Research Insturments

Approx. Rs 45,000 / PieceGet Latest Price

The Barcol Impressor is a simple, portable hardness tester that is used by industrial and

commercial customers. The Impressor has been a standard in the industry for testing

raw material or field testing of final products, such as fiberglass panels, plastic extrusions,

aluminum profiles, and related materials. Compliant with the National Fire Protection

Association, NFPA1932, the Impressor is a proven device for field testing of fire ladders

after being exposed to high temperatures.

•  Aluminum
•  Aluminum Alloys
•  Soft Metals
•  Plastics
•  Fiberglass
•  Fire Department Ladders
•  Composite Materials
•  Rubber or Leather

Approx. Rs 3,950 / PieceGet Latest Price

pH meter measure the acidity or alkalinity of a substance. They are commonly used for water testing, and for biological sample analysis in hydroponics, aquaculture and agriculture. A portable meter is commonly used to measure the pH of substance such as food, beer, or wine, and is also used to test cleaning water, rinse water, and wastewater, in lab, industrial and food applications.

• Microprocessor based fast, reliable and accurate measurements.
• Replaceable Electrode Module
• Waterproof Impact resistant ABS case (IP 57)
• Large LCD display for reading convenience
• Easy Single Point Calibration
• Available in a portable pouch

pH and ORP Electrodes.

pH is the Unit of Measure used to express the degree of acidity of a substance and ideal for use in Aquariums and elsewhere.

pH electrodes and ORP electrodes are analytical sensors for measuring pH and oxidation-reduction potential (ORP). These electrodes can be for measuring either pH or ORP, or both. pH is the negative logarithm of the hydrogen ion activity in solution. The pH value of a substance is directly related to the ratio of the hydrogen ion [H+] and the hydroxyl ion [OH-] concentrations. It is one of the most common laboratory measurements because many chemical processes are dependent on pH. Oxidation-reduction is a type of chemical reaction in which electrons are transferred from one substance to another. The oxidized species loses electrons and the reduced species gains electrons. Both species must be present for the reaction to occur.

Important specifications for pH electrodes and ORP electrodes are measuring ranges and accuracies, as well as response time, which is typically given as time to reach 95% of final value. pH electrodes and ORP electrodes are available as either single cells or combination cells. Single cells, one part of an electrode pair, require separate reference electrode and are the best choice for colloidal suspensions, iodides in sample, and high percentage of solids in fluid. Combination electrodes are composed of two parts, the measuring electrode and the reference electrode. This is the most common configuration and is best for laboratory or field applications.

Reference electrodes can be either refillable or sealed. The trade-off between the two is amount of maintenance versus length of product life. Refillable electrodes obviously need more maintenance, but also last longer and typically have higher accuracies. Sealed electrodes, while not requiring refilling, have a limited life, as the chemicals inside get used up and not replaceable.

Approx. Rs 1,450 / PieceGet Latest Price

• Fast, Reliable and Accurate measurement.
• Compact Single Chamber Design
• Built-in Temperature Sensor
• Auto Shut Off Function to Enhance Battery Life
• Hold Function for Ease of Read & Record> Easy Calibration.
• Available in a Portable Pouch.

Approx. Rs 1,250 / PieceGet Latest Price

• Fast, Reliable and Accurate measurement.
• Compact Single Chamber Design
• Built-in Temperature Sensor
• Auto Shut Off Function to Enhance Battery Life
• Hold Function for Ease of Read
• Record> Easy Calibration
• Available in a Portable Pouch

Approx. Rs 1.72 Lakh / PieceGet Latest Price

Approx. Rs 19,500 / PieceGet Latest Price

• Continuous Self Tuning Circuitry for any change in workload, Liquid Level and Bath Temp.
• Uniform Cavitations through out the tank with special transducers
• Separate Oscillator Eliminates damage to Generator in case of failure of Transducers
• Using 40 Khz Frequency For Effective Cleaning with Low Noise
• Designed for complete cleaning of small and large components without dismantling
• Inner tank and Outer body made of Stainless Steel

Technical Specifications:

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 1,250 / PieceGet Latest Price

This is first time in India when we offer Battery Hydrometer to Indian industry. Till date

all battery people use are glass type bulb hydrometers which has main drawback is that

it's glass material use. We are using acid proof acrylic material to manufacture our cell

safe hydrometer. This Battery Hydrometer is useful in any battery industry. Moreover,

we assure the timely delivery of this product.

Features:

• · Unbreakable as made from acid proof acrylic material
• · First time in India
• · Only 20 ml acid required for specific gravity testing
• · Can with standard 20 kg wight on it's body
• · 8 cm resolution scale
• · Dial type indication for very easy reading
• · Affordable cost to every one
• · Long life and lifetime
• · Long life and lifetime

Approx. Rs 1.15 Lakh / PieceGet Latest Price

De Mattia Flex Tester, electrically operated with single phase motor provides information about the resistance of vulcanized rubber compounds, coated and treated fabrics to cracking when subject to flexing. Crack development in that part of the surface where stresses are set up during flexing, or if that part of the surface initially containing a crack, causes this crack to extend in the direction perpendicular to stress. This test also assesses the durability of material. The machine tests six specimens at a time. V-Tech Flexing Machines is used to test specially moulded samples for resistance to cracking or cut growth by repeated flexing. Flex testing is recommended when the flexing encountered in service is liable to simulate the action of the test. (e.g. tyre sidewalls). Cracking and cut growth increase with increasing cycles. The tester is stopped at intervals specified and the cracks evaluated. Two sets of grips on either side of the frame are reciprocated at constant frequency for a preset number of cycles controlled by a cycle counter. Samples are loaded so that they are flat when the grip are tightened and flexed but not elongated during tester operation.

