Industrial Instruments

Approx. Rs 6,500 / PieceGet Latest Price

Application

Digital Earth Resistance Tester is designed to measure the resistance if earth used in power circuit, Telecommunications, Railway Electrification, Domestic and Industrial electrical installations. The tester measures directly the resistance of the earth and also measure the ground resistivity. The study, elegant and compact body makes the instrument portable, easy to use, Hand-held instrument.

Salient Features

Rugged ABS body

Easy to use hand held meter

Ni-cd Re- chargeable Cells

Facility as to make bench top type instrument

Confirms to ISS : 9223/1979

Four terminals (To measure earth resistance as well as speci???c soil resistivity)

Lo-Bat or indication appears on Display indicating that the indicating the the cells (batteries) have gone down, which can be recharged by connecting to 230V, 50 Hz AC mains supply through charging cord provided with the instrument

Technical Details

Display 3 1/2Digits, LCD 0% to 10% of the range +-3%

Accuracy 10% to 90% of the range +-1.5% 90% to 100% of the range +-3%

Dimensions (in mm) 172 x 98 x 38 (Approx.)

Weight 575 gm (Approx.)

Electrical Speci???cation

H. V. Test 2KV AC (rms) for 1 min. between electrical

circuit and containing case

Insulation Resistance

Test More than 25 Megohms at 500 V DC between

electrical circuit & containing case

Accessories

Standard Accessories Carrying Case Charging Cord

Optional Accessories (at extra cost)

· Instruction Manual

· 4 Nos. M. S. Spike (45 cm Length)

· 1 Nos. Hammer

· 4 Nos. Cable (50 feet)

· 1 No. Plier

· 1 Nos. Screwdriver, all in one canvas bag

Any other combination of ranges can also be made on specification requirement

Guarantee

Guaranteed for 12 (twelve) months against any manufacturing defects

Dual Ranges

0 - 20 - 200 OHM

0 - 10 - 1000 OHM

0 - 100 - 1000 OHM

0 - 5 - 500 OHM

0 - 10 - 100 OHM

Additional Information:

• Item Code: JDT-01

Approx. Rs 24,500 / PieceGet Latest Price

Table Top instrument for measurement of Digital Gauss Meter fields is using Hall Probes. It has two ranges 20 K Gauss. A built-in calibration facility ensures quick check of calibration. All the controls are mounted on the front panel and are clearly designed. An attractive plastic cabinet with carrying cum tilt bracket takes to make the instrument light in weight and portable. LED display gives a direct reading with 1 Gauss resolution on the 2 k range and 10 Gauss resolution on the 20 K range.

• The control unit consists of a constant generator, an amplifier and seven segments LED display.
• A constant current is made to pass through the Hall probe, which when placed in a magnetic field produces a voltage proportional to the magnetic field.
• This voltage is amplifier circuit and output is read on a digital panel meter calibrated in kilogauss.

• General purpose instrument for accurate flux density measurement on magnetic and electromagnetic components such as relays
• DC motors, magnets, loudspeakers, etc. Very useful for online production testing

• Battery operated Gaussmeter
• A.C. field Gaussmeter
• Low field Gaussmeter

Approx. Rs 19,500 / PieceGet Latest Price

Digital Ultrasonic Plate Thickness Gauge:

Civil Engineering:

• Bridges
• Communication Masts
• Cranes
• Highway Sign Gantries
• Lighting Columns
• Playground Equipment
• Railway Infrastructure

General Industry:

• Boiler Tube Inspection
• Condition Monitoring
• Measuring Thickness of large geometrically
• Pipe Wall Thickness Inspection
• Plant Maintenance work
• Safety Inspections.

Hatch Cover Testing and Door Leak Detection

• Test the weather/water tightness of cargo hatch covers or doors Test seals in cargo access areas,

Non Destructive Ultrasonic Equipment for Hazardous Environments:

• Chemical Plants
• Dry, dusty environments where ignition could occur
• Fuel Depots
• Grain processing plants
• Inside storage tanks
• Oil and Gas production
• Explosive atmospheres

Industrial Leak Detection:

• Compressed air or vacuum systems
• verify steam-pipe seals, seal integrity or fittings and condenser drains, search for faults in electrical insulation
• Motor and rail vehicles: test seals in cabins, doors, , check fuel injection in diesel engines Steam Traps,

Offshore Platforms – Ultrasonic Test Equipment:

• Decommissioning of oil platforms – thickness surveys
• Oil drilling platform maintenance
• Jetties and pontoon surveys

Oil & Gas Ultrasonic Pipeline Thickness:

• Oil & gas pipelines can suffer from internal corrosion leading to costly leaks and emergency repair work.

Road Tankers:

• Road Tankers are susceptible to corrosion from the inside
• Rope Access Inspection Equipment
• Bridges
• Communication Masts
• Cranes
• Offshore Structures
• Ships
• Storage Tanks

Shipping:

• Regular ship maintenance is crucial for shipping companies as only with frequent safety checks,

Storage Tanks - Corrosion Testing:

• Fuel Depot Tanks
• Domestic and Commercial LPG Tanks
• Propane Gas Cylinders
• Air Receiving Tanks
• Air Cylinders for Divers
• Water Storage Tanks
• Effluent Tanks.

Underwater Inspection:

• Bridges
• Caissons
• Canal Locks
• Hawser Sections and Shackles
• Jetties and Pontoons.
• Offshore rigs

Approx. Rs 79,500 / PieceGet Latest Price

Approx. Rs 35,950 / PieceGet Latest Price

Product Description

We are offering V-TECH Digital Ultrasonic Flow Meter to our clients.

Specification:

· High accuracy

· Linearity: better than 0.5%

· Repeatability: better than 0.2%

· Accuracy: better than +-1%

· Wide measuring range: Several types transducer for selection, pipe size from DN15mm to Dn6000mm Far transmission distance: Connecting module and secondary meter through RS-485 interface, transmission distance up to 1000m

· Powerful Functions:Current output: 4-20mA, one channel, can be used for flow/heat transmitter

· OCT output: two channels, can be used for flow /heat switch

· Current input: 4-20mA, three channels, can be used for data collector

· Tri-wire resistance signal input (PT100): two channels, can be used for calorimeter

Approx. Rs 15,500 / PieceGet Latest Price

Description:

Digital Shore Durometer Digital Hardness Tester Meter Shore A/Shore C/Shore D

A- type applies to general rubber, synthetic rubber, soft rubber, poly-resin, leather, wax, etc.

C-type applies to rubber and contains the tiny hole material that the vesicant is made in being used for plastic

D-type applies to general hard rubber, hard resin, acryl, glass, thermoplastics, printing plates, fibers, etc.

Features:

Holding measured display values.

Zero setting.

