	Stainless Steel
Brand	V-TECH
Display Unit	Bar
Model Name/Number	VT
Touch screen	HMI Touch Screen
Pressure	gauge pressure
Country of Origin	Made in India

Minimum order quantity: 1 Piece

V-TECH offers its most advances Leakage test system designed for any types of automotive components. This is a dry air leakage test system based on differential pressure (DP) principle. The differential pressure leak test, is easy to set up, but can prove much more sensitive in certain leak detection applications. The sensitivity of the transducer is not related to the actual pressure in absolute or gauge pressure terms, but to the sensitivity of the differential pressure transducer at the test pressure. V-TECH make DP Leakage Testers are unparalleled and well suited to differential pressure test requirements in the automotive, engineering & pharmaceutical sectors.

APPLICATION:

Suitable for Leakage testing of any types of component in automotive, engineering & pharmaceutical industries. HMI touchscreen models are also available for Pressure decay & vacuum leak testing.

FEATURES & SPECIFICATION:

• Portable, easy to use & user friendly Differential pressure (DP) type
• Menu driven HMI touch screen display Measuring units in BAR & PASCAL both
• On line graph plotting facility
• USB port to connect pen drive for test data storage
• Rugged, robust with heavy duty performance Password protected
• Cost effective
• Precision measurement of leak values
• OK / NG indication with buzzer
• Special port provided for use of leak master

 

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Type Of Testing Machines	Cover Cylinder Head
Material	Stainless Steel
Brand	V-TECH
Voltage	220 V
Automation Grade	Automatic
Frequency	50 Hz
Phase	3
Model Name/Number	VT
PC Interface	RS 232 C
Country of Origin	Made in India

Minimum order quantity: 1 Piece

The original dry-air method is pressure decay, in which the test part is pressurized and then isolated from the pressure source. Because air moves from a high-pressure area to a low-pressure area, any decrease in pressure indicates the presence of a leak. Algorithms then convert pressure changes into an approximation of the leak rate.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Display Type	Analog
Brand	V- TECH
Automation Grade	Automatic
I Deal In	New Only
Country of Origin	Made in India

OVERVIEW :

• The Barcol Hardness Tester is a convenient tool for testing the hardness of aluminum, aluminum
• The Barcol Hardness Tester is a convenient tool for testing the hardness of aluminum, aluminum alloys, copper, brass and other materials including plastics, Fiberglass & FRP having hardness from 25 to 150 BHN (10 mm ball / 500 kg load).
• The instrument is designed to use on fabricated parts and assemblies as well as on raw stock.

FEATURES :

• No experience is required.
• Can be used in any position and in any space that will allow for the operator's hand. 
• The hardness reading is instantly indicated on the dial, which is divided into one hundred graduations.
• No waiting, pre-loading or separate measurements.

TEST PROCEDURE :

• The specimen is placed under the indentor of the Barcol hardness tester and a uniform pressure is applied to the specimen until the dial indication reaches a maximum.
• The depth of the penetration is converted into absolute Barcol numbers.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Shelf Life	12 Months
Model Name/Number	VT
Type Of Testing Machines	surface wettability/surface energy
Display Type	Digital
Brand	V-Tech
Country of Origin	Made in India

• Flexible packaging industries for ensuring adequate print adhesion on LDPE/HPE/

        B.O.P.P. such difficult to print plastic films.

• For coating and laminating industries to ensure satisfactory ply bond strength or

         adhesion.

• Plastic blow moulding industries for satisfactory print adhesion and sticker adhesion

         on plastic containers.

• Also for other industries for testing surface wettability/surface energy.specially

        designed  et pens, gives a continuous and uniform layer of ink, which is essential        for accurate assessment of test result instruction on 'how to use is available with the        set'.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Phase	Single
Frequency	50 hz
Power	230 v ac + 10%,+24 v dc/500 ma
Overall size	96 mm x 96 mm cut out - 90 mm x 90 mm,overall 72 mm x 72 mm cut out - 69 mm x 69 mm
Memory type	Nonvolatile memory
Digits range	4-6 digits

Minimum order quantity: 1 Piece

PRICE RANGE: Rs. 12500 onwards

Specification :

