Industrial Product

Approx. Rs 19,500 / PieceGet Latest Price

We are suppliers of Dial Type Barometer, Supported ourselves with experienced personnel, we are readily instrumental in providing an inclusive variety of Dial Type Barometer. Using optimal-class basic components altogether with hi-tech tools and machines, this presented products are broadly commended and treasured.

Barometers are for the measurement of atmospheric pressure and can be labeled into the category of weather Instruments. Weather instruments are designed to measure one or multiple components of weather including wind speed and direction, rain or snow fall, solar radiation, temperature, pressure and humidity.  In some cases, these instruments are designed for incorporation into a weather station arrangement and can be mounted on a pole or base and remotely monitored. In other cases, these are individual sensors or instruments that can measure one aspect of weather. In all cases, the instruments and sensors are designed for environmental type applications, and often housings are rugged for these and other applications.

Output options for weather instruments can include analog voltage, analog current, frequency or pulse signal and switch or alarm. These instruments can be connected to computers via serial, parallel, or other digital means for signal acquisition. Some models even have built-in modems and thus can act as event-triggered devices or can be programmed remotely in some cases. They can have local or remote analog, digital or video style displays. The user interfaces on weather instruments can be analog front panel type controls with switches, dials, potentiometers, etc.; digital interfaces with keypads, buttons and menus; or controlled by a remote computer with the same interfaces stated above.

Features:

• Accurate dimension
• Durable
• Rugged
• Perfect finish
• Easy to use
• Reliable

Approx. Rs 26,500 / PieceGet Latest Price

Approx. Rs 14,500 / PieceGet Latest Price

Salient Features:

• Sound Structure and easy to operate
• Large capacity
• Angle rotor head
• Timer
• Widely used for biology, chemistry, medical and educational applications

Approx. Rs 45,000 / PieceGet Latest Price

Falling Number is a device to test the Alpha Amylase activity in the flour or the grain. In this system certain amount of flour is taken and placed inside the viscometer tube. It is then mixed with distilled water and placed inside the system’s water-bath. The water-bath heats the sample upto 100 Deg C. This gelatinises the sample. After 5 seconds, the stirrer placed inside the viscometer goes up-and-down to create a stirring motion. After 55 seconds of stirring, the stirrer is dropped from the top position. The 5 seconds of gelatinisation process, the 55 seconds of stirring and the time the stirrer takes to reach from the top position to the bottom, in seconds is represented as Falling Number.

The ideal falling number for bread baking is at 250 to 350. Bastak, Turkey Falling Number model 5000 is an automatic system to measure the enzyme activity in flour and wheat. The FN model measures the natural Alpha Amylase enzyme and the FFN model measures the total (microbiological + natural) Alpha Amylase enzymes. Changing of one mode to another would take a flick of a button. This system also has bult-in Altitude.correction.

Approx. Rs 12,500 / PieceGet Latest Price

Rubber Hardness Tester Vtech made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is a minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish.

Technical Specification:

Max stroke: 200mm

Diameter of pressure needle: 1.25mm +/-0.15mm

End diameter of needle: 0.79mm +/-0.03mm

Pressure: 0.55N-8.06N

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 12,000 / PieceGet Latest Price

Model No.: VT-1414

Standards:

Specification:

Features :

• Compact and rugged for laboratory and small production units
• Designed for speed crushing
• Discharge opening adjustment range: 3 - 10mm
• Manganese steel jaws adjustable up to 6 mm opening
• 250 kg materials can be crushed in approx eight hours
• Supported with strong steel frame
• Voltage: 440 V, Three Phase A.C. Supply

Additional Information:

• Delivery Time: 1 week

Approx. Rs 10 Lakh / PieceGet Latest Price

V TECH manufactures two types of Laboratory mills and they are CD1 and CD2.

CD1:This mill simulates an industrial mill. It has a break part which passes the wheat between 3 grooved rollers twice. Then it sifts it through a centrifugal sifter. There is also a conversion part and the sample is made to pass through 2 smooth rollers by pressure. This mill comples with the ISO 27971 standard which describes the test milling methodology for the Alveograph tests.

CD2: This is the mill which produces semolina out of durum wheat. The CD2 has a breaking part passing between 3 grooved rollers and the sifting is done by a centrifugal sifters. The reduction side is again passed through 3 grooved rollers.

