Testing Instruments For Plastic- Paper - Bottle

Approx. Rs 89,500 / PieceGet Latest Price

Burst Tester is suitable for the quantitative determination of sealing strength, heating sealing quality, burst pressure and leakage of flexible and aseptic packages. The Burst Tester can also be used to determine the sealing performance of pilfer-free bottle caps and soft tubes. The compression strength, connection strength of cap and body, cap losing strength, seal strength and butting strength of tubes are the applications.

Burst Tester Principle

The three test modes of the positive pressure method are as follows:

• Burst Test: internally pressurizes the packages until the package fails. The test pressure is the maximum pressure detected before the package fails.
• Creep Test: Pressurize the package internally to a specific pressure and maintains this pressure for a specific time. The test measure is pass/fail.
• Creep to Failure: The package is creep-tested and held until the package fails. The pressure setting is higher than that of the creep test to ensure the package fails in some time. The measure is the time until failure.

Burst Tester Features

• Three test modes of burst, creep and creep to failure are available
• PLC programmable logic controller realizes precise pressure and time control.
• 7 inch TFT touching screen for convenient parameter setting and test operation.
• Multiple groups of test parameters can be save to avoid the repetitive setting time.
• Test result auto statistics and storage.
• Dual test methods of restraint distension and unrestraint distension
• Program customization available.

Burst Tester Technical Specifications

• Inflating Head Φ4mm (Standard)
• Gas Pressure 0.4 MPa~0.9 MPa
• Port Size Φ6 mm PU hose

Additional Information:

• Item Code: NI715

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Thickness tester for plastics film and sheeting employs mechanical scanning method to measure the thickness of plastic films, sheets, board, fabrics, textile, membranes, paper, foil, wafers and other materials.

Summary of test method

A specimen is placed on the base and a weighted presser foot lowered. The displacement between the base and the presser foot is measured as the thickness of the specimen.

Thickness tester for plastics film and sheeting Features

• PLC control and touch screen operation
• Contact area and pressure are standards conformed.
• Presser foot automatic lifting
• Real time display of maximum, minimum, average and standard deviation
• Data auto statistics, storage and micro printing
• Resolution 0.1 μm

Additional Information:

• Item Code: NI705

Approx. Rs 26,500 / PieceGet Latest Price

Features

• LCD display, PVC menu type manual
• Microcomputer control, auto measuring, groups test data statistics and data storage
• Folding chuck automatic return
• Maximum, minimum, average value and variable coefficient auto calculating
• Different folding chuck and weights available
• Micro printer

Technical data

• Folding angle: 135°±2°
• Folding speed: 175±10 times/min
• Folding radius: 0.38±0.02mm
• Folding head width: 19±1mm

Additional Information:

• Item Code: 706

Approx. Rs 99,500 / PieceGet Latest Price

Features

• PLC technology and human-machine operation
• Five test modes of dry rub, wet rub, wet bleed or transfer, wet smear and functional rub
• Test speed random setting
• Dual stations arc movement structure
• Buzzer reminding after test is finished
• Precious rub circle control

Additional Information:

• Item Code: 821

Approx. Rs 19,500 / PieceGet Latest Price

The smoothness tester is used for the determination of smoothness of paper and board according to Bekk Method. It conforms to ISO527, DIN 53107, TAPPI T-479, GB/T 456 standards.

This  Tester determines the smoothness of the sample in  seconds. This instrument is especially suitable for very smooth surfaces. such as coated label papers or coated free sheets. It creates a vacuum and measures the time it takes for the vacuum to drop from 50.66 to 48.00 kPa. Alternatively, the time it takes for the pressure to drop from 50.66 – 29.33 kPa can be set. The instrument is supplied with a 1/1 vacuum chamber and a 1/10 chamber. Very smooth papers are tested at 1/10 of the volume to safe time.

Principle

Bekk smoothness: time in seconds which under a defined pressure differential is required to draw a definite quantity of air at atmospheric pressure between the surface of the test piece and a ring-shaped plane surface under specified conditions of contact.

Technical Data

• Vacuum container volume: big vacuum(380±1) ml, small vacuum (38±1) ml;
• Vacuum range:
• 1st gear 50.66kPa -> 29.33kPa
• 2nd gear 50.66kPa -> 48kPa
• 3rd gear:50.66kPa -> 48kPa;
• Test area:(10±0.05)cm²
• Test Pressure: (100±2)kPa (Automatic pressure)

Approx. Rs 29,500 / PieceGet Latest Price

Our organization is pioneers in offering a wide array of Liquid Limit Device.