Specification:

Type Item No. Indentor shape Range Resolution

TypeA VT-10A Flat cone point (0.79 mm) 0-100HA 0.5HA

35º Included Angle

TypeC VT-10C 2.5mm Spherical 0-100HC 0.5HC

Sharp cone point (SR0.1mm)

TypeD VT-10D 30º Included Angle 0-100HD 0.5HD

Approx. Rs 30,000 / PieceGet Latest Price

Approx. Rs 24,500 / PieceGet Latest Price

Aiming at optimum client-satisfaction, we have been involved in offering a wide range of Digital ELCB Tester or Digital ELCB (RCD) Tester since our establishment. Offered product is designed with premier-grade components by our vendors. Offered is highly reliable for a prolonged service life and acclaimed by the clients fore their below mentioned features:

• Indicates tripping phase angle
• Over temperature shut-down
• Transient protection
• Two wires aperation / Line – earth
• Meter: Taut Band movement

Approx. Rs 8,500 / PieceGet Latest Price

Product Description

We are offering a wide spectrum of Testing Instruments such as Analog Insulation Tester that is extensively used for dependable testing of insulation in diverse industrial sectors. It features large analogue display and test leads and other accessories packed in a durable carry case. It is sturdy in terms of construction and made from the best grade of components that are procured from reliable vendors. It can be availed at reasonable rates.

Features:

·         Lightweight construction

·         Portable

·         Easy to operate

Specifications:

·         Output Voltage Range: AC 0.3~5.00KV

·         Output Voltage Resolving: 10V

·         Output Voltage Accuracy: ±(2%+3bits)

Approx. Rs 24,500 / PieceGet Latest Price

• Common applications include checking for Nitrogen purity
• Oxygen adequacy before man entry Oxygen level where investigation is required for safety
• Oxygen level in exhaust for combustion efficiency Oxygen purity Medical Oxygen percentage

• Low battery Indication: BAT on the display
• Accuracy: 1% of range 1 digit at constant temperature and pressure
• Response time of the instrument: 95% in 20 seconds
• Open sensor indication: Display will read
• 1 Sensor element: Electrochemical cell
• Life of cell (expected): 1 year
• Gas sample temperature: 0^oC to 40^oC

Approx. Rs 98,000 / PieceGet Latest Price

Model No : VT-UWDS01 

Parameter

Wind speed

Measuring range:0~40 m/s

Accuracy: low:±0.5m/s, high:±1m/s

Resolution:0.01m/s

Wind direction

Measuring range:0~360°

Accuracy:  low:±3°, high:±5°

Resolution:1°

Protection level:IP65

Shell Material:Engineering plastic

Power supply and output method

Power supply:

DC12V

Output signal:

RS485 

Approx. Rs 14,000 / PieceGet Latest Price

Model No : VT-WSDS02 

Parameter

Cable: ¿¿¿Standard: 2.5m ¿¿¿Other  

Material: carbon fiber

Measurement range: ¿¿¿0~45m/s   ¿¿¿0~70m/s

Accuracy: ±(0.3+0.03V) m/s(V: real-time

wind speed)

Resolution: 0.1m/s

Starting wind speed:=0.5m/s

Cable: Standard: 0.8m ¿¿¿Other 

Operating environment:

Temperature -35°C~60°C

Humidity=100%RH, No condensation                                                                                                                                                   

Defend grade: IP64

Power supply and output method

Power supply:

¿¿¿DC5V  ¿¿¿DC9-30V

Output signal:

·       Pulse signal (¿¿¿NPNR ¿¿¿PNP)

·       Current: 4~20mA;0-20mA

·       Voltage: 0~5V; 1~5V; 0~2.5V

·       Digital: RS232/RS485 

 _______________________

Model No : VT-WSDS01 

Parameter

Material: carbon fiber

WInd speed:

Measurement range: ¿¿¿0~45m/s   ¿¿¿0~70m/s

Accuracy: ±(0.3+0.03V) m/s(V: real-time

wind speed)

Resolution: 0.1m/s

Starting wind speed: =0.5m/s

Wind direction:

Measurement range: 0-359°

Accuracy: ± 3°

Resolution: 1°

Starting wind speed:=0.5m/s

Power supply and output method

Power supply:

DC 5V /DC 12V /DC 24V

Output signal:

·       Pulse (for wind speed sensor)

·       Current: 4~20mA

·       Voltage: 0~5V/ 1~5V/ 0~2.5V

·       Digital: RS232/RS485 

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 25,760 / PieceGet Latest Price

Model No : VT-WDS01

Parameter

Material: Carbon Fiber

Measurement range: 0~359°

Accuracy: ±3°

Resolution: 1°

Starting wind speed: =0.5m/s

Cable: □Standard: 2.5m Other 

Operating environment:

Temperature -20°C~60°C ;

Humidity=100%RH, No condensation

Defend grade: IP54

Power supply and output method

Power supply:

DC 5V /DC 12V /DC 24V

Output signal:

          Current: 4~20mA

          Voltage: 0~5V/ 1~5V/ 0~2.5V

          Digital: RS232/RS485 

Model No : VT-WDS02

Parameter

Material: carbon fiber

Measurement range: □8 directions   □0-360°

Accuracy: ± 3°

Resolution: 1°

Starting wind speed:=0.5m/s

Cable: □Standard: 0.8m Other 

Operating environment:

Temperature -35°C~60°C

Humidity=100%RH, No condensation                                                                                                                                                   

Defend grade: IP64

Power supply and output method

Power supply:

DC5V  DC9-30V

Output signal:

Current: 4~20mA;0-20mA

Voltage: 0~5V; 1~5V; 0~2.5V

Digital: RS232/RS485 

Approx. Rs 7,500 / PieceGet Latest Price

LCR meters and impedance meters measures inductance (L), capacitance (C), and resistance or impedance (R). Instruments used for LCR measurements are built as universal and multifunctional devices. They enable automatic (triggered or cyclic) measurements of L, C, and R as well as other parameters such as quality and dissipation factors. Instrument type, measurement specifications, test signal or source characteristics, and other measurements are important parameters to consider when searching for LCR meters and impedance meters. Additional specifications that are important to consider include user interface options, display options, additional output options, general features and functionality and environmental parameters.

Instrument types include hand held, portable, and fixtured or permanent. General measurements that are important to consider when searching for LCR meters and impedance meters include resistance or impedance range and accuracy, capacitance measurement range and accuracy, and inductance measurement range and accuracy. Resistance or impedance is the opposition that a device or material offers to the flow of current, equal to the voltage drop across the element divided by the current through the element. Also known as electrical resistance. Also called impedance, parameters are Z or Rac. A capacitor is a system of two conducting electrodes, having equal and opposite charges separated by a dielectric. The capacitance, C, of this system is equal to the ratio of the absolute value of the charge, q, to the absolute value of the voltage between bodies as: C= q/v.The unit of capacitance, the farad, is a large unit; practical capacitors have capacitances in microfarads, nanofarads and picofarads. Self-inductance is defined as the relation between current (i) flowing through the coil and voltage (v) measured at its terminals. Also the property of an electric circuit or of two neighboring circuits whereby an electromotive force is generated in one circuit by a change of current in itself or in the other. One Henry (1 H) is the inductance of a circuit in which as electromotive force of one volt (1 V) is induced, when the current in the circuit changes uniformly by one ampere (1 A) per second (1 s).

