Temperature Measuring Instruments

Approx. Rs 15,000 / PieceGet Latest Price

Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber consists of anodized aluminium or S.S. and outer wall of M.S. sheet duly painted. The gap of 75m.m. between the outer and inner wall is filled with special grade glass wool to prevent thermal losses. A self cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout. The chamber temp. range from 5°C above ambient to 60°C is controlled by "JUMO"/"EGO" GERMAN Thermostat with an accuracy of ± 1°C. Humidity is controlled through an imported HUMIDISTAT, thus controlling the desired set humidity range from atmospheric humidity to 95% +3%.

INSIDE SIZE OF EACH CHAMBER ALUMINIUM S.S.(304 Grade)

(a) 455 m.m.(W) X 710 m.m. (H) X 455m.m. (D)

(b) 605 m.m. (W) X 605 m.m. (H) X 605 m.m. (D)

(c) 605m.m. (W) X 910 m.m. (H) X 605m.m. (D)

Approx. Rs 14,500 / PieceGet Latest Price

Our clients can avail from us a wide array of Relative Humidity and Air Temperature that is accurate and has stable RH sensor. It is combined with RH and temperature sensor along with replaceable sensing element and an air temperature sensor in a cylindrical louvered solar radiation shielded housing. Further, these provide ± 1% temperature accuracy and are available with fan aspirated psychometric (type VP1/TM1) with two thermistor sensors.

Approx. Rs 22,820 / PieceGet Latest Price

Wall Mount Carbon Dioxide (CO2) Monitor
come with Temperature and Humdity

Dimension: 390 x 292 x 43mm

Features:

• Simultaneous triple result, displaying CO2 level, temperature and humidity.
• Stable Non-Dispersive Infrared (NDIR) Sensor for CO2 detection.
• It has triple LCD Display and programmable alarms and built-in Non-Dispersive InfraRed (NDIR) sensor that provides long term stable monitoring.
• Can be mounted on the wall or a desk.
• Visible & Audible (80db) CO2 warning alarm when CO2 concentration exceeds the set limits.
• Selectable °C and °F.
• With Min/Max.
• Factory pre-calibrated and inspected for precision performance.
• Continuous monitoring.
• Large Triple Function LCD Display with digital readout.
• Professional-Grade testing tool.
• With CE Marking, passed the standards and had been approved by European Directives for health & safety.
• Perfect to be used to monitor air quality in schools, office buildings, greenhouses, factories, hotels, hospitals and anywhere that high levels of carbon dioxide are generated. 

Specifications:

• Measurement range: Carbon Dioxide Concentration: 0-9999PPM
• Temperature: -10℃~100℃
• Humidity: 0-99.9%RH
• Measurement precision: 
  • Carbon Dioxide Concentration: +/-70PPM +/-3% Reading
  • Temperature: +/- 0.6℃(Max +/- 1.5℃)
  • Humidity: +/- 3%
• Resolution:
  • Carbon Dioxide Concentration: 1PPM
  • Temperature: 0.1℃
  • Humidity: 0.1%RH
• Repeat ability: Response time: 10 senconds
• CO2 reading digit height: 75mm
• Temp/Rh reading digit height: 40mm
• Working condition: 0℃~50℃, 0%~90% non-condensing
• Storage condition: -30℃~70℃, 0%~90% non-condensing
• Work power: AC 220V converted to DC 9V 1A power adapter (Singapore Safety Mark)
• Maximum power consumption: 9V*350mA
• Product Size: approx. 390*292*43mm/15.35*11.49*1.69''
• Net weight: approx. 1420g

Approx. Rs 12,500 / PieceGet Latest Price

Additional Information:

• Item Code: WSL-2

Approx. Rs 2.49 Lakh / PieceGet Latest Price

• Aerodynamics
• Vibrations
• Aircraft structures
• Aircraft propulsion
• Computer systems & simulations
• FEM / CFD / AutoCAD

• Wind tunnels
• Smoke tunnel
• 3 Component force balance
• Hot wire anemometer
• 16 Channels pressure scanner
• Reynolds apparatus

• Stroboscope
• Whirling speed of shaft apparatus
• Logarithmic decrement measuring equipment
• Natural frequency measuring system

• Photo-elastic stress Analyzer bench
• Flow Analyzer bench
• Shear gauge
• Cantilever beam
• Shear centre of closed, open and I-structure

• Aero engine of hunter A/C & its components
• compressor Rise & Blade
• combustion Chambers
• Fuel Injectors
• Turbine, Propeller Setup

• Programming in C, C
• MATLAB simulation using simulink
• MATLAB Programming

• Highly specialized lab with Star CCM Software
• GAMBIT & FLUENTS Software
• The electronics and various other requirements are generally very expensive and are not easily available.