The above mills help the researchers or the millers to optimise and blend various types of wheats or to determine the extraction rate of a sample.

Performance

• Gradually reduces wheat to obtain an extraction rate equivalent to an industrial mill Equivalence

• A patented mill diagram specifically designed to obtain precise information on the behavior of the wheat being evaluated

• LabMill produces flour that is representative of the wheat being milled Compliance with the ISO 27971 standard

• Predefined protocol compliant with the ISO 27971:2008 standard in effect

Approx. Rs 9,500 / PieceGet Latest Price

• Pressure gauge with rubber protection
• Pressure gauge Diameter: 75mm
• Test pressure : max 21 bar / 300 psi
• 4 Adapters : M10x1.0mm M12x1.25mm M14x1.25mm M18X1.5mm
• Hose Overall length: 430mm
• Pressure tube length : 150mm
• Angled pressure tube length : 160mm
• Case Size : 265 x 210 x 65mm

• -This compression tester can be quickly set to your bike / car , then you can get accurate
• readings in valves , piston rings , cylinder bores or head gaskets .
• -Manometer with double graduation ( 0 to 300 psi , 0- 21 kg / cm 2 ) and with rubber
• protection to prevent scratches
• -Drain valve with full copper nickel plating, anti -oxidation and corrosion
• - M10 adapter is suitable for motorcycles, M12 M14 M18 adapters are suitable for car.

• 1 x compression tester of 0-21 bar and 0-300 psi
• 1 x Hose , length 430 mm
• 1 x Adapter M 10 x 1.0
• 1 x Adapter M 12 x 1,25
• 1 x Adapter M 14 x 1,25
• 1 x Adapter M 18 x 1,5
• 1 x pressure pipe with rubber attachment ( straight line)
• 1 x pressure pipe with rubber attachment ( Angled )
• 1 x Plastic Case (red)
• 1 x Instruction in English

Approx. Rs 12,500 / PieceGet Latest Price

Model No : VT-SR01

Parameter

Outer diameter: 138 mm

Inner diameter: 62mm

Power supply and output method

4-19 plates (optional)

Model No : VT-SR02

Parameter

Outer diameter: 140 mm

Inner diameter: 44mm

Power supply and output method

4-19 plates (optional)

Approx. Rs 28,950 / PieceGet Latest Price

Direct reading Specific Digital Gravity Balance provides a simple and quick mean to read directly the specific gravity of rubber and other elastomers. Thus reducing labour and eliminating calculations. The time taken to find out specific gravity of a sample is only about half a minute. The balance consists of a rigid scale with a specific gravity (SG) printed on standing vertically on a heavy base plate. To the centre point at the scale, through jewel bearings to minimize the friction, a balancing arm is pivoted. At one end of the arm, two stainless steel pins are hanging with yarns. One of the pins is attached to glass jar kept on the base. A guard is provided to avoid accidental falling of the jar during use. At the other and of the balancing arm a pointer is fixed which indicates the specific gravity of materials under test. A sliding weight is also provided for initial balancing of the sample of different weight a levelling of the base plate. Two models of balance, one with a range of specific gravity between 0.9 to 3.0'' the second with a range of specific gravity / between 0.2to2.0 are available. A sample of any shape weighing between 5 and 12g can be tested in the first model, that weighing between 3 and 5g can be tested in the second model, and that weighing between 1and 2g can be tested in the third made. In the case of the second and third model, the lower pin is quite heavy and also acts as a sinker. Also in these models, the glass jar is kept on the base of a frame, which can be slid up and down on a rod fixed to the base plate to cover the full range at specific gravity

Product Details:

SPECIFICATION:

Max Error: 0.1%

Overload protection: Up to 500gm.

Display: 16 char X 2 lines big LCD display with green backlight

Test Fixture: Powder coated Mild Steel for long life

Automatic calibration (through keypad for weigh scale): 250 ml Boil beaker

Power Required: 220 V AC, Single Phase, 50 H

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 9,500 / PieceGet Latest Price

Approx. Rs 11,500 / PieceGet Latest Price

Applications:

• For climbing, camping, and sailing with barometer
• Weather forecast
• Compass, thermometer, and mirror

Approx. Rs 80,000 / PieceGet Latest Price

Auto Karl Fischer Titrimeter which is a versatile, compact, rugged & easy to operate instrument to determine Moisture Contents in Liquids & Powders. The instrument comprises of two units i.e. Control Unit & Titration Unit. The Control Unit controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology. It has Display of Array of 10 LEDs in Line.