Test signal or source characteristics that are important to consider when specifying LCR meters and impedance meters include basic accuracy, number of digits displayed, number of steps, test signal or frequency range, and response time. Basic accuracy is the typical value at 1 kHz. The number of digits displayed refers to the number of digits on the readout. Number of steps in the measurement is important to consider. The test signal frequency range is the frequency range at which the instrument operates. Response time is the amount of time it takes for the LCR meters and impedance meters to make and display measurements.

• Type of Product : Digital Lcr Meter
• Display : 3½ Digit
• Inductance Range : 2mH /20 mH /200mH /2H/20H
• Capacitance Range : 2nF/20nF/200nF/2uF/20uF/200uF/1000uF
• Dimensions : 189 x 97 x 35 mm
• Type of Product Digital Lcr Meter
• Display 3½
• Digit Inductance Range 2mH /20 mH /200mH /2H/20H
• Capacitance Range 2nF/20nF/200nF/2uF/20uF/200uF/1000uF
• Dimensions 189 x 97 x 35 mm
• Weight 380 g
• Model No DLM-4070
• Resistance Range (Ohm) 200 /2K/20K/200K/2M/20M Ohms

Approx. Rs 1.15 Lakh / PieceGet Latest Price

It has been designed to test the endurance of coated material, when impacted by a

falling weight at specified points. The purpose of the test is to see if test specimens

can resist the effect of rapid impact testing

Features

• Impact Needle : 12.7mm?x 100mm height

• Falling Height : 500mm & 1,000mm ( Increment 50mm )

• Falling Weight : 300g, 500g & 1,000g

• Dimensions : 840 mm x 500 mm x 350 mm

• Weight : 40kg

Options

• Impact Needles/Impact Cavity : R1/16”, R1/8”, R3/16”, R1/4”, R1/2

Approx. Rs 60,000 / PieceGet Latest Price

• Motorized cutting drive
• Adjustable cutting window for precise sectioning of delicate specimen
• Easy switching between fine and trim sectioning
• Section thickness range from 1 µm to 500 µm
• 5 sectioning modes: manual, continuous, single, step stroke, permanent

Approx. Rs 21,000 / PieceGet Latest Price

Approx. Rs 19,500 / PieceGet Latest Price

We manufacture and supply premium quality Hectoliter Weight Apparatus that is widely used in agro processing units for determination of per hectoliter of food grains. The high performance and long life of our Apparatus makes us the topnotch Hectoliter Weight Apparatus manufacturers and suppliers from Ambala Cantt, Haryana.

• For determination per hectolitre of food grains

• Prefilling Hopper
• Filling Hopper
• Measuring Container
• Piston
• Straight edge
• Base with Leveling Screws

• 1 Litre

Additional Information:

• Item Code: EMF-822A

Approx. Rs 28,500 / PieceGet Latest Price

We are offering Mechanical Push Pull Gauge Force Gauge Meter Tester to our clients.

Other Details:

• Compact, simple operation handheld products, and installation of various test bench use.
• Combined with a variety of fixtures to facilitate testing of various products.
• Pointer, easy reading, high precision.

Applications:

• Electrical
• Packaging
• Automotive
• Food processing

Approx. Rs 4,500 / PieceGet Latest Price

Top made of cast iron & body of M.S powder coated. Maximum Surface Temp 350 Deg C

Additional Information:

• Item Code: YC-60

Approx. Rs 39,500 / PieceGet Latest Price

Approx. Rs 4,500 / PieceGet Latest Price

We have gained expertise in providing our clients with a comprehensive range of Verniercalipers that are widely

appreciated by the clients due to their durability, reliability, easy handling and low maintenance. All our products are sourced from the reliable and certified vendors of the market, who manufacture these using high grade material to ensure international quality

standards & norms. Moreover, our products are stringently checked and tested on several parameters to ensure

flawlessness.

Features:

· With no annoying Origin restoration necessary, a measurement can be started any time & there is no restriction on operating speed

· IP 67 protection assures waterproof reliability

Technical Data:

· Accuracy: +0.02mm (excluding quantizing error)

· Resolution: 0.01mm or 0.0005”/0.01mm

· Repeatability:0.01 mm

· Length standard: ABSOLUTE electromagnetic induction linear encoder.

· Max. response speed: Unlimite

· Battery: Solar battery

Range

6"/150mm

8"/200mm

12"/300mm

18"/450mm

24"/600mm

40"/1000mm

Approx. Rs 69,500 / PieceGet Latest Price

Drop Tester equipment is very useful to ascertain the transport worthiness of corrugated and solid fiberboard boxes and shipping container. Supplied with angular drop arrangement to ascertain the transport worthiness of the package from all angles. The machine is as per IS:7028 (Part IV)-1973.Power:50 Hz

Approx. Rs 35,000 / PieceGet Latest Price

Approx. Rs 17,500 / PieceGet Latest Price

Product Description:

Being a leading enterprise of this industry, we are offering a huge range of Analog Transformer Turn Ratio Meter.

Other details:

· Transformer Turn Ratio Meter is designed for measuring actual turn ratio of power and distribution transformers

· The instrument uses null balancing method for measurement to achieve high accuracy

· The instrument is overload and short circuit protected electronically

· A current meter is provided to indicate the exciting current, taken by the transformer under test

· A voltmeter is provided to indicate the excitation voltage given to LT winding of transformer under test

· The instrument is supplied in wooden cabinet kept inside a leather carrying case along with a soldier carrying strap

· The instrument is of heavy duty class, rated for continuous use

· The unit is designed to work satisfactorily in normal climatic conditions of India

Approx. Rs 69,500 / PieceGet Latest Price

The Ultimate Cable Fault Locator for open/short Faults

Application

Open Conductor Faults

Open Metal Sheet Faults

Low Impedance Sheath Faults

Wet Section Cable Faults

Short Conductor Faults

Product Description

Portable Cable Fault Locator Model 9555 is basically a Pulse Echo Meter (TDR) &

It can locate break, short (loop) Faults in underground copper cable. The

distance to fault is displayed directly in meters and there are no calculations

involved. It’s simple design, ease of operation & light-weight makes it an ideal

tool for even an inexperienced person to locate the faults.

Product Feature

Operation of Andig 9555 is simple. The power of keypad operation combined

with flexibility of menu system provide the operator with versatility and quick

fault location.