• Pressure gauge with rubber protection
• Pressure gauge Diameter: 75mm
• Test pressure : max 21 bar / 300 psi
• 4 Adapters : M10x1.0mm M12x1.25mm M14x1.25mm M18X1.5mm
• Hose Overall length: 430mm
• Pressure tube length : 150mm
• Angled pressure tube length : 160mm
• Case Size : 265 x 210 x 65mm

Features:

• -This compression tester can be quickly set to your bike / car , then you can get accurate
• readings in valves , piston rings , cylinder bores or head gaskets .
• -Manometer with double graduation ( 0 to 300 psi , 0- 21 kg / cm 2 ) and with rubber
• protection to prevent scratches
• -Drain valve with full copper nickel plating, anti -oxidation and corrosion
• - M10 adapter is suitable for motorcycles, M12 M14 M18 adapters are suitable for car.

Package Includes:

• 1 x compression tester of 0-21 bar and 0-300 psi
• 1 x Hose , length 430 mm
• 1 x Adapter M 10 x 1.0
• 1 x Adapter M 12 x 1,25
• 1 x Adapter M 14 x 1,25
• 1 x Adapter M 18 x 1,5
• 1 x pressure pipe with rubber attachment ( straight line)
• 1 x pressure pipe with rubber attachment ( Angled )
• 1 x Plastic Case (red)
• 1 x Instruction in English

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Model Name/Number	VT
Pressure Gauge	0-420 Kgf/cm2
Connecting Thread	14 x 1.5 M
Usage/Application	Disel Testing
Display Type	Analog
Color	White
Brand	VTECH
Display	Analog
Country of Origin	Made in India

PRODUCT DESCRIPTION

Since inception, we are engaged in catering to the variegated requirements of the customers by bringing forth exclusively designed Nozzle Tester. Designed and developed utilizing optimum-grade raw material like aluminum, these products are manufactured at our vendors base. Post-production, these products are tested on various quality grounds, before final delivery at our customers' premises

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

 

Chain Guide Bar Length	13 to 20 inch
Model Name/Number	VT
Brand	VTECH
Warranty	1 year
Usage/Application	Industrial
Weight	200 g - 5 Kg
Color	grey
I Deal In	New Only
Power Source	Electric
Country of Origin	Made in India

Minimum order quantity: 1 Piece

We are offering a Chain Saw. A handy substitute of other Hand Tools used for cutting logs.You can also purchase other accessories of saw chain from us like chain locks, Guide Bars, Rivets, etc.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Material	Reflux Extractor 4000
Model Name/Number	VTRE-010
Usage/Application	Industrial
Display Type	Analog
Brand	V-Tech
I Deal In	New Only
Country of Origin	Made in India

Minimum order quantity: 1 Piece

Reflux extractor 4000 gms model no : vt – 4010
Standards:astm d 2172- aashto t 164

Specification:
The simple apparatus working on the same operation principle of consisting Of cylindrical glass jar supporting two metal cones of stainless steel cloth And a metal condenser on top of the jar. Supplied complete with 100 filter Papers & wire gauge, hot plate.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Application	Industrial
Frequency	50 Hz
Easy Handling	Yes
Pocket Friendly	Yes
Light Source	35W Sodium
Wavelength	0.575 micron
Power	220 V (110 V available on request)

Minimum order quantity: 1 Piece

V-TECH India offers two different types of Monochromatic Light source. Monochromatic Light Source are used in Calibration labs for inspection of Micrometer Anvils & Mechanical Seals, Pump Valves and various other Automotive Parts manufacturers. V-TECH India Monochromatic Light Source provides highly diffused Sodium light for use in testing flatness of flat parts with Master Optical Flats. Sodium Vapour Light is directed on to the component under inspection through a plane acrylic sheet with a straight line marked on its face. It produces Excellent Contrast Fringes.

Model VT-01:

• This is used when the Optical Flat is less than 150 mm diameter. The Optical Flat is placed over the polished part under inspection. The light bands are viewed over the Optical Flat from above

Model VT-02:

• The part to be inspected is placed over the Optical Flat and the light bands are viewed from beneath after reflection from a mirror. This Type Monochromatic Light Source is used when the part under inspection is thin and of large diameter. If an Optical Flat of large diameter is to be placed on such thin parts there would be deformation of fringes due to the weight of large size Optical Flat. To avoid this the part to be inspected is placed over the Optical flat and the fringes are viewed after reflection from a mirror placed below.
• The Master surface of the Optical Flat face upwards and the test surface face downwards and are in contact to view the light bands. MLS-02 is suitable for use with 200 mm diameter Optical Flat. On request MLS to suit Optical Flats larger than 200 mm diameter is manufactured against specific Order.