Titration Unit contains the magnetic stirring mechanism and the solenoid valve assembly. The cabinet is designed to serve as a titration stand. Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper and textile industries, petroleum refineries, chemical and fertilizer units etc.

Additional Information:

• Item Code: 810

Approx. Rs 25,000 / PieceGet Latest Price

The experiment hardware fits onto a Test Frame. Students rest a beam on up to three supports. The supports are movable, so students can arrange them in many different positions under the beam. Students use masses on weight hangers to load the beam. The each supports contain a load cell to measure vertical reactions. These connect to a Digital Force Display unit. Two of the load cells have sinking knife-edge supports, which students can either fix or allow to sink by a set displacement. The third support load cell allows students to either clamp the beam (encastré fixing) or rest the beam on a knife edge. The unique design of this equipment allows the load cell to resist the bending moment while accurately measuring the vertical reaction.

The manual provides details of the equipment including sample experiment results and also describes how to use the equipment and gives experiment procedures.

For extra ‘virtual’ experiments, company can supply the optional Software for use on a suitable computer. The virtual experiments simulate the tests you can perform with the hardware. They also extend the choice of tests beyond that available using only the hardware, for example: higher loads, uniform loads or different test specimens. This extends the student’s learning experience.

For automatic data acquisition of your experiment results, company can supply the optional Automatic Data Acquisition Unit. Supplied as standard with the Software that displays and logs your experiment results and gives the extra virtual experiments (optional).

Approx. Rs 45,000 / PieceGet Latest Price

Additional Information:

• Item Code: 718

Approx. Rs 13,000 / PieceGet Latest Price

• Magnification: 50x - 1500x
• Observation: Binocular inclined at 45° and Rotatable 360°
• Stand: A rigid & heavy stand
• Focusing: Coarse and fine focusing by conveniently placed separate knobs 1 div. 0. 002 mm
• Stage: Horizontal Mechanical stage 120 x 140 mm. with fine vernier graduation. Designed with convenient co - axial adjustment for slide manipulation through 50 x 70 mm
• Illumination: Built - in base 6 V - 20 W Halogen light source with unprecedented light condenser
• Condenser: Sub stage Abbe filter holder N. A. 1. 25 condenser with Iris diaphragm and swing out filter holder focus able by rack & pinion
• Nose Piece: Quadruple revolving nose piece with positive click stops
• Eye pieces: Wide field 10x & 15

Approx. Rs 13,000 / PieceGet Latest Price

We are a trustworthy and leading organization in the market, actively engaged in offering a wide collection of Bitumen Extractor to our clients.

Features:

• Precise results
• High performance

Additional Information:

• Item Code: SDT

Approx. Rs 25,000 / PieceGet Latest Price

Get the perfect view with enhanced features like image rotation and digital zoom. Besides the replaceable V Li-Ion battery, the micro CA-300 can also be powered with the included AC Adapter which is ideal for time consume.

• Classy design
• Durability
• Comfortable pistol-grip design
• large screen and rugged anodized aluminum camera head with four bright LEDs make it easy to detect and diagnose the unreachable areas

Videoscopes, a Borescope or  an endoscope are inspection tools that capture images from inside holes, bores or cavities. They are combination bundles of optical devices and light sources that can be used in normally inaccessible locations.  Images are displayed in real time, recorded onto tape, and/or stored digitally.  Videoscopes resemble fiberscopes in appearance and operation.  However, instead of deriving a fiber optic image from a bundle in the probe, videoscopes use a charged couple device (CCD) in the distal tip to capture the image and transmit it back as electronic pulses.  A connected CCU converts these pulses, into real time video images, which may be displayed on a monitor for viewing, in addition to storage.  Generally, videoscopes provide sharper and more detailed images than fiberscopes produce, and these images can be transmitted over greater distances with a low level of image degradation.