The range consists of 6 machines capable of handling 12, 24 or 36 samples in either an unheated cabinet or an oven with digital temperature control having a range of 60°C to 150°C.

Features:

• Easy access cabinet or oven versions
• Cycle counter fitted with 9 - 999,999 cycles allowed/test
• Internal illumination fitted
• 60oC to 150oC temperature range on oven versions
• Motor cut outs fitted to both doors

Specimen Holding Capacity : Unheated Cabinet

• 6 Samples VT – 6
• 12 Samples VT – 12
• 24 Samples VT – 24
• 36 Samples VT – 36

Accessories :

• Three cavity specimen mould
• Six cavity specimen mould
• Piercing Tool with needle

• DeMattia Flex Testers conform with the following international standards
• BS 903 Pt A10 1999 - BSISO 132 1999
• BS 903 Pt A11 1985 - ISO 133 1983
• ASTM D 430 - 95 - method B

Approx. Rs 39,500 / PieceGet Latest Price

Features:

• Microprocessor based for fast and accurate measurements.
• Weatherproof Case and Compact Design (IP 54)
• Programmable Relay & 4 to 20mA Outputs with user defined Hysteresis
• Programmable High & Low Alarm functions
• 1/4 DIN Fitting on the Standard Industry Panel
• Galvanic separation between Input , Output & Supply
• Auto Buffer Adjustment with Automatic Temperature Compensation
• Large Backlight LCD Display

Specifications:

• Resolution: 0.01 PH, ± 1 mv, 0.1 Deg C
• Accuracy: ± 1% FS, 0.2 Deg C
• Linearity: ± 0.1% of Range
• Repeatability: ± 0.1% of Range
  

Approx. Rs 24,950 / PieceGet Latest Price

Features:

• Advance Microprocessor based with rugged housing & splash proof keyboard.
• Built-in Stirrer function platform with electrode holder for convenience.
• Large LCD display for multi parameter display simultaneously.
• Built in ATC (Automatic Temperate Compensation).
• Advance Storage / Memory function with USB Connectivity.

Specifications:

Approx. Rs 53,000 / PieceGet Latest Price

Specifications:

·         Flow Rate: 0.9 – 1.4 m3 /min free flow

·         Particle Size: Particles of 10 microns & below collected on Filter Paper holder. SPM

·         bigger than 10 microns Collected in a separate sampling bottle under the

·         cyclone.

·         Sampling Time: 28 hours (maximum)

·         Sampling Time Record: 0 to 9999.99 hrs. Recorded on a Time Totalizer.

·         Automatic Sampling: 24 hrs programmable timer to automatically shut off the system after pre set

·         time interval.

·         Power Requirement: Nominal 220 V, Single Phase, 50Hz AC mains supply.

·         Size & Weight: 430 x 320 x 930mm.38Kg

·         Gaseous Flow Rate: 0.3 lpm measured using plastic body flow meter.

·         Sampling Train: Four inlet one outlet manifold with built in needle valves for flow control of each inlet.

·         Absorbers: 4Nos. Of 35 ml. Glass impingers.

·         Size & Weight: 240 x 125 x 360mm.2.5Kg, 38Kg

·         Ice Trey: Fiber

·         Voltage stabilizer: Power Cut Minimum & Maximum (170 to 240 )

Approx. Rs 38,500 / PieceGet Latest Price

Our ultra portable & compact designed Chlorine meter can measure Total chlorine & Free chlorine with high accuracy. It is suitable for total or free residual chlorine monitoring in potable water, seawater, process water, swimming pool water, waste water, food washing, paper and pulp, etc. Our cost effective reagents are developed to provide high accuracy and minimize the operational cost.

• Microprocessor based for fast and accurate measurement.
• Reagents based on EPA approved DPD method.
• Large LCD display for reading convenient.
• Memory function stores and recall options.

Approx. Rs 73,000 / PieceGet Latest Price

We are offering Digital Fluorometer to our clients.

Specifications:

• Display 3-digit bright red seven segments LED display.
• Excitation Source 12 V, 50 W Tungsten Halogen Lamp.
• Sensitivity Range Adjustable in 4 ranges.
• Primary Filters Corning 5840 and Corning 5113 mounted on holders.
• Secondary Filters Corning 4308, Corning 3486, Corning 3385 mounted on holders.
• Detector Highly sensitive wide range photodiode/cell.
• Sample Test Tube 15 mm (D) x 80 mm (H)
• Minimum Sample 4 ml
• Power 230 V ± 10%, 50 Hz. AC
• Primary and Secondary filters: A set of 5.
• Test Tube: A set of 5.

Approx. Rs 34,500 / PieceGet Latest Price

• Microprocessor based for fast and accurate measurements.
• Weatherproof Case and Compact Design (IP 54)
• Programmable Relay & 4 to 20mA Outputs with user defined Hysteresis
• Programmable High & Low Alarm functions
• 1/4 DIN Fitting on the Standard Industry Panel
• Galvanic separation between Input , Output & Supply
• Auto Buffer Adjustment with Automatic Temperature Compensation
• Large Backlight LCD Display

• Range: 0 to 19.99µS/cm, 0 to 999.9µS/cm, 0 to 9999µS/cm, 0 to 300mS/cm, 0 to 10000 PPM , 0 to 100 Deg C
• Resolution: 0.01 µS/cm, 0.1 µS/cm, 1 µS/cm, 1mS/cm , 1 PPM, 0.1 Deg C
• Accuracy: ± 1% FS, 0.2 Deg C
• Linearity: ± 0.1% of Range
• Repeatability: ± 0.1% of Range

Additional Information:

• Item Code: SM-600

Approx. Rs 28,500 / PieceGet Latest Price