Specifications:

• Consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged.
• The cup is raised & drop a height of 10 mm on to the hard rubber base, by the help of a lead screw provided at the back of the sliding carriage

Liquid Limit with Counter & Tools

• Liquid limit, Motorized cum hand with counter & tools

Spares:

• Grooving tool ASTM (Type A)
• Grooving tool (Type B)
• Gauge block
• Counter
• Determination of liquid Limit simply & quickly
• Facility exists for adjusting cone height in relation to the specimen. Complete with Penetration cup brass. Scale type
• Cone Penetrometer, Automatic (Universal Penetrometer)

Approx. Rs 35,000 / PieceGet Latest Price

Principle

Approx. Rs 19,500 / PieceGet Latest Price

We are one of the leading traders of Shore Hardness Tester, which can be customized in accordance with the requirements of the clients. These shore hardness tester with long lower part are manufactured using quality material at our vendors facility. Our quality product finds application in measurement of the penetration hardness of rubber, elastomer's and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials. These are designed by the experts for plastics, Formica, Epoxies and Plexiglas.

Additional Information:

• Item Code: HT6510A

Approx. Rs 8,000 / PieceGet Latest Price

Keeping the variegated demands of customers in mind, we are offering quality assured array of Water Test Kit. This Water Test Kit is used detect the harmful chemicals and contamination in water. Our product range is used in industries like drinking water, fisheries and agriculture.

Features:

• Compact and Mobile
• User Friendly
• Accurate results

Approx. Rs 5,000 / PieceGet Latest Price

We provide Arsenic Test Kits that is used in determining that how well the soil is performing and its arsenic content. This easy to use kit helps in providing an index of nutrient availability or supply in the soil and the basis of fertilizer recommendation for a given crop.

Features:

• Useful to test arsenic in water
• Range: 0 to 200 micro gram/L
• Uses special reagent
• Test by Color chart method with distinct colors for each value
• Time of test reduced from 45 minutes to 10 minutes
• Even semi-skilled and unskilled persons can test in the field
• Shelf life of reagents is one year Reagents readily available for replenishment.

Approx. Rs 98,000 / PieceGet Latest Price

Elmendorf type tear tester for film measures the average force to propagate tearing through a specified length of plastic film or nonrigid sheeting after the tear has been started. It helps to rank relative tearing resistance of various plastic films and thin sheeting of comparable thickness. Elmendorf type tear tester for film principle: Acting by gravity, the pendulum swings through an arc, tearing the specimen from a precut slit. This loss in energy indicates the force required to tear the specimen.

Elmendorf type tear tester for film Features

• PLC technology and human-machine interface.
• Wide test range for different materials
• Pneumatic specimen clamping
• Pendulum automatic release
• Data auto statistics, storage
• Microprinter
• Elmendorf type tear tester for film technical data
• Tearing Arm 104±1mm
• Tearing Initial Angle 27.5 ±0.5°

Approx. Rs 1.75 Lakh / PieceGet Latest Price

Principle:

Features

• PVC menu type operation panel
• Microcomputer control with data statistics, storage and printing function
• Auto measuring and intelligent judgment, real time display of test result
• Four gears adjustable
• Protection design and stable performance

Technical data

• Four gears: A ¿¿¿6J; B¿¿¿12J; C¿¿¿24J; D¿¿¿48J;
• Pressure head: (100±2)kpa
• Friction sleeve resistance: ¿¿¿0.25J
• Pyramidal head: edge length 60mm×60mm×60mm height 25±0.7mm

Additional Information:

• Item Code: BL-7917

Approx. Rs 1.55 Lakh / PieceGet Latest Price

Box compression tester is for the compression strength, crushing force and stacking ability of medium and small size packaging like corrugated carton.

Technical Feature

• LCD display, PVC operation manual, human design
• Microcomputer processing system, automatic measurement, test result intelligent judging, self-return
• Microcomputer data collecting and computing, microprinter
• Real-time display of compression resistance force, deformation and changing curve
• Three test modes of compression resistance, stacking and compression at fixed time and pressure
• Synchronous motor
  Accurate thread lead screw drive system

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Product Description:

Tensile Testing Machine with two column frame with a hand wheel operated lead screw is a perfect tool for tension, compression and flexural testing of springs, rubber, paper, film etc., with attachments. This machine is appreciated for their durability, accuracy of results and high tensile strength. It is a best Tensile Testing Machine having variety of applications.

Features:

• Table Top Model
• Digital Display of load and Elongation.
• Feather touch Key board operation.
• Tare Facility for force and displacement.
• Load display in Kg. Or Newton.