Videoscopes are available in a wide range of configurations, with many optional features that may allow for easier use and more clearly produced images.  Some of the more common configurations include the viewing angle of the device, its resolution, frame production rate, and video format and color output type.  Optional features include whether the device has a 2-way or 4-way articulating tip, or whether it can accommodate interchangeable tips; whether the tip can rotate or is fixed; is the entire device flexible or just its neck and tip; and the adjustability of the light source to provide brighter, higher resolution images without edge fading or hot spots. 

Video Scopes are widely used in medical fields, including cardiology, dentistry, and reproductive analysis. In industrial applications, videoscopes are often used for visual inspection of the internal surfaces, or inner diameter (I.D.) of tubes, piping, cylinders and castings, and for examination of engines and structures, and quality assurance testing. 

Video Scopes are also be found in security applications, most notably airport security. Other applications would include gun barrel inspection, Automotive and Diesel mechanics, HVAC Technicians, Electricians, Plumbers, Law Enforcement Inspectors, Welders, Carpenters and Architects. 

Pipe Inspection cameras are used to investigate areas in long tubes, or pipes at distances up to 100m away from the display screen.

Approx. Rs 2.3 Lakh / PieceGet Latest Price

The rotary bottle washing machine is compact and highly efficient machine with elegant look. This multifunctional multi featured machine meets the GMP requirements of washing for glass and plastic bottles. The machine operates on the rotary principle with "V TECH" mechanism and requires manual loading and unloading of bottles.
Operation :
The bottles are loaded on the subsequent indexing part of rotating platform and are cleaned in series of operations. Specially designed bottle holders provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means ensure saving of water, and sequence of various washing media to suit specific requirement.

Approx. Rs 2.4 Lakh / PieceGet Latest Price

Model VT 2002 series locator is used for locating buried lines pipes & other utilities. It comprises of a transmitter & receiver & operates on trusted & time proven electromagnetic method. It can locate the route & depth of buried cable/pipe. It can also identify target cable amongst bunch of cables using accessories.

TECHNICAL SPECIFICATIONS OF CABLE ROUTE TRACER MODEL TT 2002

Transmitter Technical Specification :

• Induction Mode 480Hz+/- 2Hz, 7.7Khz, 31Khz31 KHz
• Output wave shape Sine wave
• Power source 12VDC 4.5AH Battery
• Peak output power 10W
• Receiver Technical Specification :
• Router and Depth Mode 480Hz +/-2Hz, 7.7KHz, 31KHz
• Induction Mode 31KHz
• Power Source 12VDC 1.5AH Battery
• Power Loss < 1W
• Max Depth 3.0 Meters
• Depth Accuracy ± 10% upto 150 cm depth
• ± 15% for 150 to 300 cm depth
• Route Accuracy 30cm either side from the centre of the UG cable
• Operating Temperature. -1.5 Degree C ~ + 45 Degree C
• Storage Temperature -40 Degree C ~ + 70 Degree C

Additional Information:

• Item Code: 707

Approx. Rs 2.5 Lakh / PieceGet Latest Price

• Rigid construction
• Compact design
• Fine finish
• Cloud & pour point are indicators of the lowest temperature of utility for petroleum products. The sample is periodically examined while it is being cooled in the cloud & pour point apparatus. The highest temperature at which haziness is observed (cloud point) or the lowest temperature at which movement of the oil is observed (pour point) is reported as the test result. Single, Three, Four and Five test chambers.
• Individual built in CFC-free single / cascade refrigeration system with eco-friendly refrigerant.
• Individual digital temperature control system.
• Each compartment is designed to accommodate 4 test jars at a time. Each compartment is having 4 test jackets.

Approx. Rs 5,000 / PieceGet Latest Price

EMF meters detect and monitor harmful electric, magnetic or electromagnetic fields surrounding personal or work areas. Electromagnetic fields (EMF) are invisible lines of force produced by the voltage and current which surround electrical wires or devices. These physical fields consist of two components: the electric field, which is the result of the voltage; and the magnetic field, which is the result of the current flow. One of the most common places for EMFs is near power lines; however, EMFs may also occur near electrical appliances and office equipment. In terms of human health and safety, some research indicates that elevated levels of extremely low-frequency (ELF) EMFs may cause cancer and leukemia. Consequently, electrical workers and other maintenance personnel may use EMF meters before entering a job site.