Quicky scans the

Technical Specications

Width 265 mm

Depth 140 mm

Height 195 mm

Weight 3.0 Kgs.

Physical Dimension

Power

Battery Internal, rechargeable Li-Ion Battery

Charging Source External 16V DC, 1A Adaptor

Operating Time 8 Hours Continuous without Back light

Environment

Operating Temperature : 0 to 50C.

Display

240 x 128 dot-matrix Graphic, Liquid Crystal Display

(LCD) with back light.

Pulse Echo Mode

Max. Duration 100ns to 2000ns in four steps.

Pulse Amplitude 12V +/- 20%

Output Connector 2 Pairs of sockets (L1&L2)

Max. Range 5 Kms.

V.O.P. fixed for standard cables or User programmable

Accuracy Better than 1% of reading

Waveform Display Mode Line 1, Line 2, Line 1 & Line 2

Environment

Operating Temperature : 0 to 50C.

Display

240 x 128 dot-matrix Graphic, Liquid Crystal Display

(LCD) with back light.

Standard : Battery, Adaptor, Operation manual,

connectors, Carry Bag

Cable Height Meter  can measure the height of suspended cable up to a height of 23 metres

Calibrators for Current 4-20mA, Voltage, RTD’s,  Temperature, Frequency, Sound, Thermocouples, Resistance and others.

Thermocouples & RTD Simulators.

Thermocouple simulators and RTD simulators provide precise standard values of resistance or voltage for simulation and calibration. Thermocouples are bimetallic temperature probes used in a variety of temperature sensing applications. Resistance temperature detectors (RTDs) are wire windings or other thin-film serpentines that exhibit changes in resistance with changes in temperature. RTD simulators provide a resistance value simulating the output of a resistance temperature detector (RTD) at a particular temperature. In some cases, resistance decade boxes can be used as RTD simulators. Thermocouple simulators provide a voltage value simulating the millivolt (mV) drop output of a thermocouple at a particular temperature. Some voltage sources can be used as thermocouple simulators. 

Approx. Rs 6,600 / PieceGet Latest Price

• Fast and accurate verification with type AA, A-C, C-A, and C - C connectors.
• Check disorder, short, open and cross status of HDMI cables.
• Mapping continuity and proper configuration.
• 19 pins and grounded connection and 4 status LEDs.
• Capable of checking wiremap only with the master unit.
• Adjustable test modes: Fast/slow scan/manual test for step by step.
• Design with loopback function
• Low battery indication
• Beeper indication

• Cables versions support: HDMI cables with type A & C connectors conforming to 1.0, 1.1, 1.2, 1. 2a, 1.3, 1.3a, 1.3b, 1.4, 1.4a, Category 1 and category 2 HDMI cables.
• Support test: 19 pin to pin wiremap and shielding detection.
• Test interface of master unit: HDMI ( type A) x 2, Mini HDMI (type A ) x1.
• Test mode: Fast / slow scan / step by step.
• Status Display: 19 beds and shield led on both master and remote unit
• 4 leads (pass, open, short, cross)
• Operating: 0 to 40???< 80% RH
• Storage: -10 to 50???<70%RH

Additional Information:

• Item Code: NI-98308

Approx. Rs 24,500 / PieceGet Latest Price

General Information:

• The coating thickness gauges work either on the magnetic induction principle or on the eddy current principle, depending on the type of probe used
• You can select the type of probe via MENU system, or it will work automatically

The gauges conform to the following industrial standards:

• GB/T 4956-1985
• GB/T 4957-1985
• JB-T 8393-1996
• JJG 889-95
• JJG 818-93

Features:

• Measured coatings: Non-magnetic coatings(e.g. paint, zinc) on steel, Insulating coatings (e.g. paint, anodizing coatings) no non –ferrous metals
• Operating with MENU easily
• Two measuring modes: Continue and Single mode
• One point calibrating and two points Calibrating independently for each working mode
• Zero calibrating easily
• Delete single readings and all group readings easily
• High alarm and Low alarm for all working mode
• Low battery, error indication
• USB interface for PC analysis software
• Disable Auto-power-off function via MENU setting

Description of the gauge:

• For measurement on steel substrates, the gauge works on the magnetic induction principle, for measurement on non-ferrous metal substrates, it works on the eddy current principle
• Measurement values and user information are shown on LCD
• A display back ensures easy reading of screen date in dark conditions
• Two different operating modes are available: Direct Mode and Group mode
• Direct mode is recommended for simple, quick, occasional measurements. It provides statistical analysis
• Single values are not saved. The statistical analysis program can evaluate 80 readings
• Group mode permits measurement and storage of readings in a free programmable memory. A maximum of 400 readings and 4 series of measurements can be analyzed according to various statistical criteria

Standard Accessories:

• Gauge with two 1.5 V battery, plastics carrying case, operating instructions (English), steel and aluminum substrate
• USB connecting cable
• Program disc for Windows 98/2000/xp/Vista/7

Probe:

• The Probe systems are spring-mounted in the probe sleeve
• This ensures safe and stable positioning of the probe and constant contact pressure
• A V-groove in the sleeve of the probes facilitates reliable readings on small cylindrical parts
• The hemispherical tip of the probe is made of hard and durable material

• Thickness gauges are used to make precise dimensional cross section measurements on a wide variety of coatings and materials including steel, plastic, glass, rubber, ceramics, paint, electroplated layers, enamels, pavement, multi-layer deposits, etc.  There are many mechanical, nondestructive and destructive techniques available to accomplish this task: IR or nuclear gauges, eddy current, magnetic particle, laser, ultrasonic, coulometric, and X-ray, are only a few of the many techniques.

  Beta, IR or nuclear gauge testing involves the absorption of x-ray, infrared or Beta particle radiation to measure the thickness of materials or coatings.  On nonmetallic materials such as paper or plastic films or webs, radiation is transmitted through the material and a radiation or Geiger-Muller detector is located on the other side to measure radiation levels.  On coated metallic materials, the radiation or Geiger-Muller detector is located on the same side and backscattered radiation is measured.

  Coulometric instruments use an electrochemical process to etch away a plated or metallic layer at a predetermined rate.  The amount of time to remove the plated layer provides an indication of coating thickness.  

Approx. Rs 8 Lakh / PieceGet Latest Price

• Small, hand-held, portable, and easy to operate.
• No Radioactive Source.
• Tube-based system eliminates costly resourcing and loss of speed.
• Multi-element Analysis - in one measurement.
• Definitive Pos./Neg. Classifications.
• No isotope licensing or travel restrictions.
• Ergonomic, lightweight design.
• Versatile PDA platform.
• Easily measures uneven surfaces.