Approx. Rs 25,000 / PieceGet Latest Price

• PLC control and touch screen operation
• Real time display of test data, results and curves
• Both the static and kinetic coefficient of friction can be measured
• In accordance with multiple international standards
• Test results calculation, analysis and curve superposition
• VT232 output and professional software
• Microprint of easy printing of test result​

Approx. Rs 29,500 / PieceGet Latest Price

Our Fruit Firmness Tester 6003B (also known as a Fruit Pressure Tester) is a penetrometer that measures fruit firmness uptil 5kg and provides a quick, easy and, according to university studies, accurate method to determine fruit maturity.

Approx. Rs 1.85 Lakh / PieceGet Latest Price

Features:

• Four test modes of RCT, ECT, FCT and PAT available
• Microcomputer control, auto measuring and intelligent test result judgment, auto returning.
• Real time display of curve, data auto collecting, calculating,analysis, storage and printing.
• LCD display, PVC operation manual
• Synchronous motor drive for precise pressure output.

Technical data:

• Accuracy: ≤±1%
• Platen parallelism: ≤0.05mm
• Compression speed: 12.5±1mm/min

Additional Information:

• Item Code: HI8666

Approx. Rs 55,000 / PieceGet Latest Price

• LCD display, PVC operation manual, human design
• Microcomputer processing system, automatic measurement, test result intelligent judging, self-reture
• Microcomputer data collecting and computing, microprinter4. Real-time data display
• Three test modes of flat crush test(FCT), edge crush test(ECT), ring crush test(RCT)

• Accuracy:≤±1%
• Deformation measurement accuracy: ≤±1mm

Additional Information:

• Item Code: NI702

Approx. Rs 12,500 / PieceGet Latest Price

Aluminium foil flex failure tester Metalized film flex durability tester Principle

Flex Durability Tester​ Features

• PLC control and 7 inch touch screen operation
• 5 standard test modes and 4 test stations
• Long and short stroke fast switching
• Condition A,B,C,D and E can be chosen
• Micro printer(Optional)

Additional Information:

• Item Code: 833

Approx. Rs 49,500 / PieceGet Latest Price

• P.I.D. temperature control
• High precision timer
• Alarming function
• Stable heating of fluid medium
• Standard square metal clamp and free shrink holder

ISO 11501 Film Free Shrink Tester technical Specification

• Specimen Size : ≤160 mm x 160 mm
• Temperature Range : Room temperature ~ 200°C
• Accuracy: ±0.3°C

Approx. Rs 1.2 Lakh / PieceGet Latest Price

Flexometer is used for the assessment of the flexing endurance of light leathers and their surface finishes. The ability of light leathers such as those used in shoe uppers, gloves and garments to with stand repeated flexing without cracking can be accurately determined with NUNES Flexometer. This testing equipment is built on a rigid metallic base plate. The test specimen is held between a pair of stationary and oscillating grips. The grips are specially designed to enable quick fixing and removal of test specimen and are shaped to meet the specifications.

A six digit even electronic counter with key reset and backup memory is provided to count the total number of flexing cycles undergone by the test specimens. The equipment is able to carry out number of flex cycles per test.

Features:

• All the pivot points of the apparatus have ball bearing to ensure the long life and smooth operation
• The apparatus is finished in bright chrome/ zinc plating and NC based painting for a corrosion resistance finish
• Electronic counter with key reset and backup memory to count the total number of flexing cycles

Approx. Rs 19,500 / PieceGet Latest Price

• Reset : Automatic or Manual - Selectable
• Display : 4 digit, 2" Height
• Red LED Display
• Resolution : 1oC
• Accuracy : +2oC.
• Range : 1000 - 1800oC (500-1400oC for K type)
• Input : R,S, B or K Thermocouple - Selectable
• Measuring Principle : Plateau, Averaging or Peak - Selectable
• Clock : Time, internal,clock-battery backed.
• Compensation : Cold junction compensation automatic.
• Data Memory : Last 190 readings- battery backed-Printable with date and time.
• Outputs :

1. Temperature Result on 2" Ht 4 digit LED Display
2. Bright, Green, Amber and Red lamps for status indication with Hooter
3. 4 digit result in current loopat 220 Hz bit rate until reset.
4. parallel port for Printer
5. VT-232 for PC communication
6. 4-20 mA output until reset.

• Dimensions : 19" Rack Mounting (483 x 140 x 265mm)
• Cut out : 403 x 133(Optional Accessories)
• Wall or Floor-mounting MS Panel
• Remote Large Display Unit VT-02
• Remote Status Indicator Lamps
• 80 column Dot Matrix Printer
• Digital Calibration Unit
• Model VTC-0212 ft Lance, Compensating Cable
• Thermocouple Tips, Receptacles & Housing