Specification:

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Material	Steel
Numbering Head Digit	6
Stamp Ink	Integrated Ink
Brand	V-TECH
Dimension	81*60*151MM
Country of Origin	Made in India

• Numbering Machine Is made of High Quality Steel Material for Long Lasting Usage.
• Round and Smooth Handle of this Numbering Machine for Comfartable Hold and Steel Numbers for Clear Stamping.
• Auto number shifting function of this Numbering Machine for Easier Using Experience
• Integrated Ink of This Numbering Machine avoids ink leakage and assures Clear Stamping of Number.
• Product Dimension: 81*60*151MM, 364GM

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Material	Stainless Steel
Brand	V-Tech
Production Capacity	1000
calibration	with 6 months valid calibration
Country of Origin	Made in India

Product Description

• Density Strip for densitometer
• (9 steps, D <1 to >4)
• with 6 months valid calibration. 
• Production Capacity - 1000

 

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Brand	V-TECH
Material	Stainless steel
Platform dimensions	90 mm h x 80 mm diameter, approximate
Magnifier	X 10 magnification,0.1 + mm resolution,0~10 mm scale
Force exerted on sample	20 n, + \ - 0.1 n
Case dimension	300 w x 180 d x 115 h
Overall dimension	270 mm w x 55 M d x 125 mm h, approximate
Diameter	5 mm
Country of Origin	Made in India

The Ball Pressure Test Apparatus is used to check the integrity of dielectric material with respect to resistance to elevated operating temperature. The ball pressure test is referred in IEC 60335, IEC 60695, IEC 60950, IEC 61010, IS 302, IS 1293, IS 3854, IS 2215, BS, UL, CSA and European norms. The Ball Pressure Test Apparatus model BP 21 takes care of this testing useful for insulator manufacturers and other electro-technical manufacturers who use insulating material in their electrical appliances. The BP21 is made of stainless steel for long life.

 

As described by popular standards, the unit under test is placed on a platform and the ball pressure test apparatus is placed on top of it. The whole assembly is then and the temperature inside the oven is maintained at certain temperature for certain time as specified by the applicable standard. After the test time, the ball pressure test apparatus along with the unit under test is removed from the oven and the unit under test is allowed to return to ambient temperature. The depression created by the ball pressure test apparatus in the unit under test (due to softening) is measured. If the diameter of the impression is not greater than certain value (specified by the relevant standard), the unit under test is said to comply with the standard.

Features:

• All stainless steel construction.

• Magnifier with built-in scale for measuring the depression created by the ball pressure test apparatus.

• Supplied in a compact and neat carrying case.

• Precision engineered and manufactured for ball pressure test covering all popular standards.

Specifications:

• Ball diameter:5 mm.
• Force exerted on sample:20 n, + \ - 0.1 n.
• Material of construction: Stainless steel.
• Overall dimension:270 mm w x 55 M d x 125 mm h, approximate.
• Platform dimensions:90 mm h x 80 mm diameter, approximate.
• Magnifier: X 10 magnification,0.1 + mm resolution,0~10 mm scale
• Case dimension:300 w x 180 d x 115 h.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Material	Mild Steel
Usage/Application	Wire and Cables Industries
Packaging Type	Wooden Box
Display Type	Digital
Color	Blue
Brand	V-Tech
I Deal In	New Only
Frequency	50hz
Power	230v AC
Supply	AC
Temperature Range	Ambient To 1000 DegreeC
Net Weight	40kg Approx
Silent Air pump	One
Heater Capacity	4KW Approx
Glass parts Quartz tube	One
Country of Origin	Made in India

To determine the amount of halogen acid gas (other than hydrofluoric acid) evolved during combustion of compounds based on halogenated additives, taken from cable insulation & outer sheath.

• Air flow meter
• Temperature controller PID

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.