Additional Information:

• Delivery Time: 2-3 weeks

Approx. Rs 75,000 / PieceGet Latest Price

TECHNICAL SPECIFICATIONS
_{Stack Temperature Range  : Ambient to 600 deg C read on a Digital Pyrometer.}

_{Stack Velocity Range : 3 to 60 m/sec}

  _{Thermocouple: T/C sensor in SS 304 casing, length of      insertion: 1 m with 2m long cable.}

_{Manometer                  : Digital with 0-1300 mm of H2O range}

_{Pitot Tube                   : Calibrated S-type fabricated -SS 304, 1m long}

_{Particulate Sampling   : 0 -60  lpm collection on thimble type filter up to 0.3 micron rating.}

_{Gaseous Sampling       : 0 - 3 lpm collection in a set of Borosilicate glass impingers.}

_{Rotameter                   : Acrylic body with 5% FSD accuracy, 0 - 30 lpm for PM and 0-3 lpm for GAS.}

_{Sampling Probe           : 1m long SS tube with inside lining of Teflon & provision for controlled at 120 deg C heating.}

_{Filter Holder               : Glass filter holder with heating provision suitable to hold either cellulose filteration}

_{thimble (size 28mm lD X 100mm long) or glass fibre thimble (size 19mm lD X 90mm long). Nozzles           : A set of  3 glass nozzles.}

_{Digital Clock               : 0-60 minutes, 1 second readout with start and stop switches.}

_{Temp. Controller         : Digital type temperature controller.}

_{Dry Gas Meter            : Range 0 to 40 LPM connected to SPM line.}

_{Sampling Train            : 3 Nos. of 240 ml cap glass impinger, 1 No. condenser glass coil, 1 No. moisture bottle 400 ml & 1 No. cartridge tube accommodated in separate ice tray with instrument panel with a provision to cool down flue gas temperature.}

Approx. Rs 34,500 / PieceGet Latest Price

V TECH  VT-800 Wifi temperature logger is a two-channel temperature and relative humidity data logger based on the Internet of Things technology. All data recorded is transmitted via Wi-Fi network infrastructure. There is no communication fee, thereby, reducing operational costs and fees. With this technology, users can view, manage and monitor data from V TECH  Wi-Fi temperature logger in real-time. It allows for offline logging and online synchronization to ensure data safety and accuracy. They can access up-to-date data via a smart-phone app or browser. 

Approx. Rs 48,720 / PieceGet Latest Price

Model No : VT-ULT01 

Parameter

Max  measure  range:  5m,  7m,  10m,  12m,15m (optional)

Detect blind area: =300-800mm

Detect  accuracy:  ±  0.5%F.S  (0.25%F.S  orother can be customized)

Beam angle: 9°,12°,15°(optional),

Display: none

Operation temperature: 0~50°C

Material: plastics

Protection level: Sensor IP65(requested no tounscrew the water proof connector)

Power supply and output method

Operation power:

DC24V/300mA,or DC12V/300mA

Output signal:

·       Pulse signal

·       Current: 4~20mA;0-20mA

·       Voltage: 0~5V; 1~5V;

·       Digital: RS232/RS485 

Approx. Rs 7,280 / PieceGet Latest Price

Model No : VT-PWL01

Parameter

Static current: 2.8mA ±0.1mA

Working pressure: 0~100Kpa(gauge

pressure, optional)

Working temperature: -20~65°C

Storage temperature: -40~125°C

Accuracy: ±0.5% (0-55°C)%FS

Response time: =2.0ms

Power supply and output method

Working voltage: 5.0 VDC

Output voltage: 0.5~4.5 VDC

Approx. Rs 36,960 / PieceGet Latest Price

Model No : VT-SHS01

Parameter

Temperature  measurement  range: -45°C-115°C;

Temperature accuracy: ±0.5°C; 

Moisture measurement range: 0-100%;

Moisture accuracy: ± 3% in the 0-53% range;

± 5% in the range of 53-100%;

EC range: 0-10000us/cm;

EC resolution: 10us/cm;

Protection level: IP68;

Power supply and output method

Power suppply:

12-24V DC;

Output signal: RS485

Approx. Rs 13,440 / PieceGet Latest Price

Model No : VT-SRS01

Parameter

Material:ABS

Cable length: 0.5m (standard)

Dimension: 89*60*38mm

IP Grade: IP68

Normal working power: 0.4W

Operating power during heating: 2.4W (the

heating function is optional)

Heating startup environment temperature:

<15 (default value)

The maximum heating temperature: 40°C

(default value)

Storage Condition: -40°C~+80°C

Power supply and output method

Power supply: 10-30VDC

Output signal: Relay (NO/NC); RS485 (need to buy a extra USB to

RS485 module)

Approx. Rs 22,000 / PieceGet Latest Price

          We have cut corner in the business by offering a gigantic evaluation exhibit of Benzene Sampler for deciding the benzene content in mass material specimens. The offered Benzene Sampler is manufactured utilizing quality tried crude material and complex innovation by our accomplished experts. To ensure quality, this product is sternly kept an eye on different parameters. Customers can benefit Benzene Sampler from us in different details according to their prerequisites.

Features:

·         Precisely engineered

·         Simple operation

·         High functionality

·         Strong construction

Approx. Rs 23,000 / PieceGet Latest Price

Specifications:

· Battery operated pump for a full of 8 hrs

· Rechargeable Maintenance Free Battery

· Provision for system to operated for the main also

· Suction Pump: Diaphragm Type

· Sampling Rate: 0.5 - 1LPM

· Rotameter: 0-3 lpm with Needle Valves to control flow

· Digital Timer: 3 digit display in minutes with provision of display of total run Time & delay time

· Battery: Rechargeable maintenance free battery

· Running Time: 1-999Min

· Delay Time: 1-99 Mint

· Operation Time: 8 hours with full charge

· Charge time: 15 hours or less

· Sampling Train: Consisting of 2 nos.,35 ml glass impinge kept in ice tray Connected with inert silicone tubing

· Power Supply: 220v ( /-)10 V AC, 50Hs with Battery charger & rechargeable Battery (4AH)

Approx. Rs 98,000 / PieceGet Latest Price

TECHNICAL SPECIFICATIONS
_{Stack Temperature Range : Ambient to 600 deg C read on a Digital Pyrometer.}

_{Stack Velocity Range : 3 to 60 m/sec}

_{Thermocouple: T/C sensor in SS 304 casing, length of insertion: 1 m with 2m long cable.}

_{Manometer : Digital with 0-1300 mm of H2O range}

_{Pitot Tube : Calibrated S-type fabricated -SS 304, 1m long}

_{Particulate Sampling : 0 -60 lpm collection on thimble type filter up to 0.3 micron rating.}

_{Gaseous Sampling : 0 - 3 lpm collection in a set of Borosilicate glass impingers.}

_{Rotameter : Acrylic body with 5% FSD accuracy, 0 - 30 lpm for PM and 0-3 lpm for GAS.}

_{Sampling Probe : 1m long SS tube with inside lining of Teflon & provision for controlled at 120 deg C heating.}

_{Filter Holder : Glass filter holder with heating provision suitable to hold either cellulose filteration}

_{thimble (size 28mm lD X 100mm long) or glass fibre thimble (size 19mm lD X 90mm long). Nozzles : A set of 3 glass nozzles.}

_{Digital Clock : 0-60 minutes, 1 second readout with start and stop switches.}

_{Temp. Controller : Digital type temperature controller.}

_{Dry Gas Meter : Range 0 to 40 LPM connected to SPM line.}

_{Sampling Train : 3 Nos. of 240 ml cap glass impinger, 1 No. condenser glass coil, 1 No. moisture bottle 400 ml & 1 No. cartridge tube accommodated in separate ice tray with instrument panel with a provision to cool down flue gas temperature.}

Approx. Rs 63,000 / PieceGet Latest Price

Stack Monitoring Kit (GVT-123)

Technical Specifications

·         Stack Temperature Range: - 0 - 600⁰C K type read on a digital pyrometer.