• RC Plane (Balsa Plane IC engine x 1)
• Motors (Brushless and Brushed)
• Esc (Brushless and Brushed)
• Servos

• 2 RC F-22 Raptors
• 2 Hovercrafts
• Repaired an old RC plane
• Repaired 4 water rockets

• The design of F-22 raptor was assembled and was made by a 5mm styro-foam sheets and were flight tested.

• The design was made using AutoCAD/CATIA software and then, was made using corrugated plastic and thermocol sheet and was tested and also was demonstrated in public

• The work of projects to be done is effectively distributed among all the members of the club so as to keep each member of the group active including from 1st-3rd years.
• Club also organized various competitions and workshops under it effectively, like
• Boomerang Workshop
• Glider making competition
• Para corner (parachute competition)
• The workshops and competitions were kept free of cost and club managed the funds for these events from RC Simulation.

Approx. Rs 12,500 / PieceGet Latest Price

Features:

• Direction arrows display the deviation to the horizontals or verticals
• Robust due to aluminum housing
• Automatic rotation of the measured values on the display when working overhead
• Acoustic signal at 0° and 90°
• Hold function to hold measurement results at the push of a button
• Copy function for copying inclines and transferring them to another position
• Slanted, easy-to-read display
• 2 vials enable use as a spirit level
• More carrying comfort and safety due to shoulder bag

Approx. Rs 13,500 / PieceGet Latest Price

• Voltage F Current: Selectable By A Push Bulton } Selectable By
• Source I Measure: Selectable By A Pu Sh Button Push Button
• Source: Millivolt I Volt I Current Are Adjustable By Means Of ''coarse'' & In ''source'' Mode

• 0-200mvdc I O-2vdc I 0-20 Vdc
• 0-200~dc I 0-2madc I 0-20 Maoc

• 0 To 0.05% :t 2 Digit For 200mvdc
• 0 To.l%:t 2 Digit For 2 Vdc & 20 Vdc
• 0 To.25% :t 2 Digit For Current Ranges

Approx. Rs 2.72 Lakh / PieceGet Latest Price

Model No : VT-PRS01 

Parameter

Resolution: 0.01mm

Acurracy: =± 4%

Power consumption: 10mA

Working temperature: - 40°C ~ 80°C

Power supply and output method

Power supply: 12V ~24VDC

Output: signal:

·       Rulse (OC)

·       Digital: RS232/RS485 

Approx. Rs 7,500 / PieceGet Latest Price

Features :

This sensor can be used to detect wall studs, metal pipes and electrical wires. It will remind you with sound signal and lighting when it detects wall studs, metal pipes and electrical wires. Designed according to the ergonomics principle, it is comfortable to use. Locates the edges of wood or metal studs up to 3/4 inch (20 mm) deep. Perfect tools for the home renovate and decorate.

Specification :

• Model: VT-SF78B
• Material: ABS
• Detection sensitivity (depth): up to 20mm
• LED light: Green and Red
• Power supply: 9V 6F22 battery (Not included)
• Size: 145 x 62 x 25mm

Approx. Rs 15,000 / PieceGet Latest Price

• 0-600.0·C for Fe/ConTIC (J type)
• 0-1200.0·C for CrlAI TIC (K type)
• -1OO.O·C to +400.0·C for PT-l00 RTD

• 0 to.25%: t2 digit for FelCon TIC IPT-l 00 RTD
• + to.25%: t2digitforCrlAiT/C upto l000OC
• + l%: t2digitabovel000·Cfor CrlAiTIC

• Selectable by a Push Button
• FelCon T/CICrlAIT/C Output adjustable by means of “Coarse” & “FINE” Potentiometer Only

• Measurement of External FelCon TIC, CrIAITIC, PT-l00 RTD in °c
• AUTOCJC: Provided for Thermocouple