EMF meters can combine magnetic, electric and radio frequency (RF) or microwave detection in a single package. Handheld devices vary in terms of measurement speed and cost, but are reliable instruments for detecting electromagnetic pollution. Specifications for EMF meters include measurement range, frequency bandwidth, percent accuracy, sampling rate, minimum resolution, number of axes, weight, dimensions, power requirements, and operating temperature. There are two measurement ranges for EMF meters: milliGaus (mG) and micro Tesla (microT). Most Gaussmeters have a measuring of range of 0.1 to 199.9 mG . Most Tesla meters have a range of 0.01 to 19.99 microT. Choices for frequency bandwidth include 30 to 300 Hz, 1 to 200 kHz, and 11 Hz at 3 db. Typically, percent accuracy is measured at 50/60 Hz.

EMF meters vary in terms of features and applications. Some products have audible, adjustable alarms that sound when an electromagnetic field is encountered. Others provide datalogging capabilities with a date/time stamp for field use. Devices that have an RS-232 or universal serial bus (USB) interface are also commonly available. In terms of applications, EMF meters can be used to identify AC magnetic fields, AC electric fields, and RF radiation. Specialized EMF meters can detect hidden sources of extremely low-frequency (ELF) radiation from computers, kitchen appliances, television sets, vacuum cleaners, electric can openers, hair dryers, and power tools. Magnetometers are used to measure the direction and/or intensity of magnetic fields.

The following has been reproduced from sales literature in the Lutron range :

SAFETY INSTRUCTIONS

  Danger

* For worker's safety, be aware that persons with

  electromagnetic implant ( e.g. cardiac-pacemarker ) are

  subject to special danger in some cases.

* Particular to observe the local safety regulations of the

  operator of the equipment.

* Before using the device, you need to know that how to

  Set the " alarm-limit " value.

  Attention

* Claims by some scientists that long term exposure to

  electromagnetic field may be the cause of childhood

  leukemia & other forms of cancer.

* Complete answers to any of these and related

  questions are not currently available. At the present

  time the most common practice is to avoid excess

  exposure over long periods of time.

* Complete answers to any of these and related

  " Prudent Avoidance " as stated by the Environmental

  Protection Agency(EPA) USA is recommended.

* According to ICNIRP of reference levels to time-varying

  electromagnetic fields, The E-field strength levels can be

  seen on the following leaflet:

Approx. Rs 21,000 / PieceGet Latest Price

Handles 75 lbs. continuously
• Recycled high density poly table top
• Extended height legs adjust for tabletop/storage/portability -- Legs extend from 20" - 25" as a floor model or the extensions can be removed to convert to a 13" tabletop model.
• Legs are now standard diameter brent legs that fit all Brent wheel attachments -- also powder coated for improved scratch and corrosion resistance. See "Wheel Accessories and Equipment".
• Electronic speed control with optional reversing switch -- features a neutral "safety" position to assure smooth transitions when changing direction. Neutral position allows the wheel head to spin freely in both directions to be used as a banding/decorating wheel.

Additional Information:

• Item Code: UR-4070

Approx. Rs 4 Lakh / PieceGet Latest Price

Approx. Rs 45,000 / PieceGet Latest Price

Holiday Detector offered provides for highly reliable usage where it supports identification of exact location of coating defects after coating cure stage. The superior detection support provided safeguards the coatings from possibility of early failure. Some of its features include product supports detection of crack, contaminant presence, thin spot, foreign inclusion in coating film; holiday detection equipment allows for accurate detection; the equipment is used for checking coating systems for critical service like immersion/chemical storage; coating applied to steel which it in contact with soil/wet conditions.

Approx. Rs 15,000 / PieceGet Latest Price

l No. personality cards / reference IC/IC data required.
l Automatic testing of ICs at 4.75V & 5.25V to locate marginally bad ICs.
l Continuous mode for testing ICs until Aborted. Number of times the test was successful if displayed.
l Step mode to locate faulty pin through discrete LEDs for find the number of unknown good digital IC with facility to locate its functional equivalents for ICs upto 20 pins
l Memory test for EPROM indicates non blank location address with data content. For RAMs bad location address is displayed.
l Buzzer to indicate bad IC,
l Separate field for display of mode of operation (ONE/CON/STP)
l Current drawn is displayed in s separate field for Good ICs.
l Backspace, clear and double digit entry keys for editing IC number
l Remembers IC Numbers for repeated testing of same IC.
l SELFTEST facility during power ON and through keyboard
l Potential free 20 pin and 40 pin ZIF (zero insertion force)
l Protection against wrong insertion of IC under test.