·         Stack Velocity range: - 3 to 60m/sec.

·         Particulate Sampling:- 0 – 30lpm for SPM

·         Filter Thimble: - collection of particulates down to 0.3 micron.

·         Gaseous Sampling: - 0 – 3lpm collection on set of Borosilicate glass impingers Rota meter acrylic Body with 2% accuracy.

·         Pitot tube: - Pitot tube modified “S-type” fabricated from SS 304 or equivalent grade. Piot tube 0.6 meter, extendable up to 1.2 meter.

·         Sampling Probe: - sampling probe fabricated from SS 304 tube. Suitable to hold either cellulose filtration thimble size (28mm ID X 100 long) or Glass micro fiber thimble size (19mm ID X 90mm long).

·         Nozzles: - A set of 3 Stainless steel nozzles. Nozzles fabricated with SS 304. The leading edge of the nozzles have sharp and tapered.

·         Thermocouple: - Thermocouple sensor provided with analog or digital dial gauge capable of measuring temperature from 0 – 600⁰C covered with steel casing.

·         Rota meters: - 0 – 30lpm for SPM Particulate Monitoring and 0 – 3lpm For Gaseous Monitoring.

·         Stop-Watch: - 0 – 60 minutes, one sec. readout with hold facility.

·         Impinger: - Four number 120ml (silica Gel) and 240ml (PM) PVC and 120ml (Gaseous) 2 Nos. Facility for keeping ice at bottom of impinger box.

·         Vacuum pump: - vacuum pump is rotary design, with capacity 60lpm gas flow with single phase motor, 220V. Vacuum pump assembly with electric cord more than 3m. Long.

Approx. Rs 80,080 / PieceGet Latest Price

Model No : VT-PS02

Parameter

Spectral range: 400 ~ 700nm

Measuring range: 0-4000µmol.m-2•s-1

Cable length: standard: 1.5m (can be

customized)

Response time: <1s (99%)

Working temperature: - 40° to 65°

Sensitivity: 15~70µv/µmol.m-2.s-1

Power supply and output method

Output signal:

Current: 4-20mA

Voltage: 200mV (default)

Digital: RS485
_____________________________

Model No : VT-PS01

Parameter

pectral range: 400 ~ 700nm

Measuring range: 0-2000µmol.m-2•s-1

Accuracy: 5% RDG +10dgts

Cable length: standard: 2.5m (can be

customized)

Response time: about 1s (99%)

Working temperature: - 40° to 80°

Sensitivity: 2~30µv/µmol.m-2.s-1

Power consumption: = 25mW@5V

Power supply and output method

Power supply: DC 4-15V or 24V

Output signal:

Current: 4-20mA/0-20mA;

Voltage: 0-5V/1-5V;

Digital: RS485/RS232 

Additional Information:

• Delivery Time: 2-3 weeks

Approx. Rs 22,960 / PieceGet Latest Price

Model No : VT-AP01

Measuring Range: 0~120Kpa

Accuracy ±1.5Kpa@25°C 75Kpa

Ingress Protection: IP65

Working Temperature -20~60°C

Working Humidity 0%-80%RH

Response time =1s

Stability =0.1Kpa/y

Power Supply: 10-30VDC

Output signal:

RS485 (Modbus protocol);4-20mA 

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 16,800 / PieceGet Latest Price

Model No : VT-AS01

Temperature: -40~80°C;

Humidity: 0%-100%RH;

Accuracy: ±0.5°C (25°C);

±3%RH(5%RH-95RH,25°C);

Ingress Protection: IP65

Power Supply: 10-30VDC

Output signal:

RS485 (Modbus protocol);4-20mA
________________________________

Model No : VT-AS02

Temperature Humidity Sensor Parameter:

Fan aspirated (optional)

Temperature Range:-40~100°C,

Resolution: 0.1°C

Accuracy: ±0.3℃ (Standard)

±0.2°C(High version)

Humidity Range:0~100%RH,

Resolution:0.1%RH

Accuracy: ±3%RH (Standard)

±1.8%RH (High version) 

Additional Information:

• Item Code: YH-1

Approx. Rs 98,000 / PieceGet Latest Price

spectral range:300~1000nm

Resolution:1W/m2

Measuring range: 0~1500W/ m2

Sensitivity: 7~14µV/W•m-2

Accuracy: ±4%

Cable length: Standard: 2.5 m □ other

Response time: <5s

Working environment: temperature: -40°C ~

85°C; humidity: = 100% RH

Power consumption: 400 mW

Power supply and output method

Power supply:

DC 5V /DC 12V /DC 24V

Output signal:

Current: 4～20mA/0-20mA

Voltage: 0～5V/ 0～2.5V

Digital: RS232/RS485

Model No : VT-SRS02

Parameter

Sensitivity: 7~14µV/w.m-2

Spectral range: 0.3-3µm

Measuring range: 0 ~ 2000W/m2

Cable length: Standard: 2.5 m □ other

Response time: = 35 s (99%)

Stability: = ± 2%

Temperature characteristics: ±2% (-10°C to

+40°C)

Working ambient temperature:-40°C ~ +50°C

Non-linear: = 2%

Power supply and output method

Power supply:

DC 5V /DC 12V /DC 24V

Output signal:

Current: 4~20mA/0-20mA

Voltage: 0~5V/ 0~2.5V

Digital: RS232/RS485

Approx. Rs 60,000 / PieceGet Latest Price

With the VT220 you have a versatile mobile environmental measuring device. It can be used to simultaneously detect not only the particle purity of the indoor air on six different size channels from 0.3 µm to 10 µm, but also gas concentrations of formaldehyde and carbon monoxide. It can further be deployed for determining climate data such as the air temperature, humidity, dew point temperature and wet-bulb temperature.

Moreover, due to the fact that the measuring device displays the particle masses directly as mass proportion in µg per m² of air, the PC220 is suitable for a quantitative determination of the concentration of airborne inhalable dust (PM10) and alveolar dust (PM2.5).

The standard equipment of this ISO-21501-4 compliant laser particle counter also includes an installed digital camera for documenting the measuring environment by means of photos and videos. The measurement data, date and time are also saved and indicated in both photos and videos to elucidate the measuring site.

The VT220 also comes with an integrated data logging function for non-stop measurements: up to 5,000 measurement records can be saved directly on the internal memory – which can be expanded additionally by up to 16 GB using a MicroSD card. After measuring, all detected data can be transmitted quickly and easily to a PC for the purpose of documentation or analysis via a USB interface.

Approx. Rs 18,500 / PieceGet Latest Price

Outsoles of footwear or other flexing components may suffer cracking in use due to flexing. Cracks usually develop at points of high surface strain resulting from the design of the sole pattern, without there being any cuts to initiates them. The Belt Flex Tester is designed to flex complete sales with their patterns intact in a manner similar to those encountered in actual use. Tests carried out using it provide a guide to the risk of such cracks developing during use. The test specimens are attached to the outside of a continuous belt, which is driven around two rollers. The large roller drives the belt while movement of the smaller roller is chosen to make the flexing somewhat more severe than is actual use. This form of flexing also closely simulates the actual bending at each step as it produces a short period of rapid flexing followed by a longer period when the specimen is not being flexed. A normal test consist of a number of flexing runs up to a total of 50,000 flexes, with an examination for cracking at the end of each run. The Belt Flex Tester consists of two roller on which a flat belt moves. The larger roller which is the driving roller rotates at a specified speed to give the specified frequency of flexing with the help of an electric motor and V-belt arrangement. The second roller, which is the flexing roller, rotates with the movement of the belt.The flexing rollers are slightly barrel-shaped so as to minimize sideways movement of the belt. A hand wheel is attached to the front end of these rollers to enable the belt to be moved by hand. The equipment is supplied with three flexing rollers, one for normal sales, the second for very flexible soles, and the third for very rigid soles.

The distance between the driving and the flexing rollers can adjust with the help of a screw arrangement to enable the belt to be mounted over different flexing rollers and to allow for small differences in belt length. This is done by turning a hand wheel on the side of the tester.The tester is fitted with an acrylic front cover and a wire mesh safety guard, which allows adequate circulation of cooling air around the test specimens during the test. For the safety of the user, the motor can be started only when the cover is closed.

Technical Specification:

Flexing frequency: 140 + 10 cycles/minute

Maximum eccentricity: 80 mm

Motor: 1/4 HP single-phase

Voltage: 230 V AC

Counter: Digital electronic counter

Additional Information:

• Delivery Time: 1-2 week

Approx. Rs 47,000 / PieceGet Latest Price

Environmental Humidity Chamber.

Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber consists of anodized aluminums or S.S. and outer wall of M S. sheet duly powder cotied paint. The gap of 75m.m. between the outer and inner wall is filled with special grade glass wool to prevent thermal losses. A self-cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber. Temp. Range from +05°C to 60 is controlled by micro presser based controller with an accuracy of + 5°C. Humidity is controlled through a p I d, thus controlling the desired set humidity Range from atmospheric humidity to 100% +5%.

Approx. Rs 3,950 / PieceGet Latest Price

Product Description

We have carved a niche amongst the most trusted names in this business, engaged in offering comprehensive range of Tong Tester. Since we have established our base in this highly competitive industry, we are readily engrossed in the arena of presenting an inclusive variety of Digital Tong Tester. Using best class basic material along with urbane tools, these are manufactured beneath the administration of skilled executives.

Specification : 

·         Display: 13 mm (0.5") LCD, 3 1/2 digits.

·         Max. indication 1999.

·         Measurement & Range: ACA, DCA, ACV, DCV, Resistance, Diode, Data hold, Peak hold.

·         Polarity: Automatic Switching, " - " indicates negative polarity

·         Current Sensor: Half effect sensor.

·         Sampling time: Approx. 0.4 second.

·         Dimension HWD : 230 x 70 x 36 mm.(9.1 x 2.8 x 1.4 inch)

·         Max. Conductor Size: 32 mm (1.3 inch) Dia.

·         Accessories: Operation manual,Test lead (red & black), carrying case .

Features:

·         Design meet IEC 1010 safety requirement.

·         Compact & heavy duty ABS housing plastic case.

·         Measure DCA & ACA on the inductive conductor.

·         Wide ranges ( 1000 A, 200 A ) for ACA/DCA measurement.

·         LSI circuit provides high reliability and durability.

·         Multi-functions for ACA, ACV, DCV, OHMS, Diode, Continuity beeper measurement.

·         LCD display allows clear readout even at high ambient light level.

·         Overload protection circuit is provided for all range.

Approx. Rs 6,500 / PieceGet Latest Price

Product Description

Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.

Feature:

· Basic dc accuracy 0.5%

· CAT III 600 V safety rated

· Diode and continuity test with buzzer

· Small lightweight design for one-handed use

· Rugged, durable design

· Automatic shutdown

· Battery is easy to replace

Specifications

Brand Name Fluke

Included Components T L75 test leads, 2AAA batteries (installed), user manuals, calibration certificate

Item Weight 140.0 grams

Model Number Fluke 101

Number of Items 1

Part Number 4367834

Special Features Basic dc accuracy 0.5% , CAT III 600 V safety rated , Diode and continuity test with buzzer , Small lightweight design for one-handed use , Rugged, durable design , Automatic shutdown , Battery is easy to replace ,

Approx. Rs 40,880 / PieceGet Latest Price

Model No : VT-ORS01

Parameter

Current Drain: 14mA@12VDC

Operating Temperature Range: -40°C ~ 60°C

Accuracy: ±15%

Unit:: 0.2mm/pulse

Max instantaneous :: 0.4mm/s

UART parameter: 115200 8N1

Power supply and output method

Power supply: 9V ~ 30VDC

Output: signal:

Relay closure/Pulse

Max load 1A,24VDC/5V High Pulse

Approx. Rs 3,950 / PieceGet Latest Price

Lux meters or light meters, (some with outputs), measure illumination in terms of luxes (lx) or foot candles (fc). A lux is equal to the total intensity of light that falls on a one square meter surface that is one foot away from the point source of light. A foot candle is equal to the total intensity of light that falls on a one square foot surface that is one foot away from the point source of light. Most lux meters or light meters consist of an instrument with a display and photo cell or light sensor. The light that falls onto the photo cell or sensor contains energy that is converted to electric current. In turn, the amount of current depends on the amount of light that strikes the photo cell or light sensor. Lux meters read the electrical current, calculate the appropriate value, and output the results to an analog, digital, or video display. Since light usually contains different colors at different wavelengths, the reading represents the combined effects of all the wavelengths. Typically, standard colors or color temperatures are expressed in degrees Kelvin (K). The standard color temperature for the calibration of most lux meters is 2856° K, an amount that is more yellow than pure white.