Approx. Rs 32,500 / PieceGet Latest Price

Toe Cap Impact Tester is made on a horizontal platform which has two guide bars which guide the impact weight. There is a mild steel plunger of specified dimensions which is used the intermediate parts between the impact weight and the toe cap. The plunger is freely supported by the toe cap. The base of the machine is placed on the hard wood of specified dimensions. A capsule for measuring the clearance at the time of maximum depression is also supplied with the instrument. All the parts are either painted or chrome platted to give the instrument a corrosion free long life.

TECHNICAL SPECIFICATION

Mass of Falling Block: 10.0 - 0.1 kg and 20.0 - 0.2 kg

Clamping Block: 150 x 150 x 19 mm, hardness at least 60 HRC

Impact Energy: 100 - 2 Joule and 200 - 4 Joule

Height of fall: 1020 - 10 mm

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 32,500 / PieceGet Latest Price

FEATURES

Accurate And Wide-Range Analysis

Multi-Stream Available

Fast Loop Reservoir

Adjustable Cycle And Calibration Frequency

Automatic Calibration And Validation (QA/QC)

Compact Design

Color Touchscreen Display

Grab Sample Capability

Internal Datalogger

Low Reagent Level Alarm

Automatic Start/Stop Based On Sample Flow Detection

Minimal Analyzer Maintenance

Approx. Rs 5,000 / PieceGet Latest Price

• Portable metal detector, convenient to take
• It can be recharged. It needs 4-6 hours for charging (standard 9V battery, the charger, and rechargeable battery are ordered additional)
• The alarm terms are sound and light alarm simultaneously, or vibration and light alarm simultaneously. You can choose the operating terms optionally
• When the low sensitivity on-off is pressed, the metal detector will only alarm when it finds big metal object Li battery, USB charge cable (for option)
• Battery saving function: Automatically power OFF after one minute if no use (for option)
• Security detecting: Prevent taking contraband, such as: knife, gun and so on
• Factory: Prevent the loss of valued objects Education area: Prevent taking cheat-tool, such as telephone, electronic dictionary, and so on.

• The prices given are indicative price and can differ depending upon the features and requirements.

Approx. Rs 20,100 / PieceGet Latest Price

Approx. Rs 9,500 / PieceGet Latest Price

Product Details:

Our premium quality range of Electrical Motor Tester is appreciated by our clients for its high efficiency and computerizes operation. We offer our complete range of Electrical Motor Tester suitable for small and large motors. Various kinds of standards tests in Electrical Motor Tester are dielectric strength, insulation resistance, and digital ohmmeter with delta T ground efficiency. In addition, these testers are also perfect for power measurements, detection of the number of turns, sense of rotation, and detection of noise level.

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 34,500 / PieceGet Latest Price

With the aid of latest technology, we are able to offer Pirani Vacuum Gauge that is available in digital as well analogue type. These gauges are designed with the provision for single & double gauge head and for set point controller with relay out put.

Salient Features:

• Sensor : Pirani type
• Measuring range : 0.5 mbar to 1x10(-3) mbar
• Compact panel mounting type
• Analogue out put : 0-200 mV
• Sense head connection : KF-10
• Dimension : 99WX98HX236D

Approx. Rs 3,500 / PieceGet Latest Price

Approx. Rs 1.2 Lakh / PieceGet Latest Price

• Test chamber in rectangular design, made of impact resistant eco-friendly polypropylene material,
• Integrated control unit,
• Manual dome opening,
• Closing pump for optimum setting for the salt solution to be sprayed
• Storage tank for approx. 125 l salt solution,
• The necessary regulating and control instruments for temperature monitoring in the test chamber, the temperature of the humidifier, the spray pressure and the duration of the test,
• 3 specimen holder for weathering panels.