Selecting lux meters or light meters requires an analysis of performance specifications, display types, and special features. Performance specifications include photo cell or sensor diameter, illumination range, accuracy, lux resolution, foot candle resolution, humidity range, and operating temperature range. Typically, lux resolution and foot candle resolution are minimum amounts. Several display types are available. Analog devices display values on a dial, usually with a needle or pointer. Digital devices display values as numbers and/or letters. Video outputs use cathode ray tubes (CRT), liquid crystal displays (LCD) or other multi-line forms. Bargraph displays are also available. Some lux meters or light meters are portable, hand held devices. Others are designed to sit atop a desk or benchtop. Special features include backlit displays, low battery indicators, low voltage alarms, remote light sensors, built-in memory, and comparator functions.   

Lux meters or light meters are used to measure levels of light in schools, hospitals, production areas, laboratories, and passageways. They are also used to monitor light-sensitive displays in museums, art galleries and archives. In the United States, lux meters are used to ensure that workplace, clean room and industrial lighting complies with requirements from the Occupational Safety and Health Administration (OSHA). Other uses for lux meters or light meters include video, photographic, and architectural applications.

Features:

• 4000 counts with bar graph 61 segments
• Auto-ranging
• Automatic power off
• User selectable FC/Lux
• Peak hold
• Battery power indication
• Maximum data hold

Applications:

• Railways
• Electricity board
• Defence establishments
• Photography industry

Standard Accessories:

• Soft Carrying Case
• Gift Box
• Manual Photo Detector
• USB Cable
• CD Software

Approx. Rs 12,500 / PieceGet Latest Price

This cone is used to find out viscosity of Bentinite slurry and like material. The Marsh Cone is 6 inch in diameter at the top and 12 inch long, and tapers to join a tube 2 inch long and 3/16 inch inside dia. The capacity of the funnel is 1500 cc. Time in seconds required to flow out 1000 cc of slurry from cone is measured as funnel viscosity of the material.

Approx. Rs 3,500 / PieceGet Latest Price

Description:
100% brand new and high quality 
Used to prevent dog attacks, issue ultrasound to repel the dog or wild wolf.
In normal situation, it can be used as a normal flashlight to illuminate at night. 
Ultrasonic wave reaches up to 125db. Audible to dogs but not to human.
Effectively target animals up to 20m away.
Can also be used as dog training device.
Model: VT-651
Housing material: plastic
Size: 13.5*5.7*3cm
Color: black 
Power: 1*9V battery (Not included)
Suitable users: joggers, walkers, bicyclists, delivery people, police. 
Package includes: 
1x ultrasonic dog chaser
1x English user manual

Approx. Rs 9,500 / PieceGet Latest Price

Our company has gained immense accolades in providing Manometer Digital to clients segregated in various sectors. We are equipped with the highly experienced team of the trainers, who diligently processed the offered range of Manometer Digital in an accurate manner. Products range we offer render maximum clients satisfaction. Further we are delivering our entire range of products as per the specifications given by our clients. Our entire product ranges have a long service life and also increase satisfaction level of the user. All our products are available at industry leading prices.

Features:

• Energy efficiency
• Effective performance
• Easy installation

Approx. Rs 45,000 / PieceGet Latest Price

Approx. Rs 1.15 Lakh / PieceGet Latest Price

Fabricated out of thick wooden board these are designed so as to thro-out al toxic/harmful vapours, thus protecting costly instruments and the person working in the lab. Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acid/alkali resistant tiles and a small wash basin with connections provided for inlet the outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit is fitted with flourescent light and a gas cock for gas/air supply. The space under the work station can be provided with storage compartments for storage purpose at an extra cost (See Optional Accessories). The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and flourescent light. To work on 220/230 volts A.C. Supply.

(a)                 Exhaust System (Complete)

(b)                 PVC Fume Duct (per ft.)

(c)                 Storage Compartments

(d)                 FRP/S.S. Lining on working walls.

Approx. Rs 39,500 / PieceGet Latest Price

• Yarn Tension Meter has been designed specifically to fulfill the needs of fast-growing textile industry. It is completely made of fiber to give lightweight & robust structure. Specially designed two outer pulleys to support the moving yarn & the central pulley to press the yarn while red knob or trigger is relished, the specially designed analog dial gives the tension directly in gms

• Specially designed equipment to determine tension of moving yarn in knitting & weaving machines
• Latest model with sophisticated design
• handy can be carried anywhere
• Smooth precision-engineered mechanism
• Simple mechanism & easy operation
• Duly packed in wooden box for safety & easy transport

Approx. Rs 12,500 / PieceGet Latest Price

Product Description

Stroboscope Lutron DT-2239A

Description:
The model DT-2239A is a microprocessor circuit design, high accuracy, digital readout, light duty Stroboscope/tachometer that is ideal for inspecting and measuring the speed of moving gears, fans, centrifuges, pumps, motors and other equipment used in general industrial maintenance, production, quality control, laboratories and as well as for schools and colleges for demonstrating strobe action.

Specifications:

·         Stroboscopic Flash Rate: 100 to 10,000 flashes per minute (FPM).

·         Accuracy:

·         100 to 5,000 FPM/RPM) -± 1 digit.
over 5000 FPM/RPM - ± 0.05% .

·         Resolution:Less than 10,000 FPM/RPM-1 FPM/RPM.

·         Over 10,000 FPM/RPM - 10FPM/RPM

·         Range Select:Automation.

·         Circuit:This stroboscope/tachometer employs an custom one-chip of microcomputer LSI circuit & crystal control time base which results in extraordinary accuracy over a wide, dynamic range

·         Housing:Compact and impact plastic, injection case with plastic,mirror type reflector.

·         Calibration:Crystal time base and microprocessor circuit, don't necessary take any external calibration process.

·         Accessories Included:Operation Manual

Additional Information:

• Delivery Time: 1 week

Approx. Rs 5,500 / PieceGet Latest Price

Features:

• Large LCD display, easy to read
• Max. Hold function for stored the maximum value on display
• Frequency weighting networks are designed to meet the IEC 651 type
• Warning indicator for over and under load
• LCD display for low power consumption & clear read-out even in bright ambient light
• A & C weighting networks are conformity to standards
• Time weighting (FAST & SLOW) dynamic characteristic modes
• Used the durable, long-lasting components, including a strong, light weight ABS-plastic housing case
• AC/DC output for system expansion
• Build in adj. VR is available for easy calibration
• Small and lightweight design allow one hand operation
• Condenser microphone for high accuracy & long-term stability
• Low battery indicator

Specifications:

• Functions - dB (A & C frequency weighting), Time weighting (Fast, Slow), Max. hold, AC & DC output