The test apparatus ready for operation; design in accordance with technical Leaflet 606-Basic/E, to perform continuous corrosions tests in accordance with DIN EN ISO 9227, DIN EN ISO 6270-2, DIN 53 167, ASTM B 117, ASTM B 368 T "CASS TEST", DEF 1053 . 24, MIL-STD 202 B, PN X 41-002.

Approx. Rs 12,500 / PieceGet Latest Price

Additional Information:

• Item Code: HI-9828

Approx. Rs 43,500 / PieceGet Latest Price

Sole Adhesion Tester is used for the sole adhesion of the footwear. Digital model is also available. The system consists of a spring dynamometer to indicate the load applied at the junction of the sole and the upper, a lever arrangement to transmit the load exerted on the toe piece to the spring dynamometer, a straight edge fulcrum for resting the shoe on during the test, and a set of interchangeable toe pieces having different curvature. The spring dynamometer indicates the load applied on the joint directly in kilograms, taking into account the mechanical advantage of the lever transmitting the force from the toe piece to it. The load is indicated on a circular dial. The dynamometer has two pointers, a black powder to indicate the instantaneous load acting on the toe piece and a red dummy pointer to indicate the maximum load applied before failure of adhesion. The toe piece is five in number and having a different curvature to enable toes and heels of different shapes and sizes to be tested. The length of the arc of each toe piece, however, is the same to ensure that the load is applied only to a fixed length of joint. They are made from carbon steel for giving a long operational life. Any one of the toe pieces can be held in the equipment at one time. The fulcrum on which the shoe is placed during the test has an adjustable height to enable soles of different thickness to be tested. The height of the fulcrum is adjusted with the help of spacer strips provided with the instrument. The instrument is finished in painting and bright chrome plating to give it a corrosion resistant finish.

TECHNICAL SPECIFICATION

Load Range: 0 to 125 kg X 500 gm

Lever Ratio: 1:5

Curvatures of Toe Pieces: 25, 30, 35, 40 and 45 mm

Length of Contact Arc: 22 mm

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 1.2 Lakh / PieceGet Latest Price

For The First Time In India, Precitronic has introduced a Portable Digital Splice Yarn Strength Tester with Printer. This instrument is electrically powered and works on CRE (Constant Rate of Elongation) achieved by high precision LM Guide and stepping motor with microprocessor control. Easy to use, gives accurate strength and elongation of splice or yarn. One can take the instrument to the processing place such as spinning, winding, twisting etc. It also gives estimated RKM value of yarn. Salient Features: 1. Indigenously developed, affordable price and fast service 2. Upto 250 nos. of samples can be tested in a test. 3. Strength and Elongation are displayed following each test and can be printed in a mini dot matrix printer. 4. Large LCD Screen and user friendly menu. 5. THREE modes of testing is available 6. Data transfer facility can be provided on request Technical Data 7. Measuring Range. 8. Strength: 0 to 2000 gm. 9. Elongation : 0.5 to 20%. 10. Gauge Length : 250 mm. 11. Speed : upto 1000mm per minute. 12. Min. & Max. Strength and Elongation. 13. Average value , SD and CV%. 14. Gives force deviation % (between Parent and Spliced yarn). 15. Estimated RKM Value of Yarn. OPTIONAL 16. 12V x 2 Battery and charger 17. Instrument Trolley

Approx. Rs 70,000 / PieceGet Latest Price

Mini Whiteness Meter Wholeasale supplier,online Whiteness Meter Manufacturing, Trading,exporting,distributing, & Supplying of Various Whiteness Meter in Indian Railways Whiteness Meter for Linen,Whiteness Meter for paint,Whiteness Meter for pigment,Flour Whiteness Meter .We deal into Textile & Paint/Pigment Testing Instruments. For Textile our range includes Laboratory Dyeing Machines, Physical Testing Machines, Yarn & Fiber Testing Machines, Lab Consumables & Spares. For Paint & Pigment Industry we can supply the machines which are used to check Viscosity, Film Properties, Color, Gloss & Weathering Effect.
Our organization is committed to attain complete client satisfaction and has received a good response from our clients for our products. We also manufacture Textile Laboratory Machines as per the specific drawings given by our clients. 

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 63,000 / PieceGet Latest Price

Color sensors register items by contrast, true color, or translucent index. True color sensors are based on one of the color models, most commonly the RGB model (red, green, blue). A large percentage of the visible spectrum can be created using these three primary colors.

Many color sensors are able to detect more than one color for multiple color sorting applications. Depending on the sophistication of the sensor, it can be programmed to recognize only one color, or multiple color types or shades for sorting operations.

Some types of color sensors do not recognize colors, per se, instead focusing on light wavelengths. These devices can be configured to locate wavelengths from near infrared (colors in the 750 nm to 2500 nm wavelength range), far infrared (colors in the 6.00 to 15.00 micron wavelength range), and UV (colors in the 50 to 350 and 400 nm wavelength range), in addition to the visible range. Sensors that read the visible range are the most common type of color sensors. They measure color based on an RGB color model (red, green, blue). A large percentage of the visible spectrum (380 nm to 750 nm wavelength) can be created using these three colors.

Color sensors are generally used for two specific applications, true color recognition and color mark detection. Sensors used for true color recognition are required to "see" different colors or to distinguish between shades of a specific color. They can be used in either a sorting or matching mode. In sorting mode, output is activated when the object to be identified is close to the set color. In matching mode, output is activated when the object to be detected is identical (within tolerance) to the color stored in memory. Color mark detection sensors do not detect the color of the mark, rather they "see" differences or changes in the mark in contrast with other marks or backgrounds. They are sometimes referred to as contrast sensors.

Color sensors shine light onto the object to be monitored and measure either the direct reflection or the output into color components. Many color sensors have integral light sources to achieve the desired effect. These integral light sources include LEDs, lasers, fiber optic, and halogen lamps.

Additional Information:

• Delivery Time: 2-3 weeks

Approx. Rs 98,000 / PieceGet Latest Price

Surface Roughness measurements are expressed in terms of Ra, Rz or Tp where the values include peak-to-valley profile measurements in combination with assessments of the frequency of peaks within the area under test. Ra is commonly defined as the arithmetic average roughness.

A diamond stylus is moved across the sample and a piezoelectric pickup records all vertical movement. Peaks and valleys are recorded and converted into a known value of a given parameter.

These instruments are portable, hand held surface roughness testers and are economical, digital & easy to use. These surface roughness testers are a given necessity for any shop floor that receives work with Ra requirements.

These are commonly used in areas such as:

· Mechanical manufacturing industry.

Mostly used in the manufacture of metal. The primary function of roughness testers is testing the surface roughness of processed parts like the pot-ball roughness tester being perfect for testing hard surfaces such as in automobile parts manufacturing, mechanical parts manufacturing, The roughness tester is essential in every manufacturing industry engaged in quality of parts surface.

· Manufacturing industry of of non-metal types.

As the world develops in science and technology, more new materials are used in new manufacturing techniques, for example, pottery, plastic, polyethylene, etc. Nowadays some bearings are made in special pottery, and some pump valves are made in polyethylene. These materials are strong and some of them can be made into non metal parts. Their surface roughness also need testing in manufacture.

· Manufacture of mechanical parts and gearing.

Mechanical parts include bearing, fastening parts, pressing parts, bolts, gear and rack, cam, coupling, clutch, hydraulic units, reducers, micro-motors, timing motors, bearings, hydraulic units, sealing parts, gears in transmission and cranks need roughness testing. It is essential in the testing of inner and outer race of bearing, bearing ball, gear, crank which are all clearance-fit. Roughness testers are also used in some general parts, chain transmission setting, clinchers and connecting unit of transmission, such as washer, shaft, pin, key, expansion gear, buffer units, special spring etc. Roughness testing used in the electric motor is mainly for the testing of the surface of drivers, commutators etc,

Approx. Rs 77,280 / PieceGet Latest Price

Model No : VT-SDS01

Parameter

Resolution: 0.1h

Spectral range:0.3~3µm

Response time:<5s

Cable length: standard: 2.5m (can be

customized)

Measuring range:0~24h

Power consumption:1.8 mW

Power supply and output method

Power supply:

DC 5V/ DC 12V/DC 24V

Output signal:

Current:4-20mA;

Voltage: 0-1.8V/0-2.5V/0-5V;

Digital:RS232/RS485;

TTL level(frequency /Pulse width)